Coin Entry Plate - Nickel (Williams) (USED)
Part # 01-4215-NU
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
|
|
Coin Entry Plate - Dime (Williams) (USED)
Part # 01-4215-DU
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
|
|
Metal Grille / Vent - Backbox Neck (Williams)
Part # 01-6584
Condition: New
Perforated sheet metal grille / vent / screen at top of main cabinet for ventilation into neck / backbox. Factory part #... more
|
|
Bracket - CPU Mounting - Upper (Williams) (USED)
Part # 01-6639U
Condition: Used
Used bracket for top of MPU board mounting in backbox. 10-1/2 inches overall length, 10 inches between PC board mounting... more
|
|
Bracket - Backbox Insert Stop (Williams) (USED)
Part # 01-6664U
Condition: Used
Used metal stop bracket for backbox insert panel in early Williams electronic solid-state (SS) games approx. 1977-1984. ... more
|
|
Playfield Pivot Sleeve Nut - 1/2-Inch (USED)
Part # 02-4329U
Condition: Used
Used threaded sleeve nut that mounts on inside of main cabinet wall and acts as a pivot or slide pin for the playfield.... more
|
|
Channel - Playfield Glass Top - Widebody Width 23 Inch (Bally / Williams) (USED)
Part # 03-8091-2U
Condition: Used
Used black plastic trim channel that sits at the top (back end) of the playfield glass. Fits wide-body (Superpin) late-model... more
|
|
Price Plate (Williams) Dime 1 Play - Yellow/Black (USED)
Part # 16C-8640-5U
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of... more
|
|
Theatre of Magic (Bally) Backglass Translite (USED)
Part # 31-1357-50039
Condition: Used
Never installed/used in a machine, but we are calling it used because it has been displayed on a wall since it was brand new... more
|
|
Indiana Jones (Williams) Display / Speaker Panel Cover (USED) (SEE NOTE)
Part # 31-1420-50017U
Condition: Used - Good
Used plastic speaker / display cover plastic with silkscreened artwork for Williams Indiana Jones pinball. ... more
|
|
Coin Mech Locking Plate - Silver Color (Coin Controls / Wells Gardner) (USED)
Part # 92-1002-10-UA
Condition: Used - Excellent
Used vertical metal bracket that holds coin mechanism in place on Coin Controls / Wells Gardner brand coin doors which were... more
|
|
Coin Mech Locking Plate - Brass Color (Coin Controls / Wells Gardner) (USED)
Part # 92-1002-10-UB
Condition: Used - Excellent
Used vertical metal bracket that holds coin mechanism in place on Coin Controls / Wells Gardner brand coin doors which were... more
|
|
Coin Door Price Plate - Black/Red 10C 1 PLAY (Chicago Coin / Stern)
Part # 326-305-B
Condition: Used
Used coin door price plate for many Chicago Coin and older Stern games 1985 and earlier. 10c / 1 PLAY in red lettering with... more
|
|
Coin Door Price Plate - Black/Red 25C 3 PLAYS (Chicago Coin / Stern)
Part # 326-305-C
Condition: New
Coin door price plate for many Chicago Coin and older Stern games 1985 and earlier. 25c / 3 PLAYS in red lettering with black... more
|
|
Hinge - Coin Drop Casting (Bally)
Part # A-254-11
Condition: New
Hinge for coin bezel (casting) on front of coin door on older Bally games from approx. 1972-1984. This hinge mounts at... more
|
|
Top Hinge Assembly - Backbox Insert (Williams) (USED)
Part # A-7984U
Condition: Used
Used backbox insert panel top hinge assembly. Acts as a support/hinge bracket for holding top of backbox insert panel in early... more
|
|
Bottom Hinge Assembly - Backbox Insert (Williams) (USED)
Part # A-7985U
Condition: Used
Used backbox insert panel lower hinge assembly. Acts as a support bracket for holding backbox insert panel in early Williams... more
|
|
Coin Entry Plate - 2 Nickels 1 Play (Gottlieb) (USED)
Part # A-10724U
Condition: Used
Used white plastic coin entry plate, red printing on black background. 2 NICKELS 1 PLAY. For use on vintage Gottlieb games.... more
|
|
Coin Entry Plate - Dime 1 Play (Gottlieb) (USED)
Part # A-10725U
Condition: Used
Used white plastic coin entry plate, red printing on black background. 10c 1 PLAY. For use on vintage Gottlieb games. Factory... more
|
|
Flipper Button Mounting Bracket (Gottlieb) (USED)
Part # A-13898U
Condition: New
Used metal plate for mounting flipper button housing # C-13900 to inside of cabinet wall in... more
|
|
Flipper Button - Yellow (Bally/Williams) (USED)
