| Twilight Zone (Bally) Display / Speaker Panel Cover
Part #: 31-1420-50020
Condition: New
Plastic speaker / display cover plastic with silkscreened artwork used on Bally Twilight Zone pinball. New reproduction... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Ball Shooter Internal Spring (Low Strength)
Part #: 10-148-6
Condition: New
Low strength plunger spring. 0.26-inch diameter wire. Used on games with short plunger/skill shots like Twilight Zone.... more
In Stock
$1.05 each Order | Details | Related Items |
|
| Ball Shooter Assembly w/ Black Knob
Part #: A-17730
Condition: New
Complete ball shooter assembly with chrome housing and black shooter knob. Can be used as replacement on many later-model Bally... more
In Stock
$36.93 each Order | Details | Related Items |
|
| Mounting Plate - Ball Shooter Housing (Bally/Williams)
Part #: 01-3535
Condition: New
Discontinued - occasionally available used (part # U944. Or use Stern #... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
|
| Nest Bracket - Coin Box (Bally/Williams)
Part #: 01-6389-1
Condition: New
Holding bracket for coin box. Mounts inside of cabinet behind coin box location.
Out of Stock
$8.09 each Details | Related Items |
|
| Cabinet Ventilation Grille - Metal (Bally/Williams)
Part #: 01-6645
Condition: New
Metal grille used at top of backbox rear for ventilation in many Bally and Williams games from 1977-up. Measures 19 inches wide... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
|
| Bracket - Backbox Insert Stop (Bally/Williams)
Part #: 01-6652
Condition: New
Stop bracket for backbox insert panel. Used in many later-model Bally/Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Latch - Backbox Insert Door Securing (Williams) (USED)
Part #: 01-6655U
Condition: Used
Latch used on insert panel to secure panel in closed position. Used part in good condition.
Out of Stock
$4.00 each Details | Related Items |
|
| Strike Plate - Replay Knocker (Bally/Williams)
Part #: 01-7525
Condition: New
Metal striker plate for replay knocker assembly, as used in many later-model Bally and Williams games. Can also be used in... more
In Stock
$3.50 each Order | Details | Related Items |
|
| Plate - Backbox Latch (Bally/Williams)
Part #: 01-8397-1
Condition: New
Replacement latch plate for backbox as used on many makes/models of pinball games. This is a generic aftermarket part that can... more
In Stock
$2.09 each Order | Details | Related Items |
|
| Bracket - Speaker/Display Panel Support (Bally/Williams)
Part #: 01-8535
Condition: New
Support bracket for speaker/display panel, as used in many Bally and Williams games from late 1980s to mid 1990s. Mounts to... more
In Stock
$7.70 each Order | Details | Related Items |
|
| Plate - Backbox Hinge Mounting (Bally/Williams)
Part #: 01-9012
Condition: New
Used on Bally & Williams games approx. 1988-up. Two used per game. This plate sits in the backbox and the 3 carriage bolts from... more
In Stock
$10.70 each Order | Details | Related Items |
|
| Plate - Backbox Hinge Mounting (Bally/Williams) (USED)
Part #: 01-9012U
Condition: Used
Used backbox mounting / reinforcing bracket used on Bally & Williams games approx. 1988-up. Two used per game. This plate sits... more
Out of Stock
$2.50 each Details | Related Items |
|
|
| Stop Bracket - Backbox Insert Door Panel (Bally/Williams)
Part #: 01-9047
Condition: New
Stop bracket for backbox insert panel latch. Used on many later-model Bally and Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Plate - Backglass Lock Mounting (Bally/Williams)
Part #: 01-9519
Condition: New
Mounting plate for backglass lock as used on Bally & Williams pinball games- late model. Mounts at top/front of backglass and... more
In Stock
$2.69 each Order | Details | Related Items |
|
| Bracket - Coin Door Service Button Mounting (Bally/Williams)
Part #: 01-9885
Condition: New
Metal bracket for mounting 4-position service button assembly to inside of coin door. Used on many later-model Bally and... more
Out of Stock
$11.49 each Details | Related Items |
|
|
| Shield - Wire Protect (Bally/Williams)
Part #: 01-9980
Condition: New
Wire protect shield used in some Bally, Midway, and Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| AC Line Cord Cover (Bally/Williams)
Part #: 01-10714
Condition: New
Black metal cover plate that goes on back of main cabinet and holds/protects line cord where it enters cabinet. Used on... more
In Stock
