Cabinet Parts

	Insert Latch (Bally / Data East / Stern) Part #: P-372-6 Condition: New New aftermarket replacement metal latch for backbox insert panel on early Bally and Stern electronic solid-state (SS) pinball... more In Stock $4.99 each     Order | Details | Related Items
	Bally Leg Bolt Protector Plate (Armor) (USED) Part #: P-3914U Condition: Used Metal plate, or armor, that covers the leg bolts and leg bolt mounting plate on the inside of the cabinet. As used on Bally... more Out of Stock $1.50 each     Details | Related Items
	Plate - Ball Shooter Mounting (Bally) Part #: P-5291 Condition: New Metal ball shooter mounting plate used on some older Bally pinball games. Non-stocked, special-order item. $8.89 each     Details | Related Items
	Blank / Filler Plate - Coin Slot (Bally) Part #: P-582 Condition: New Stainless steel coin slot block-off, or filler plate. Installed when a particular coin slot is not wanted on the game. Requires... more Non-stocked, special-order item. $5.09 each     Details | Related Items
	Blank / Filler Plate - Coin Slot (Bally) (USED) Part #: P-582U Condition: Used - Good Used stainless steel coin slot block-off, or filler plate. Installed when a particular coin slot is not wanted on the game.... more In Stock $4.00 each     Order | Details | Related Items
	Coin Door Trim / Molding - Left (Bally) Part #: P-5940-29 Condition: New No longer available individually- order as full set part # P-5940-29-31. ... more Out of Stock Details | Related Items
	Coin Door Trim / Molding Set 4pcs (Bally) (SEE NOTE) Part #: P-5940-29-31 Condition: New 4-piece set of stainless steel molding / trim pieces for coin door opening on older Bally games from early 1970s through early... more Out of Stock $63.79 set     Details | Related Items
	Coin Door Trim / Molding - Left (Bally) (USED) Part #: P-5940-29U Condition: Used - Very Good Used stainless steel left side (hinge side) molding / trim piece for coin door opening on older Bally games from early 1970s... more In Stock $12.50 each     Order | Details | Related Items
	Coin Door Trim / Molding - Top and Bottom (Bally) Part #: P-5940-30 Condition: New No longer available individually- order as full set part # P-5940-29-31. ... more Out of Stock Details | Related Items
	Coin Door Trim / Molding - Right (Bally) Part #: P-5940-31 Condition: New No longer available individually- order as full set part # P-5940-29-31. ... more Out of Stock Details | Related Items
	Coin Door Trim / Molding - Right (Bally) (USED) Part #: P-5940-31U Condition: Used - Fair Used stainless steel right side (lock side) molding / trim piece for coin door opening on older Bally games from early 1970s... more In Stock $10.00 each     Order | Details | Related Items
	Coin Door Trim / Molding Hardware Set 42pcs (Bally) (SEE NOTES) Part #: P-5940-HW Condition: New 42-piece set of stainless steel hardware for mounting coin door and cabinet side rail trim pieces on older Bally games from... more In Stock $18.89 set     Order | Details | Related Items
	Coin Switch Cover - Early (Bally) Part #: P-6297-1 Condition: New Metal cover for coin switch on older Bally games from approx. 1972-1978. Can also be used in place of later style cover #... more Out of Stock - Discontinued   more info... Details | Related Items
	Coin Switch Cover - Late (Bally) Part #: P-6297-5 Condition: New Metal cover for coin switch on older Bally games from approx. 1978-1984. Can also be used in place of earlier style cover #... more Out of Stock - Discontinued   more info... Details | Related Items
	Coin Guide Spacer - Quarters (Bally) Part #: P-6431-1 Condition: New Metal coin guide spacer for quarter coins. Fits Bally games approx. 1971-1984. Out of Stock - Discontinued   more info... Details | Related Items
	Bracket (Bally) Part #: P-6442-245 Condition: Used Bracket used in older Bally pinball games. Out of Stock - Discontinued   more info... Details | Related Items