Part # A-16883-6U
Condition: Used
Used yellow plastic pushbutton with threaded housing. Standard size button measuring 15/16-inches deep, 5/8-inch thread length.... more
|
|
Score Reel Assembly 3-Inch Yellow (Bally) (USED)
Part # AS-1900-XXX-1U
Condition: Used
Used score reel assembly with 3-inch yellow plastic reel with black numbers for most Bally games from late 1964 through late... more
|
|
Score Reel Assembly 3-Inch Yellow (Bally) (USED)
Part # AS-1900-XXX-2U
Condition: Used
Used score reel assembly with 3-inch yellow plastic reel with black numbers for most Bally games from late 1964 through late... more
|
|
Score Reel Assembly 3-Inch Yellow (Bally) (USED)
Part # AS-1900-XXX-3U
Condition: Used
Used score reel assembly with 3-inch yellow plastic reel with black numbers (reel is broken and chipped). For most Bally... more
|
|
Price Plate (Bally) Clear / Spacer (USED)
Part # C-826-CLEAR-U
Condition: Used
Used clear plastic price plate / spacer for coin slot entry on older Bally pinball games from early 1970s through early... more
|
|
Price Plate (Bally) 2 Plays Quarter - Yellow/Black (USED)
Part # C-826-50U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 Play Quarter - Yellow/Black (USED)
Part # C-826-57U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 Play 1 Quarter 3 Plays 2 Quarters - Yellow/Black (USED)
Part # C-826-61U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 Dollar 4 Plays - Yellow/Black (USED)
Part # C-826-110U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 Dollar 5 Plays - Yellow/Black (USED)
Part # C-826-111U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 Dollar 6 Plays - Yellow/Black (USED)
Part # C-826-112U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 Dollar 7 Plays - Yellow/Black (USED)
Part # C-826-113U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 SBA Dollar 4 Plays - Green/Black (USED)
Part # C-826-119U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 SBA Dollar 5 Plays - Green/Black (USED)
Part # C-826-120U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 SBA Dollar 6 Plays - Green/Black (USED)
Part # C-826-121U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 SBA Dollar 7 Plays - Green/Black (USED)
Part # C-826-122U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 SBA Dollar 3 Plays - Green/Black (USED)
Part # C-826-123U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 2 Quarters 1 Play / 4 Quarters 3 Plays - Yellow/Black (USED)
Part # C-826-152U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 2/3/4 x 25 Cent = 1/2/3 Plays - Yellow and Green /Black (USED)
Part # C-826-162U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 2/4 x 25 Cent = 1/5 Plays - Yellow and Green /Black (USED)
Part # C-826-163U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1/2/3/4 x 25 Cent = 1/3/4/7 Plays - Yellow and Green /Black (USED)
Part # C-826-164U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1/2/3/4 x 25 Cent = 1/3/5/7 Plays - Yellow and Green /Black (USED)
Part # C-826-165U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Price Plate (Bally) 1 Token 1 Play - Red/Black
Part # C-826-184
Condition: New
Price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s.
|
|
Price Plate (Bally) 2/3/4 x 25 Cent = 1/2/3 Plays - Yellow/Black (USED)
Part # C-826-215U
Condition: Used
Used price plate for coin slot entry on older Bally pinball games from early 1970s through early 1980s. Used part in... more
|
|
Coin Entry Plate - Dime (Gottlieb) (USED)
Part # C-16566-10U
Condition: Used
Used white plastic coin entry plate with red cellophane/Mylar overlay for color. Black printing with 10c 1 PLAY. For use on... more
|
|
Coin Entry Plate - Quarter 2 Plays (Gottlieb) (USED)
Part # C-16566-25-2U
Condition: Used
Used white plastic coin entry plate with red cellophane/Mylar overlay for color. Black printing with 25c 2 PLAYS. For use on... more
|
|
Button Assembly - White (Bally / Stern) (USED)
Part # C-904905U
Condition: Used
Used white flipper pushbutton and housing for Bally or Stern late electro-mechanical (EM) and early electronic solid-state (SS)... more
|
|
Glass - Playfield and Backbox - New and Used
Part # GLASS_CAB
Condition: New
Tempered safety glass in a variety of sizes for different makes/models.