$15.19 each Order | Details | Related Items |
|
|
| Interrupter Arm - Metal - Flipper Opto (Bally/Williams)
Part #: 01-11250
Condition: New
Metal flipper opto interruptor arm. Used on Bally/Williams flipper button opto assembly # A-15878. Mounts to bracket using two... more
Out of Stock
$3.85 each Details | Related Items |
|
| Leg Bolt Plate - Heavy-Duty - Large (Bally/Williams)
Part #: 01-11400-1
Condition: New
Heavy-duty leg bolt mounting plate used in some late-model Bally/Williams games. Can also be used in older games and other... more
In Stock
$8.49 each Order | Details | Related Items |
|
|
| Switch Actuator - Service (Bally/Williams)
Part #: 01-11791
Condition: New
Service switch actuator used on some late-model Bally/Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Playfield Pivot Sleeve Nut - 11/16-Inch
Part #: 02-4329-2
Condition: New
Threaded sleeve nut that mounts on inside of main cabinet wall and acts as a pivot or slide pin for the playfield. Attaches to... more
In Stock
$4.88 each Order | Details | Related Items |
|
| Nut - Sleeve - Backbox Hinge (Bally/Williams)
Part #: 02-4352
Condition: New
Black sleeve nut with hex wrench opening used to secure backbox hinge on main cabinet side from interior cabinet side on Bally... more
In Stock
$4.19 each Order | Details | Related Items |
|
|
| Side Rail Plastic Channel Trim 42-1/4 Inch (Bally/Williams)
Part #: 03-7135-1
Condition: New
Black plastic channel used to hold playfield glass in place. Measures 42-1/4 inches long, 5/8 inches wide. Mounts along top... more
Out of Stock
$12.95 each Details | Related Items |
|
| Coin Box - Plastic (Bally/Williams)
Part #: 03-7626
Condition: New
Plastic coin box for later-model Bally and Williams games, approx. 1990 and up. These boxes came in various colors. Most were... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Red Service Button Cap (Bally/Williams) 3/8 x 9/16-Inch
Part #: 03-7601-4
Condition: New
Red plastic cap for service/test buttons used on inside of some brands of coin doors on many later-model Bally and Williams... more
In Stock
$1.25 each Order | Details | Related Items |
|
| Black Service Button Cap (Bally/Williams) 3/8 x 9/16-Inch
Part #: 03-7601-7
Condition: New
Black plastic cap for service/test buttons used on inside of some brands of coin doors on many later-model Bally and Williams... more
In Stock
$1.25 each Order | Details | Related Items |
|
| Channel - Playfield Glass Top - Widebody Width (Bally / Williams)
Part #: 03-8091-2
Condition: New
Black plastic trim channel that sits at the top (back end) of the playfield glass. Fits wide-body (Superpin) late-model Bally &... more
In Stock
$11.95 each Order | Details | Related Items |
|
|
| Channel - Playfield Glass Top - Widebody Width (Bally / Williams) (USED)
Part #: 03-8091-2U
Condition: Used
Used black plastic trim channel that sits at the top (back end) of the playfield glass. Fits wide-body (Superpin) late-model... more
In Stock
$9.95 each Order | Details | Related Items |
|
| Trim Channel - Top 27-Inch (Bally/Williams)
Part #: 03-8228-2
Condition: New
Black plastic backglass top edge Trim - 27 inches long. Fits 1/8-inch thick backglasses in some late-1980s Williams games with... more
In Stock
$5.99 each Order | Details | Related Items |
|
|
| Trim Channel - Side 17-Inch (Bally/Williams)
Part #: 03-8228-3
Condition: New
Black plastic backglass side Trim - 17 inches long. Fits 1/8-inch thick backglasses in some late-1980s Williams games with... more
In Stock
$5.99 each Order | Details | Related Items |
|
| Trim set - 3-piece - backglass top & sides - for 1/8-inch thick backglass
Part #: 03-8228-SETD
Condition: New
Black plastic. Includes two (2) side pieces 17-1/4 inches each, and one (1) top piece 27 inches. Fits 1/8-inch thick... more
In Stock
$23.07 set Order | Details | Related Items |
|
| Lift trim - backglass - 27-inch black plastic - for 1/8-inch thick backglass
Part #: 03-8229-1
Condition: New
27-inches (26-7/8-inch actual length). Black molded plastic. Used on 1/8-inch thick backglasses. Backglass bottom lift trim- or... more
In Stock
$9.49 each Order | Details | Related Items |
|
|
| Lift trim - backglass - 30-inch black plastic - for 1/8-inch thick backglass
Part #: 03-8229-30
Condition: New
30-inch length. Black molded plastic. Used on 1/8-inch thick backglasses. Backglass bottom lift trim- or lift channel- as used... more
Out of Stock - Discontinued more info...
