Twilight Zone (Bally) Gumball Machine Motor and Gearbox Assembly
Part # 14-7984
Condition: New
Motor and gearbox assembly for Gumball Machine mechanism on Bally Twilight Zone... more
|
|
Twilight Zone (Bally) Mini Playfield Switch Cover - Gray Vinyl
Part # 20-9860
Condition: New
Discontinued - can substitute # 20-9672. Gray rubber/vinyl switch cover that fits... more
|
|
Twilight Zone (Bally) Mini Playfield Switch Cover - Gray Vinyl (USED)
Part # 20-9860U
Condition: Used - Excellent
Used original gray rubber/vinyl switch cover that fits over exposed microswitches on the upper mini playfield on Bally... more
|
|
Twilight Zone (Bally) Sound Board Assembly - Complete
Part # A-12738-50020
Condition: New
Sound board assembly used in Bally Twilight Zone pinball. Includes circuit board populated with all components and ROM... more
|
|
Twilight Zone (Bally) MPU Board Assembly
Part # A-12742-50020
Condition: New
MPU board assembly used in Bally Twilight Zone... more
|
|
Twilight Zone (Bally) Clock PC Board (USED - NON-WORKING)
Part # A-16219-20U
Condition: New
Used original clock PC board set (2-pc assembly) from Bally Twilight Zone pinball. Used item in non-working... more
|
|
Twilight Zone (Bally) Clock PC Board - Aftermarket Replacement
Part # A-16219-1PC
Condition: New
Improved aftermarket replacement board with LED lighting for reduced heat buildup and longer life. This is a single PC... more
|
|
Twilight Zone (Bally) Mini Playfield Exit Opto Assembly
Part # A-16326
Condition: New
Assembly with metal bracket and opto emitter and receiver units. Used at exit of mini playfield on Bally Twilight Zone... more
|
|
Twilight Zone (Bally) Door Feature Lamp PC Board
Part # A-16327
Condition: New
Lamp PC board for Door panel on Bally Twilight Zone... more
|
|
Twilight Zone (Bally) 3-Lamp PCB Assembly
Part # A-16329
Condition: New
3-lamp PC board assembly used on Bally Twilight Zone... more
|
|
Twilight Zone (Bally) Ball Trough Sensor Board
Part # A-16528
Condition: New
Ball trough sensor PC board used on Bally Twilight Zone pinball. Circuit board with components/connector pins only- no... more
|
|
Twilight Zone (Bally) Ball Trough Sensor Board and Bracket Assembly
Part # A-16533
Condition: New
Ball trough sensor PC board used on Bally Twilight Zone pinball. Includes metal mounting bracket connected to PC... more
|
|
Twilight Zone (Bally) Ball Trough Sensor and Driver Board Kit
Part # A-16534K
Condition: New
This new aftermarket replacement kit replaces original driver board # A-16534, sensor board # A-16533, and sensor coil #... more
|
|
Twilight Zone (Bally) Clock Motor
Part # A-16652
Condition: New
New motor with drive gear for clock assembly on Bally Twilight Zone... more
|
|
Twilight Zone (Bally) 10-Opto Switch PC Board
Part # A-16807
Condition: New
10-opto switch driver pcb assembly used in Bally Twilight Zone pinball. Includes 5768-13536-00... more
|
|
Twilight Zone (Bally) Ball Popper Opto Cable
Part # H-16606
Condition: New
Wiring harness with connector for opto units on ball popper assembly used on Bally Twilight Zone... more
|
|
Twilight Zone (Bally) Clock Cable
Part # H-16600
Condition: New
Clock cable wiring harness used on Bally Twilight Zone... more
|
|
Switch Cover Mounting Clip (Bally/Williams)
Part # 01-10636
Condition: New
Metal clip for mounting rubber/vinyl microswitch cover. Clip mounts on side of... more
|
|
Microswitch with Blade Actuator 2-1/4 Inch
Part # 5647-12693-08
Condition: New
Microswitch body with straight flat blade actuator measuring 2-1/4 inches length. Fits some Bally and Williams games... more
|
|
Microswitch with Blade Actuator
Part # 5647-12693-13
Condition: New
Microswitch body with blade actuator. Used on select Bally and Williams games.