|
|
Blank / Filler Plate - Coin Slot (Bally) (USED)
Part # P-582U
Condition: Used - Good
Used stainless steel coin slot block-off, or filler plate. Installed when a particular coin slot is not wanted on the game.... more
|
|
Bracket - Cash Box (Bally) (USED)
Part # P-3045-9U
Condition: Used
Used metal bracket for coin box locking/securing. Mounts on right front side of coin box area inside coin door. Used on many... more
|
|
Bracket - Backbox Lock Mounting (Bally) (USED)
Part # P-3473-18U
Condition: Used
Bracket used for mounting / reinforcing the backbox lock in Bally electronic solid-state (SS) games. Used part in good... more
|
|
Bally Leg Bolt Protector Plate (Armor) (USED)
Part # P-3914U
Condition: Used
Metal plate, or armor, that covers the leg bolts and leg bolt mounting plate on the inside of the cabinet. As used on Bally... more
|
|
Coin Door Trim / Molding - Right (Bally) (USED)
Part # P-5940-31U
Condition: Used - Fair
Used stainless steel right side (lock side) molding / trim piece for coin door opening on older Bally games from early 1970s... more
|
|
Coin Rejector Arm P-7600 (Bally) (USED)
Part # U5
Condition: Used - Good
Used metal coin rejector arm used inside coin door on older Bally games from approx. 1972-1984. Bally part # P-7600. ... more
|
|
Coil Slide Assembly A-3051-111 (Bally) (USED)
Part # U6
Condition: Used - Good
Used coin chute assembly for older Bally games from approx. 1972-1984. Bally part # A-3051-111. Used part in good... more
|
|
Coin Rejector Mounting Bracket P-7713 (Bally) (USED)
Part # U9
Condition: Used - Good
Used metal mounting bracket for coin rejector for older Bally games from approx. 1972-1984. Bally part # P-7713. Used... more
|
|
Coin Rejector Lever and Pivot Assembly AS-2487 (Bally) (USED)
Part # U10
Condition: Used - Good
Used coin rejector lever/pivot assembly with bracket for older Bally games from approx. 1972-1984. Bally part # AS-2487. ... more
|
|
Coin Lock Out Strip P-7327-1 - 8-9/16 Inch (Bally) (USED)
Part # U14
Condition: Used - Good
Used metal actuator for coin lock-out mechansim on older Bally games from approx. 1972-1984. Bally part # P-7327-1. ... more
|
|
Coin Rejector Mount A-1388-48 (Bally) (USED) (SEE NOTE)
Part # U15
Condition: Used - Fair
Used mounting frame for coin mechanism on older Bally games from approx. 1972-1984. Bally part # A-1388-48. Has some... more
|
|
Coin Drop Casting C-827 (Bally) (USED)
Part # U16
Condition: Used - Good
Used metal coin return tray (casting) for older Bally games from approx. 1972-1984. Bally part # C-827. Used part in... more
|
|
Coin Slot Cover P-6688-31 (Bally) (USED)
Part # U17
Condition: Used - Good
Used metal cover for unused coin return slot on older Bally games from approx. 1972-1984. Bally part # P-6688-31. Used... more
|
|
Coin Window and Plate Bracket P-7496 (Bally) (USED)
Part # U19
Condition: Used - Good
Used metal bracket which holds coin price plate (window) and metal coin slot/plate in place on coin door on older Bally games... more
|
|
Coin Rejector Mount A-1388-48 (Bally) (USED)
Part # U20
Condition: Used - Fair
Used mounting frame for coin mechanism on older Bally games from approx. 1972-1984. Bally part # A-1388-48. Has some... more
|
|
Coin Rejector Mount A-1388-48 (Bally) (USED)
Part # U21
Condition: Used - Good
Used mounting frame for coin mechanism on older Bally games from approx. 1972-1984. Bally part # A-1388-48. Missing many... more
|
|
Lock Spacer Bracket P-6264-86 (Bally) (USED)
Part # U23
Condition: Used - Very Good
Used metal coin door lock bracket that mounts on back side of coin door back plate and serves as... more