	Flipper Plunger Stop Bracket - Left/Right (Bally) Part #: P-6665-444 Condition: New 90-degree metal bracket which serves as a stop for the front of the coil plunger/link on flipper assemblies in Bally games... more In Stock $6.99 each     Order | Details | Related Items
	Bracket - Backbox Insert Door Stop / Securing (Bally) Part #: P-6665-540 Condition: New Metal bracket which holds a screw for latching backbox insert panel in closed position. Two used per game. Out of Stock - Discontinued   more info... Details | Related Items
	Bracket - Coin Door Lock (Bally) Part #: P-6665-610 Condition: New Metal reinforcement bracket for coin door lock on Bally 3-slot doors used from early 1970s through early 1980s. Serves as a... more Out of Stock - Discontinued   more info... Details | Related Items
	Coin Slot Cover - Metal (Bally) Part #: P-6688-31 Condition: New Metal cover with 2 screw holes. Used to cover slots in top coin return bracket for unused coin slots. Use with screw #... more Out of Stock - Discontinued   more info... Details | Related Items
	Coin Lockout Coil Mounting Bracket (Bally) Part #: P-7225-3 Condition: New Mounting bracket or frame for coin door lockout coil. Part of coil assembly # AS-2517-29. Mounts on left side of #3 coin... more Out of Stock - Discontinued   more info... Details | Related Items
	Chime Bar - High Tone (Bally) Part #: P-7339 Condition: New Metal chime bar for scoring sounds in older electro-mechanical (EM) or early electronic solid-state (SS) Bally pinball game.... more Out of Stock - Discontinued   more info... Details | Related Items
	Bracket - Coil - Replay Knocker (Bally) Part #: P-7378-1 Condition: New Coil mounting bracket for replay knocker assembly used on many older Bally games. Out of Stock - Discontinued   more info... Details | Related Items
	Coin Door Back Plate (Bally) Part #: P-7492 Condition: New Metal backing plate for coin door on older Bally games from approx. 1972-1984. Out of Stock - Discontinued   more info... Details | Related Items
	Coin Return Door (Bally) (SEE NOTE) Part #: P-7493-1 Condition: New Metal coin return door or flap for older Bally games from approx. 1972-1984. NOTE: Bally... more Out of Stock - Discontinued   more info... Details | Related Items
	Coin Slot Entry Plate - Quarter (Bally) Part #: P-7601 Condition: New Stainless steel coin slot entry plate for US quarters (25-cent). Used on older Bally pinball games from early 1970s through... more Non-stocked, special-order item. $5.09 each     Details | Related Items
	Coin Return Cover Plate (Bally) Part #: P-7712 Condition: New Metal cover plate for coin return tray on older Bally games from approx. 1972-1984. Out of Stock - Discontinued   more info... Details | Related Items
	Switch Guard Bracket - Coin Door (Bally) Part #: P-7716 Condition: New Metal start switch protector bracket for inside of coin door on older Bally games from approx. 1972-1984. Out of Stock - Discontinued   more info... Details | Related Items
	Washer - Ball Shooter (Bally) Part #: P-801-507 Condition: New Discontinued - use # 242-5014-00 as replacement. Flat washer used on ball shooter... more Out of Stock - Discontinued   more info... Details | Related Items
	Pushbutton Switch Assembly - 1-1/2-Inch Yellow Part #: PBA15Y Condition: New Medium size pushbutton switch assembly. Housing (base) measures 1-3/4 inches outer diameter with 1-1/2 inch diameter... more Temporarily out. Please check back.   more info... $13.89 each     Details | Related Items
	Coin Door Price Plate - Red Quarters (Williams) Part #: PDG002 Condition: New Plastic price tag, or plate for coin slots on Williams 2- and 3-slot coin doors, used from mid-1960s to mid-1980s. Quarters... more Out of Stock - Discontinued   more info... Details | Related Items
	Coin Door Price Plate - Yellow Dollars (Williams) Part #: PDG003 Condition: New Plastic price tag- or Plate - for coin slots on Williams 2- and 3-slot coin doors, used from mid-1960s to mid-1980s. Dollars... more Out of Stock - Discontinued   more info... Details | Related Items