|
|
Opto Emitter/Receiver Assembly - Long Leads (Bally/Williams) (SEE NOTE)
Part # 5490-12451-00
Condition: New
Opto emitter/receiver assembly with long leads. Found on clock minute PCB in Bally Twilight Zone pinball, and... more
|
|
Microswitch with Wireform Actuator
Part # 5647-12693-55
Condition: New
Microswitch body with wireform actuator. Used on Bally Twilight Zone... more
|
|
Ribbon Cable - 26-pin 14-inch 2-connector
Part # 5795-10938-14
Condition: New
Discontinued - can use # 5795-10938-16 as replacement. 2 connectors.... more
|
|
Ribbon Cable - 34-pin 22-inch 4-connector
Part # 5795-13018-00
Condition: New
Discontinued- use # 5795-13018-01 as replacement. 4 connectors at 4, 10, and 8... more
|
|
Ribbon Cable - 34-pin 23.5-inch 4-connector (SEE NOTES)
Part # 5795-13018-01
Condition: New
4 connectors at 4, 10, and 8 inch intervals. 34 pins per connector. 23-1/2 inch length. Connectors face same... more
|
|
Battery - Alkaline - AA Size - 1.5V
Part # 5A-9022
Condition: New
1.5V AA size battery, alkaline, major name brands (brands vary depending on availability). Measures approx. 14.5mm... more
|
|
Hanger Bracket - Plumb Bob Tilt (Williams)
Part # 01-3444
Condition: New
Brass hanger bracket for plumb bob tilt mechanism. Mounts to cabinet wall/panel with two (2)... more
|
|
Ring Bracket - Plumb Bob Tilt (Williams)
Part # 01-3445
Condition: New
Brass contact ring bracket for plumb bob tilt mechanism. Mounts to cabinet wall/panel with two (2)... more
|
|
Switch Plate - Flat (Bally/Williams)
Part # 01-3670-1
Condition: New
Flat metal switch stack plate for some Bally and Williams games.
|
|
Nut Plate - #2-56 Threaded - for Small Microswitch (Bally/Williams)
Part # 01-8240
Condition: New
Small threaded nut plate for securing screws to hold small microswitches. Fits many later-model Bally and Williams games. Screw... more
|
|
Switch Mounting Bracket (Bally/Williams)
Part # 01-9476-2
Condition: New
Ramp switch bracket for many late-model Bally and Williams games. Mounts on top of ramp and ball rolling underneath actuates... more
|
|
Switch Mounting Bracket (Bally/Williams) (USED)
Part # 01-9476-2U
Condition: New
Used ramp switch bracket for many late-model Bally and Williams games. Mounts on top of ramp and ball rolling underneath... more
|
|
Box - IEC 300 Power Inlet (Bally/Williams)
Part # 01-10715
Condition: New
Power input connector box for some later-model Bally and Williams games. Features IEC input connector for line cord connection.
|
|
Connector Housing (5-PACK) - 1-Position Female In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-1011-5PK
Condition: New
Set of 5 housings. Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in... more
|
|
Connector Housing (5-PACK) - 1-Position Male In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-2011-5PK
Condition: New
Set of 5 housings. Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in... more
|
|
Connector Housing - 2-Position Female In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-1023
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 2-Position Male In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-2023
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 3-Position Female In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-1032
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 3-Position Male In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-2032
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 4-Position Female In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-1042
Condition: New
Molex connector housing which holds 0.062-inch diameter terminals and is polarized to... more
|
|
Connector Housing - 4-Position Male In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-2042
Condition: New
Molex connector housing which holds 0.062-inch diameter terminals and is polarized to... more
|
|
Connector Housing - 4-Position Female Block - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-1044
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 4-Position Male Block - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-2044
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 5-Position Female In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-1056
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 5-Position Male In-Line - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-2055
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 6-Position Female Block - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-1062
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 6-Position Male Block - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-2061
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 9-Position Female Block - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-1092
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 9-Position Male Block - 0.062 Inch Polarized (SEE NOTE)
Part # 03-06-2092
Condition: New
Molex connector housing which uses 0.062-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 3-Position Female In-Line - 0.093 Inch Polarized (SEE NOTE)
Part # 03-09-1032
Condition: New
Molex connector housing which uses 0.093-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 3-Position Male In-Line - 0.093 Inch Polarized (SEE NOTE)
Part # 03-09-2032
Condition: New
Molex connector housing which uses 0.093-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Connector Housing - 9-Position Male Block - 0.093 Inch Polarized (SEE NOTE)
Part # 03-09-2092
Condition: New
Molex connector housing which uses 0.093-inch diameter connector pins and is polarized to fit together in only one direction.... more
|
|
Opto Base Mounting - Black (Bally/Williams)
Part # 03-8506
Condition: New
Black plastic housing for receiver opto PCB on many Bally and Williams pinball games.