$14.95 each Details | Related Items |
|
| Trim - speaker/display panel - H channel
Part #: 03-8265-1
Condition: New
For use on Bally & Williams games, approx. 1987-1994. This 'H' shaped plastic channel mounts on top of the speaker/display... more
In Stock
$12.59 each Order | Details | Related Items |
|
|
| Insulator (Bally/Williams)
Part #: 03-8523
Condition: New
Insulator used on later-model Bally and Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
|
| Grille - Plastic - Cabinet Speaker 7 x 7 Inches (Bally/Williams)
Part #: 03-8603-1
Condition: New
Black plastic grille for speaker opening in main cabinet. Used on Bally and Williams games from approx. 1991 through 1999 (see... more
Out of Stock
$8.33 each Details | Related Items |
|
|
| Ball Shooter Internal Spring (Standard Strength)
Part #: 10-148-4
Condition: New
Standard strength plunger spring for most games. 0.033-inch diameter wire. Replacement for green colored spring, Bally part #... more
In Stock
$0.95 each Order | Details | Related Items |
|
| Ball Shooter External Barrel Spring - 7/8 Inch
Part #: 10-149
Condition: New
7/8-inch overall length spring used on outer side of ball shooter / plunger. Common spring for most makes/models (for Data East... more
In Stock
$0.69 each Order | Details | Related Items |
|
| Decal - 4-Button Service Switch Panel (Bally/Williams)
Part #: 16-9166
Condition: New
Decal used for service buttons inside coin door on many later-model Bally and Williams games. Fits 4-button panel, as used in... more
In Stock
$2.50 each Order | Details | Related Items |
|
| Ball Shooter Rod With Black Knob (Bally / Williams)
Part #: 20-9253-7
Condition: New
Standard replacement ball shooter rod for most makes/models of pinball games. Replaces Bally/Williams part #20-9253-7, Capcom #... more
In Stock
$9.79 each Order | Details | Related Items |
|
| Latch - backbox
Part #: 20-9347
Condition: New
Brand new latch mechanism for backbox, as used on Bally & Williams games approx. 1988 up. Can be installed on other... more
In Stock
$6.99 each Order | Details | Related Items |
|
| Latch - backbox (USED)
Part #: 20-9347U
Condition: Used
Used latch mechanism for backbox, as used on Bally & Williams games approx. 1988 up. Can be installed on other makes/models and... more
Out of Stock
$3.50 each Details | Related Items |
|
| Standoff Clip (Bally/Williams)
Part #: 20-9534
Condition: New
Metal standoff clip used for mounting circuit boards in backbox in later-model Bally and Williams games. 1/2-inch height.
Temporarily out. Please check back. more info...