	Coin Door Price Plate - Yellow Dollars (BLEMISH) (Williams) Part #: PDG003B Condition: New Blemished part- has a small bend on top left corner, and cut/scrape on lower left corner. Can be cleaned-up to fit and... more Out of Stock Details | Related Items
	Credit Button Decal (Chicago Coin / Stern) Part #: PDG282 Condition: New Reproduction round Credit Button decal for use on Chicago Coin and Stern electro-mechanical (EM) and solid-state (SS) games,... more In Stock $4.00 each     Order | Details | Related Items
	Alvin G. Cabinet / Shop-Out Decal Set (11pcs) Part #: PDG319 Condition: New NOS factory originals! Cabinet or "shop-out" decal set for use on any Alvin G. & Co. game. Includes 11 pieces, as... more In Stock $14.95 set     Order | Details | Related Items
	Alvin G. Service Decal Part #: PDG323 Condition: New NOS factory original! "Service" reminder decal for use in cabinet of any Alvin G. & Co. game. Self-adhesive decal-... more In Stock $3.00 each     Order | Details | Related Items
	Alvin G. Number-of- Balls Decal Set- 3pcs Part #: PDG324 Condition: New Number-of-balls decal set for use with any Alvin G. & Co. game. Can also be used on other makes/models as well. Self-adhesive... more In Stock $5.00 set     Order | Details | Related Items
	Alvin G. High Voltage Decal Part #: PDG325 Condition: New NOS factory original! High voltage decal for use in main cabinet or backbox on any Alvin G. game. Can be used on any other... more In Stock $3.00 each     Order | Details | Related Items
	Williams Cabinet Instruction Booklet Envelope Part #: PDG330 Condition: New Reproduction envelope used to hold the small Instruction Booklet (or "Operators Handbook") used with solid-state Williams... more Currently Unavailable   more info... $5.95 each     Details | Related Items
	Spider-Man (Stern) Spider-Man Logo Decal Part #: PDG341 Condition: New Oval Spider-Man logo decal for Stern Spider-Man pinball. Measures about 3-1/2" inches wide. Durable textured front... more In Stock $15.00 each     Order | Details | Related Items
	Stern Games (1977-1985) Fuse/Rectifier Board Decal Part #: PDG349 Condition: New Replacement decal for Stern solid-state (SS) pinball games. Mounts on the metal mounting plate just above the fuse/rectifier... more In Stock $5.00 each     Order | Details | Related Items
	Decal - Rear Cabinet Ground Warning (Williams) Part #: PDG354 Condition: New Large orange decal for back of main cabinet on early Williams electronic solid-state (SS) pinball games. Gives warning for... more In Stock $4.50 each     Order | Details | Related Items
	Decal - High Voltage - Lockdown Bar Latch (Bally / Williams) Part #: PDG355 Condition: New This nice looking warning decal mounts on the latch under the front glass lockdown bar on Bally and Williams games, approx.... more In Stock $4.99 each     Order | Details | Related Items
	Firepower (Williams) Warning Decal Part #: PDG356 Condition: New Warning decal for latch under glass lockdown bar. Used only on Williams Firepower pinball. Used to warn against causing... more In Stock $5.99 each     Order | Details | Related Items
	Decal - Backbox Ground Strap (Bally / Williams) Part #: PDG357 Condition: New This decal mounts in the backbox on most Williams and later-model Bally electronic pinball games near the connection point for... more In Stock $1.99 each     Order | Details | Related Items
	Decal Set - TESTED BY - 3pcs (Williams) Part #: PDG358 Condition: New Set of three yellow TESTED BY decals for Williams solid-state pinball cabinets. Reproductions of decals originally used at the... more In Stock $5.00 set     Order | Details | Related Items
	Decal - Sound Board Test Button (Williams) Part #: PDG359 Condition: New Small decal that mounts next to and/or under the test/diagnostic button on sound boards in early Williams solid-state pinball... more In Stock $0.89 each     Order | Details | Related Items