|
|
Opto Base Mounting - White (Bally/Williams)
Part # 03-8506-1
Condition: New
White plastic housing for emitter opto PCB on many Bally and Williams pinball games.
|
|
Flipper Button Opto Interrupter - Type 2 (Bally/Williams)
Part # 03-9001.1
Condition: New
Plastic interrupter for opto PCB for flipper buttons on late-model Bally and Williams games. Black plastic. Replaces black or... more
|
|
Tilt Hanger Rod / Wire - 7/64 x 4-3/4 Inch Threaded
Part # 12-6231
Condition: New
Threaded rod/wire for plumb bob tilt mechanisms. Measures 7/64 inch diameter, 4-3/4 inch overall length. Fits many makes... more
|
|
Tilt Hanger Rod / Wire - 7/64 x 4-3/4 Inch Threaded (USED) (SEE NOTE)
Part # 12-6231U
Condition: Used
Used threaded rod/wire for plumb bob tilt mechanisms. Measures 7/64 inch diameter, 4-1/2 inch overall length. As used in many... more
|
|
Tilt Plumb Bob - 5/32 Inch Center Hole (SEE NOTE)
Part # 20-6502A
Condition: New
Graphite tilt plumb bob for many late-model Bally and Williams pinball games. 5/32-inch diameter center hole. ... more
|
|
Switch Cover - Gray Vinyl 1/2 x 7/8 x 1-Inch (Bally/Williams)
Part # 20-9672
Condition: New
Discontinued - can substitute aftermarket replacement cover # 20-9672-A. Gray... more
|
|
Switch Cover - Gray Vinyl 1/2 x 7/8 x 1-Inch - Aftermarket Replacement
Part # 20-9672-A
Condition: New
New aftermarket replacement part. Gray rubber/vinyl switch cover that fits over exposed microswitches on ramps and other... more
|
|
Header Pin Connector - 3-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1035
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-03. ... more
|
|
Header Pin Connector - 4-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1045
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-04, Molex #... more
|
|
Header Pin Connector - 5-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1055
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-05. ... more
|
|
Header Pin Connector - 6-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1065
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-06. ... more
|
|
Header Pin Connector - 7-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1075
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams #s 5791-10862-07 &... more
|
|
Header Pin Connector - 8-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1085
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-08. ... more
|
|
Header Pin Connector - 9-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1095
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-09, Molex #... more
|
|
Header Pin Connector - 11-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1115
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-11. ... more
|
|
Header Pin Connector - 12-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1125
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-12. ... more
|
|
Header Pin Connector - 13-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1135
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-13. ... more
|
|
Header Pin Connector - 15-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1155
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally # E-736-15 and Bally/Williams #... more
|
|
Header Pin Connector - 18-Position - 0.156 Inch Spacing Break-Away w/Lock
Part # 26-48-1185
Condition: New
Header pin connector, 0.156-inch spacing, break-away, with friction lock. Replaces Bally/Williams # 5791-10862-18. ... more
|
|
1N5817 Diode
Part # 1N5817
Condition: New
20-volt 1-amp diode for many late-model Bally and Williams games. Replaces Bally/Williams # 5070-09266-00, Williams # 5A-9266,... more
|
|
Power Switch - Toggle w/ Solder Lugs
Part # 2GK50-73
Condition: New
Main power on/off switch for most makes and models of pinball and video games- old and new. Heavy-duty double-pole,... more
|
|
2N4403 Transistor
Part # 2N4403
Condition: New
PNP pre-driver transistor often paired with TIP102, TIP120,... more
|
|
Opto Switch Receiver Element (Bally/Williams)
Part # 5163-14114-00
Condition: New
Special-order item. Or use less-expensive # OPTO_RECEIVER as substitute. ... more
|
|
IC - MC3340 Electronic Attenuator (Bally/Williams)
Part # 5370-12260-00
Condition: New
Special-order item. Call or e-mail for pricing/availability. 8-pin DIP electronic attenuator chip used in some... more
|
|
IC - Digital-to-Analog Converter (Bally/Williams)
Part # 5371-11087-00
Condition: New
Audio converter chip used in some Bally and Williams games. Replaces # YM3012.