$2.49 each Details | Related Items |
|
| Cabinet Start Button Assembly - Yellow Lens
Part #: 20-9663-1
Condition: New
Illuminated start button assembly for cabinet front. Commonly used on later-model Bally and Williams games, possible others.... more
In Stock
$11.99 each Order | Details | Related Items |
|
| Cabinet Extra Ball Button Assembly - Yellow Lens
Part #: 20-9663-9
Condition: New
Illuminated extra ball button assembly for cabinet front. Commonly used on some later-model Bally and Williams games with extra... more
In Stock
$11.35 each Order | Details | Related Items |
|
| Cabinet Extra Ball Button Assembly - Yellow Lens (USED)
Part #: 20-9663-9U
Condition: Used
Used illuminated extra ball button assembly for cabinet front. Original-style housing which uses press-in lamp/switch holder... more
Out of Stock
$5.00 each Details | Related Items |
|
| Ball Shooter Housing - Chrome
Part #: 21-6645-1
Condition: New
New chrome metal ball shooter housing. Replacement for Williams games mid 1960s through 1999, and Bally games approx.... more
In Stock
$16.79 each Order | Details | Related Items |
|
| Coin Chute Entry Plate - 5-Cent / Token - Amber
Part #: 27-1026-1
Condition: New
Plastic coin chute entry Plate - as used on many Bally & Williams games from late 1980s and up. Transparent amber molded... more
In Stock
$7.50 each Order | Details | Related Items |
|
|
| Coin Chute Entry Plate - 25-Cent 0.083 Inch Wide - Amber
Part #: 27-1026-3
Condition: New
Plastic coin chute entry Plate - as used on many Bally & Williams games from late 1980s and up. Transparent amber molded... more
In Stock
$8.99 each Order | Details | Related Items |
|
|
| Coin Chute Entry Plate - 25-Cent 0.12 Inch Wide - Amber
Part #: 27-1026-11
Condition: New
Plastic coin chute entry Plate - as used on many Bally & Williams games from late 1980s and up. Transparent amber molded... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
|
| Coin Chute Entry Plate - 25-Cent 0.15 Inch Wide - Amber
Part #: 27-1026-13
Condition: New
Plastic coin chute entry Plate - as used on many Bally & Williams games from late 1980s and up. Transparent amber molded... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Reject Button
Part #: 27-1037
Condition: New
Amber plastic coin reject button for use on select coin doors used on many Bally & Williams games, late 1980s and up. Works... more
In Stock
$2.50 each Order | Details | Related Items |
|
| Coin Reject Button Cover
Part #: 27-1038
Condition: New
Amber plastic coin reject button cover/lens for use on select coin doors used on many Bally & Williams games, late 1980s and... more
In Stock
$1.75 each Order | Details | Related Items |
|
| Coin Switch Actuator Wireform - 25-cent Quarters (Bally/Williams)
Part #: 27-1075
Condition: New
Wireform actuator for coin microswitch. Used on 2- and 3-slot Entropy brand coin doors that shipped with many later-model Bally... more
In Stock
$2.25 each Order | Details | Related Items |
|
| Coin Reject Armature
Part #: 27-1082
Condition: New
Black plastic coin reject armature as used on many later-model Bally/Williams games that used the Entropy brand coin door. This... more
In Stock
$3.95 each Order | Details | Related Items |
|
| Retainer - Coin Mechanism
Part #: 27-1083
Condition: New
Black plastic coin mechanism retainer. Mounts to coin slot and hinges down to hold top of coin mechanism. Used in some... more
In Stock
$11.20 each Order | Details | Related Items |
|
| Coin Trip Wireform (Williams)
Part #: 27-1093
Condition: New
Pre-bent coin switch trip wire used on some Williams and possibly late-model Bally games. Measures 1-7/8-inch overall length.... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Test/Service Switch - Momentary Contact (Bally/Williams)
Part #: 5641-09312-00
Condition: New
Replacement test/service switch for use in many Bally and Williams games. Used in switch assembly #s... more
Out of Stock
$5.49 each Details | Related Items |
|
| Service Button Assembly - 4 Buttons - Momentary Contact (Bally/Williams)
Part #: 5641-12724-00
Condition: New
Coin door service button assembly with 4 momentary-contact pushbutton switches. As used on most Bally & Williams games from... more