|
|
Game Lock With Keys - 1-1/8 Inch (Long) - Double-Bitted (USED)
Part # U26
Condition: Used - Excellent
Used long 1-1/8-inch barrel lock for backboxes on most solid-state (electronic) Bally and Stern pinball games 1977-1985 (see... more
|
|
Coin Lockout Armature (Bally) (USED) (SEE NOTE)
Part # U27
Condition: Used - Good
Used metal armature for coin lockout coil assembly for many older electronic solid-state (SS) Bally games from approx.... more
|
|
Coin Switch Fish Paper Insulator (Bally) (USED)
Part # U28
Condition: Used - Good
Used fish paper insulator for coin switch for many older Bally games from approx. 1971-1978. Uncertain of factory part... more
|
|
Bracket P-8162 - Coin Door Test Button (Bally) (USED)
Part # U29
Condition: Used - Good
Used metal mounting bracket for diagnostic test button on many older electronic solid-state (SS) Bally games from approx.... more
|
|
Coin Lockout Wire Bracket P-6629-49 (Bally) (USED)
Part # U31
Condition: Used - Good
Used metal mounting bracket for brass coin lockout wireform used in coin rejector mounting... more
|
|
Data East Flipper Button Microswitch and Bracket Assembly (USED)
Part # U32
Condition: Used
Complete flipper switch assembly with microswitch, actuator blade, and mounting bracket, as used on some Data East pinball... more
|
|
Coin Guide Bracket P-6694 (Bally) (USED)
Part # U34
Condition: Used - Good
Used metal coin guide bracket for Bally games approx. 1971-1984. Used part in good condition showing some signs of age... more
|
|
Coin Return Pivot Lever Assembly AS-2488 (Bally) (USED)
Part # U35
Condition: Used - Good
Used pivot lever assembly used on one end of coin rejector arm on Bally games approx. 1971-1984. Used part in good... more
|
|
Coin Return Pivot Lever Assembly AS-2488 w/o Pin (Bally) (USED)
Part # U36
Condition: Used - Good
Used pivot lever bracket used on one end of coin rejector arm on Bally games approx. 1971-1984. Missing pin and both... more
|
|
Replay Knocker Assembly AS-731-9 (Bally) (USED)
Part # U40
Condition: Used
Used replay knocker assembly from older Bally electro-mechanical (EM) pinball game. Used on most Bally games from mid 1970s and... more
|
|
Coin Guide Spacer - P-6431-X (Dollars) (Bally) (USED)
Part # U43
Condition: Used - Good
Used metal coin guide spacer for US dollar coins. Used on Bally games approx. 1979-1982. Used part in good condition... more
|
|
Coin Guide - P-6695 (Bally) (USED)
Part # U44
Condition: Used - Good
Used metal coin guide bracket for Bally games approx. 1971-1984. Used part in good condition showing some signs of age... more
|
|
Flipper Button Mounting Bracket (Bally/Stern) (USED)
Part # U54
Condition: Used
Used metal bracket that mounts to back (inside) of flipper button housing and screws to cabinet wall to hold flipper button and... more
|
|
Playfield Top Edge Protector Bar (USED)
Part # U55
Condition: Used
Metal bar that mounts on cabinet at rear (top end) of playfield. Protects cabinet and playfield from wear when playfield is... more
|
|
Backglass Locking Tab 01-6581 (Williams) (USED)
Part # U56
Condition: Used
Metal tab that screws to backglass locking latch bar and holds backglass in place when locked. Factory part # 01-6581. Used in... more
|
|
Motor Board Prop Rod Support Bracket (Bally) (USED)
Part # U60
Condition: Used
Bracket that holds motor panel support rod in older Bally electro-mechanical (EM) pinballs 1960s through early 1970s. Used part... more
|
|
Pushbutton Assembly - Illuminated (USED)
Part # U88
Condition: Used
