Click to Enlarge
|
Flash Gordon (Bally) Wood Beast Plastic (USED):
Price: $20.00 each
Status: In Stock
(1 Available)
Part #: U1252
Condition: Used - Fair/Good
|
|
|
Used playfield plastic for Bally Flash Gordon pinball. Bally part # M-1330-180-3. Spans upper and lower playfields and mounts over inline drop targets on left side of lower playfield.
Used part in fair/good condition. Small chip off upper right corner at screw hole. Some ink is worn away on the underside near the top left from the ball coming up the shooter lane (approx. 2 inches long, 3/8 inches wide). Some minor warping from having been installed for some time, and some minor scuffs on back side from normal use (see additional image below).
Additional Images: Click to Enlarge
NOTE: No warranty or returns on used items. Used items are sold as-is, and all sales are final.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Flash Gordon
|
Flash Gordon (Bally) Playfield Plastics Set (USED) (SEE NOTE)
|
|
|
Cap Nut - White Nylon
|
Part # HWR01-040600
$0.29 each |
|
|
Flash Gordon (Bally) Left Slingshot Plastic (USED)
|
|
|
Flash Gordon (Bally) Right Slingshot Plastic (USED)
|
|
|
Flash Gordon (Bally) Left Lower Drop Target Bank Plastic (USED)
|
|
|
Flash Gordon (Bally) Left Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Left Center Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Ming Plastic (USED)
|
|
|
Flash Gordon (Bally) Right Center Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Right Center Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Bonus Advance Targets Plastic (USED)
|
|
|
Flash Gordon (Bally) Bonus Advance Targets Plastic (USED)
|
|
|
Flash Gordon (Bally) Upper Left Playfield Clear Plastic (USED)
|
|
|
Flash Gordon (Bally) Upper Right Playfield Clear Plastic (USED)
|
|
|
Flash Gordon (Bally) Upper Right Corner Playfield Plastic (USED)
|
|
|
Flash Gordon (Bally) Rubber Ring Kit
|
Part # KIT099
$16.17 each |
|
|
Flash Gordon (Bally) Game Manual & Schematics
|
Part # PM0155
$26.32 each |
|
|
Bally Games FO-560-3 Service / Repair Manual
|
Part # PM0078
$32.74 each |
|
|
Bally Theory of Operation Manual FO-601-2 (May 1982) (REPRINT)
|
Part # PM0080
$17.62 each |
|
|
Flash Gordon (Bally) Score & Instruction Card Set (2pcs)
|
|
|
Flash Gordon (Bally) Strobe Light Parts Replacement Kit (4pcs) (SEE NOTES)
|
Part # KIT_FG_XFT
$27.63 each |
|
|
Orange Star Rollover Housing w/ White Star Button
|
Part # C-900901-O
$2.99 each |
|
|
Flash Gordon (Bally) Drop Target Set w/ Decals (11pcs)
|
Part # A-3944-FG
$55.00 set |
|
|
Flash Gordon (Bally) Spinner Decal Set (4pcs)
|
|
|
Flash Gordon (Bally) Pop Bumper Cap Set (3pcs)
|
Part # A-3713-68-SET
$33.99 set |
|
|
Flash Gordon (Bally) Left Ball Guide - Inline Drop Target Lane (USED)
|
|
|
Pop Bumper Body - Early / Vintage Games (USED)
|
|
|
Yellow Round Standup Target Switch Assembly (Bally) (USED)
|
|
|
Shooter Lane Bracket (Bally) (USED)
|
|
|
Orange Star Rollover Housing w/ White Star Button (USED)
|
|
|
Apron Mounting Bracket - Deep / 2-Level Playfields (Bally) (USED)
|
|
|
Varistor Info Card for Cabinet (Bally)
|
|
|
Factory Inspection Card for Cabinet (Bally)
|
|
|
Protector - Ball Shooter Lane (Bally)
|
|
|
Pop Bumper Top Assembly - Older/Vintage Games (SEE NOTE)
|
Part # ASE-2222-4
$16.19 each |
|
|
Pop Bumper Assembly (Bally SS) w/ AE-26-1200 Coil (SEE NOTE)
|
Part # POP_ASSY2
$52.29 each |
|
|
Pop Bumper Rebuild Kit - Vintage Games - Most Makes/Models
|
Part # KIT_POPRBD2
$20.19 each |
|
|
Flipper Rebuild Kit - Left Side Only - Bally Games 1980-1988
|
Part # FLKIT6-L
$45.58 each |
|
|
Flipper Bat & Shaft - 3-Inch White - Bally Games (Early)
|
Part # A-3994-5
$7.59 each |
|
|
Flipper Cap - 2-Inch - RIGHT w/Blue FLIPPER
|
|
|
Red Flipper Rubber Ring - Large
|
Part # RINRFLP
$0.89 each |
|
|
Flipper Assembly - Linear - Right (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES)
|
Part # ASE-1587-111-A
$117.16 each |
|
|
Flash Gordon (Bally) Game ROM Chip U2 (2532 EPROM)
|
Part # ROMS117
$18.00 each |
|
|
Alltek Ultimate MPU Game ROM
|
Part # ROMS474
$21.00 each |
|
|
Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES)
|
Part # FKBLYSS
$9.74 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 127 Pieces
|
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
C23 Capacitor Replacement Kit - Bally/Stern Games (1977-1985)
|
Part # KITC23CAP
$10.77 each |
|
|
Bally / Stern 6-Digit LED Display
|
|
|
#44 Lamp (Box of 10)
|
|
|
#47 Lamp (Box of 100)
|
Part # LAM047C
$20.00 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED Conversion Adapter Kit for Bally / Stern Main Lamp Driver Board (SEE NOTES)
|
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #44 / #47 4-Element (SEE NOTES)
|
Part # LED4044
$1.25 & up |
|
|
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED044D
$1.19 & up |
|
|
LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED044F
$1.29 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Game Lock With Keys - 1-1/8 Inch - Single-Bitted
|
Part # LOCKSB118
$6.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$5.00 each |
|
|