In Stock
$15.35 each Order | Details | Related Items |
|
| Coil Plunger - Knocker / Chime / Bell - 2-1/2-Inch (Williams)
Part #: A-5387
Condition: New
Coil plunger for replay knocker and scoring chimes/bells, as used in many Williams games, old and new. Measures 2-1/2-inches... more
In Stock
$5.59 each Order | Details | Related Items |
|
|
| Side Molding Assembly - Stainless Steel (Bally/Williams)
Part #: A-12359-3
Condition: New
Cabinet side molding, stainless steel. 2 used per machine. Fits on top side edge of main cabinet and holds glass channel in... more
Out of Stock
Details | Related Items |
|
| Backbox Lock & Plate Assy (Bally/Williams)
Part #: A-13379
Condition: New
Backbox lock and plate assembly as used on later-model Bally and Williams games. Includes 1 silver/chrome key, single-bitted.... more
In Stock
$11.28 each Order | Details | Related Items |
|
| Extra Ball Button Assembly - Yellow (Bally/Williams)
Part #: A-15896-2
Condition: New
Extra ball button assembly with yellow lens, button housing, lamp socket, lamp, switch, and wiring harness with connector.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Lockdown Bar - WPC Widebody Games 25-inch
Part #: A-17996
Condition: New
Lockdown bar for late-model Bally and Williams widebody pinball games. Fits games listed below. Brushed stainless steel finish.... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Replay Knocker Assembly - Vertical Mount - AE-23-800 Coil
Part #: B-10686-1
Condition: New
Replay knocker assembly for many later-model Bally and Williams games. Can also be used in other makes/models that supply coil... more
In Stock
$39.65 each Order | Details | Related Items |
|
| Replay Knocker Assembly - Vertical Mount - AE-23-800 Coil w/ Connector
Part #: B-10686-1A
Condition: New
Replay knocker assembly with wiring & connector for many later-model Bally and Williams games. Can also be used in other... more
In Stock
$45.93 each Order | Details | Related Items |
|
| 25-cent (US/Canada) Coin Mechanism - Metal
Part #: COINMECH25
Condition: New
SEE FITMENT NOTES BELOW BEFORE ORDERING. 25-cent coin mechanism designed for use with U.S.... more
In Stock
$18.99 each Order | Details | Related Items |
|
| 25-cent (US/Canada) Coin Mechanism - Composite
Part #: COINMECH25A
Condition: New
SEE FITMENT NOTES BELOW BEFORE ORDERING. 25-cent coin mechanism designed for use with U.S.... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Lockdown Bar Foam Strip - Bally/Williams WPC Widebody Games (1993-1994)
Part #: FOAMLB_WB
Condition: New
Self-adhesive foam strip that mounts on bottom side of front lockdown bar between bar and playfield glass. 24-inch width for... more
In Stock
$4.56 each Order | Details | Related Items |
|
| Heavy-Duty 3-Inch Leg Leveler with Nut
Part #: LEV3HD
Condition: New
3-inch tall swivel base leg leveler with nut. 3/8-16 threads. Commercial quality. These are the same ones Stern Pinball use on... more
In Stock
$2.49 each Order | Details | Related Items |
|
| Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike - Fort/Hawk Style (SEE NOTE)
Part #: LOCKDB78
Condition: New
Fort brand style lock for use on most games for coin door and backbox. Keyed alike- key is same from lock to lock (see note... more
In Stock
$7.95 each Order | Details | Related Items |
|
| Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
Part #: LOCKDB78A
Condition: New
Standard size lock as used on most games for coin door and backbox. 7/8-inch length barrel (threaded portion of lock). Comes... more
In Stock
$4.95 each Order | Details | Related Items |
|
| Keyless Lock - 7/8 Inch
Part #: LOCKHM78
Condition: New
Keyless lock for use on most makes/models of games where security is not required. Has turn tab to operate lock instead of... more
In Stock
$5.95 each Order | Details | Related Items |
|
| Decal - High Voltage - Lockdown Bar Latch (Bally / Williams)
Part #: PDG355
Condition: New
This nice looking warning decal mounts on the latch under the front glass lockdown bar on Bally and Williams games, approx.... more
In Stock
$4.95 each Order | Details | Related Items |
|
| Tape - Side-Rail Mounting (For 1 Rail) (Bally/Williams)