Pushbutton and housing assembly- as used on many later makes/models. Includes mounting nut. Button can be illuminated (combo... more
|
|
Stern Leg Bolt Protector Plate (Armor) (USED)
Part # U161
Condition: Used
Metal plate, or "armor" that covers the leg bolts and leg bolt mounting plate on the inside of the cabinet. As used... more
|
|
Coil Plunger w/ Notch - 2-1/8 Inch (USED)
Part # U235
Condition: Used
Used coil plunger with side-notch. Measures 2-1/8 inches in length, 7/16 inch diameter. Notch is 1/4 inch in length. Used part... more
|
|
Doctor Who (Bally) Dalek Red Domes (2) (USED)
Part # U256
Condition: Used
Set of two used red plastic domes for Bally Doctor Who pinball. These two domes go on the top of the Dalek on the backbox. Sold... more
|
|
Flipper Button and Housing - White (Bally/Stern) (USED)
Part # U380
Condition: Used
White flipper button & housing, as used on many Bally & Stern pinball games from mid 1970s through mid 1980s. Used part, sold... more
|
|
Flipper button - White - Short (USED)
Part # U381
Condition: Used
Short flipper button as used on many makes and models. Housing overall length is 1-1/8 inch. Threaded portion of housing is 5/8... more
|
|
Antique Leg Leveler Set (Williams) (USED)
Part # U423
Condition: Used
Original set of 4 leg levelers and adjusting nuts from an early 1950s Williams pitch-and-bat baseball pinball game. Some light... more
|
|
2-Inch Leg Leveler with Nut (USED)
Part # U442
Condition: Used
Used 2-inch swivel leg leveler with nut (nut not pictured). Lightly used, excellent... more
|
|
Coin Door Security Bar and Bracket Set (3pcs) 15-1/2 Inch (Bally/Williams) (USED)
Part # U454
Condition: Used
Used factory-original coin door security bar and mounting bracket set, as shipped with some late-model Bally and Williams... more
|
|
Bracket Set - Backglass - EM Games (Bally) (USED)
Part # U456
Condition: Used - Excellent
Set of 2 latches that mount on inside upper edge of backbox interior in later-model Bally EM (electro-mechanical) games. Sold... more
|
|
Coin Door Security Bar / Hasp Assembly (USED)
Part # U458
Condition: Used
Great for commercial operators! Coin door security bar/hasp assembly. Fits most makes/models. Includes bracket that bolts... more
|
|
Coin Mechanism - Multi- Coin (USED)
Part # U460
Condition: Used
Used multi-coin coin mechanism / rejector / acceptor. Takes U.S. quarters, dimes, nickels. Large mechanism- likely from a juke... more
|
|
Coin Lockout Coil Armature - SS Games (Bally) (USED)
Part # U477
Condition: Used
Used armature bracket for coin door lockout coil mechanism used on many early Bally electronic solid-state (SS) games approx.... more
|
|
Price Plate - 25 Cents - Red/Black (Midway) (USED)
Part # U481
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
|
|
Price Plate (Bally) Dime - Green/Black (USED)
Part # U482
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
|
|
Price Plate (Bally) Nickel - Red/Black (USED)
Part # U483
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
|
|
Cam Lock - 5/8-Inch w/ Keys (USED)
Part # U525
Condition: Used
Used 5/8-inch barrel cam lock with 2 keys. Excellent condition.
|
|
25-cent (US) Coin Mechanism - Coin Controls (USED) (SEE NOTES)
Part # U529
Condition: Used
Used Coin Controls brand coin mechanism. Accepts US quarters. Can be used in virtually any coin-operated game that uses US... more
|
|
25-cent (US) Coin Mechanism - Coin Mech Inc (USED - MISSING PARTS - FOR PARTS/REPAIR)
Part # U532
Condition: Used
Used Coin Mech Inc brand coin mechanism. Accepts US quarters. Missing cradle arm, reject lever torsion spring, and mounting... more
|
|
Pinball Parts