|
|
MPU Board ASIC Chip (Bally/Williams)
Part # 5410-12426-00
Condition: New
Discontinued - superceded by # 5410-12426-01 ASIC chip at location U9 on... more
|
|
MPU Board ASIC Chip (Bally/Williams)
Part # 5410-12426-01
Condition: New
ASIC chip at location U9 on Bally/Williams WPC MPU boards in games between approx. 1990-1999 (MPU board # A-12742-xxxxx). See... more
|
|
X9503 EE PROM Potentiometer IC (Bally/Williams)
Part # 5432-12726-00
Condition: New
8-pin DIP integrated circuit potentiometer used on sound board in many later-model Bally and Williams games. If your volume... more
|
|
Opto Emitter/Receiver Assembly
Part # 5490-13451-00
Condition: New
Discontinued - can use # 5490-12451-00 as replacement. Replaces Williams #... more
|
|
Opto Emitter/Receiver Assembly - Flipper - 5-Lead (Bally/Williams)
Part # 5490-14575-00
Condition: New
5-lead opto emitter/receiver assembly as used on factory-original and some aftermarket flipper opto PC boards used in some... more
|
|
Speaker - 6-1/2-Inch (6-inch cone) 4 Ohms 30 Watts - 4-3/8-inch Hole Spacing (SEE NOTES)
Part # 5555-12929-00
Condition: New
Replacement main cabinet speaker for some makes/models of pinball games (see game listing below). 6-1/2 inch overall... more
|
|
Transformer (Bally/Williams) WPC-89 Pinball Games
Part # 5610-12835-00
Condition: New
Main power transformer used in Bally & Williams WPC-89 pinball games from approx. 1990-1994.
|
|
Large Microswitch with Actuator Blade (Bally/Williams)
Part # 5647-12073-10
Condition: New
Discontinued - may be able to use # 5647-12133-11 as replacement. Large... more
|
|
Large Microswitch - No Actuator (SEE NOTE)
Part # 5647-12133-00
Condition: New
Large microswitch without actuator. Applications include start buttons on pinball games and most buttons on later-model video... more
|
|
Large Microswitch with Actuator Blade (Bally/Williams) (SEE NOTES)
Part # 5647-12133-11
Condition: New
Replacement microswitch body with actuator blade. Replaces discontinued/obsolete factory part # 17-1012 (see note below).... more
|
|
Large Microswitch with Looped Actuator Blade
Part # 5647-12133-12
Condition: New
Large microswitch body with actuator blade mounted in forward position on switch body. Applications include ball outhole... more
|
|
Microswitch Body - Small - With/Without Diode (Bally/Williams)
Part # 5647-12693-00
Condition: New
Small microswitch body. No wire/blade actuator (re-use your old actuator). Available with or without diode (select above when... more
|
|
Microswitch with Wireform Actuator
Part # 5647-12693-04
Condition: New
Microswitch body with wireform actuator. Many applications, including rollover lanes and plunger lane on most makes and... more
|
|
Microswitch With Blade Actuator 1-1/2 Inch
Part # 5647-12693-11
Condition: New
Standard microswitch unit with removable blade actuator. Blade measures 1-1/2" (38mm). Available with or without diode attached... more
|
|
Microswitch with Wireform Actuator
Part # 5647-12693-25
Condition: New
Microswitch body with wireform actuator. Typically found on ramp switches, ball troughs, and similar devices. Available... more
|
|
Microswitch with Wireform Actuator (Bally)
Part # 5647-12693-53
Condition: New
Microswitch body with offset wireform actuator. Used on some late-model Bally pinball games.
|
|
Microswitch with Actuator (Bally)
Part # 5647-12693-54
Condition: New
Discontinued - may be able to substitute # 5647-12693-04, or #... more
|
|
Chip Socket - PLCC 84 Pin
Part # 5700-12424-00
Condition: New
84-pin PLCC chip socket.
|
|
Heat Sink - Triac - WPC Power/Driver Board (Bally/Williams)
Part # 5705-12638-00
Condition: New
Heat sink for general-illumination triacs, as used on Bally/Williams WPC power/driver boards. Mounts to triac and helps... more
|
|
Heat Sink - Dual Bridge Rectifier - WPC Power/Driver Board (Bally/Williams)
Part # 5705-12698-00
Condition: New
Aluminum heat sink for two bridge rectifiers. Used over BR1 and BR2 on power/driver board in early Bally / Williams WPC... more
|
|
Fuse Holder - Panel Twist-In Style - for 1/4 x 1-1/4 Inch Fuses
Part # 5733-12869-00
Condition: New
Discontinued - substitute # FUSEHLDR4 as replacement. Twist-in fuse holder assembly... more
|
|
Sound Board - Bare/Unpopulated (Bally/Williams)
Part # 5766-12433-04
Condition: New
Sound circuit board used in many late-model Bally and Williams games. Bare circuit board only- unpopulated - no components.
|
|
Pinball Parts