Part #: RAILTAPE
Condition: New
39-inch (1 meter) roll of double-sided adhesive foam tape used for mounting metal side-rail to cabinet on Bally/Williams games... more
Out of Stock
$3.50 roll Details | Related Items |
|
|
| Tubing - #10 x 0.106 ID (Bally/Williams)
Part #: RM-21-03
Condition: New
Tubing used for various mechanisms on some later-model Bally/Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Backbox Latch & Plate Set (USED)
Part #: U452
Condition: Used
Spring-loaded latch and latch plate for back of game- holds backbox in upright position. Used on later-model Bally and Williams... more
Out of Stock
$5.00 set Details | Related Items |
|
| Ball Shooter Housing 21-6645-1 - Chrome - No Logo (USED)
Part #: U942
Condition: Used - Very Good
Used chrome metal ball shooter housing for Williams games mid 1960s through 1999, and Bally games approx. 1987-1999.... more
In Stock
$15.00 each Order | Details | Related Items |
|
| Ball Shooter Housing 21-6645-1 - Chrome - With Logo (USED)
Part #: U943
Condition: Used - Good
Used chrome metal ball shooter housing for Williams games mid 1960s through 1999, and Bally games approx. 1987-1999.... more
In Stock
$12.50 each Order | Details | Related Items |
|
|
| Mounting Plate 01-3535 - Ball Shooter Housing (Bally/Williams) (USED)
Part #: U944
Condition: Used - Good
Used metal mounting plate for Williams games with manual ball shooter, mid 1960s to 1999, and Bally games late 1980s to 1999.... more
In Stock
$3.50 each Order | Details | Related Items |
|
|
| Ball Shooter Internal Spring 10-148-4 (Standard Strength) (USED)
Part #: U1100
Condition: Used - Excellent
Used standard strength plunger spring for most games. Replaces Bally # SP-200-24, Data East # 266-5001-04, and Bally/Williams... more
In Stock
$0.50 each Order | Details | Related Items |
|
| Service Button Assembly - 4 Buttons (Bally/Williams) (USED - FOR REPAIR/PARTS)
Part #: U1111
Condition: Used - Fair
Used coin door service button assembly with 4 momentary-contact pushbutton switches. One end button sticks and may need... more
In Stock
$10.00 each Order | Details | Related Items |
|
| Ball Shooter Rod 20-9253-7 With Black Knob (Bally / Williams) (USED)
Part #: U1123
Condition: Used - Good
Used ball shooter rod with black plastic knob. Factory part # 20-9253-7. Replaces Bally/Williams part #20-9253-7, Capcom #... more
In Stock
$3.50 each Order | Details | Related Items |
|
|
| Retainer 27-1083 - Coin Mechanism (USED)
Part #: U1140
Condition: Used - Good
Used black plastic coin mechanism retainer. Mounts to coin slot and hinges down to hold top of coin mechanism. Used in some... more
In Stock
$9.00 each Order | Details | Related Items |
|
| Coil Plunger A-5387 - Knocker / Chime / Bell - 2-1/2-Inch (Williams) (USED)
Part #: U1143
Condition: Used - Very Good
Used coil plunger with nylon tip for replay knocker and scoring chimes/bells, as used in many Williams games, old and new.... more
In Stock
$4.50 each Order | Details | Related Items |
|
| Coin Box 03-7626 - White Plastic (Bally/Williams) (USED)
Part #: U1263
Condition: Used - Good
Used white plastic coin box for later-model Bally and Williams games, approx. 1990 and up. Original factory part # 03-7626.... more
In Stock
$12.50 each Order | Details | Related Items |
|
|
| Metal Grille / Vent 01-6645 - Backbox Upper Rear (Williams)
Part #: U1273
Condition: Used - Good
Used perforated sheet metal grille / vent / screen used at top of backbox rear for ventilation in many Bally and Williams games... more
In Stock
$15.00 each Order | Details | Related Items |
|
| Lockdown Bar Latch / Lever Assembly A-16773 (Bally/Williams) (USED)
Part #: U1291
Condition: Used - Good
Used lockdown bar latch assembly for some Bally and Williams games (see game listing below). Factory part # A-16773. Also... more
In Stock
$75.00 each Order | Details | Related Items |
|
| Plunger - Illuminated Pushbutton
Part #: X6050
Condition: New
White plastic plunger for illuminated pushbutton housing. Holds lens on front, and slides into round black button housing from... more
In Stock
$2.50 each Order | Details | Related Items |
|
Pinball Parts