	Decal - Coin Door Test Button (Williams) Part #: PDG361 Condition: New For use with 2- or 3-button panels on inside of coin door (cut 'high score reset' end off for use with 2-button panels). This... more In Stock $4.50 each     Order | Details | Related Items
	Decal Set - Coin Mechanism - 2pcs (Williams) Part #: PDG362 Condition: New This 2-piece decal set mounts on the inside edge of the coin door on early Williams solid-state games from approx. 1977-1983.... more In Stock $7.99 set     Order | Details | Related Items
	Decal - Coin Switch Cover (Williams) Part #: PDG363 Condition: New This small decal mounts on one (or more) of the late version plastic coin switch covers in... more In Stock $0.89 each     Order | Details | Related Items
	Decal Set - Coin Door Interior Decal - 5pcs (Williams) Part #: PDG364 Condition: New 5-piece decal set for the interior of coin doors on Williams games approx. 1977-1985. Includes coin tag and mechanism... more In Stock $14.99 set     Order | Details | Related Items
	Cactus Canyon (Bally) Cabinet Decal Set - Backbox Sides (2pcs) Part #: PDG404 Condition: New Factory-original NOS decal set for backbox sides (1 left, 1 right) on Bally Cactus Canyon pinball. Supplied direct from... more Out of Stock - Discontinued   more info... Details | Related Items
	Arcade Legends 3 (Chicago Gaming) Cabinet Decal - Left Side Partial Part #: PDG405 Condition: New Lower portion of left cabinet decal used on Chicago Gaming Arcade Legends 3 video game- upright model. This was... more In Stock $25.00 each     Order | Details | Related Items
	Monster Bash (Williams) Cabinet Decal - LEFT Backbox Side Part #: PDG406 Condition: New Factory-original NOS decal for LEFT backbox side on Williams Monster Bash pinball. Supplied direct from Williams in late... more In Stock $100.00 each     Order | Details | Related Items
	Cactus Canyon (Bally) Cabinet Decal Set - Full Set (5pcs) Part #: PDG408 Condition: New Factory-original NOS cabinet decal set for Bally Cactus Canyon pinball. Set consists of 5 pieces- 2 main cabinet side... more Out of Stock $350.00 set     Details | Related Items
	Cactus Canyon (Bally) Main Cabinet Side Decal Set (2pcs) (BLEMISH) Part #: PDG409 Condition: New (Blemish) Minor blemish 2-piece decal set for cabinet sides on Bally Cactus Canyon pinball. See additional images below for... more In Stock $200.00 set     Order | Details | Related Items
	Funhouse (Williams) Cabinet Decal Set - Full Set (5pcs) Part #: PDG412 Condition: New Reproduction cabinet decal set for Williams Funhouse pinball. Set consists of 5 pieces- 2 main cabinet side decals, 1... more In Stock $300.00 set     Order | Details | Related Items
	Cactus Canyon (Bally) Main Cabinet Side Decal (1pc) Part #: PDG414 Condition: New Factory-original NOS main cabinet side decal for Bally Cactus Canyon pinball. 1 piece only- can be used on left or right... more In Stock $150.00 each     Order | Details | Related Items
	Getaway (Williams) Shifter Handle Surround Decal Part #: PDG416 Condition: New Reproduction decal for the ball shooter shifter handle used on Williams Getaway pinball. This decal mounts around the... more In Stock $20.00 each     Order | Details | Related Items
	Beat Time (Williams) Backglass Part #: PDG430 Condition: New New/unused replacement backglass for Williams Beat Time pinball. Reproduction glass produced many years ago, yet never... more Out of Stock $399.99     Details | Related Items
	Creature From the Black Lagoon (Bally) Cabinet Front Decal Part #: PDG444 Condition: New Replacement artwork decal for front of main cabinet on Bally Creature From the Black Lagoon pinball. Aftermarket... more Out of Stock $50.00 each     Details | Related Items
	Multicade Video Game Cabinet Decal Set 19 x 26 in. (2pcs) (Special-Order Item) Part #: PDG445 Condition: New Special-order item. Takes approx. 1-2 weeks to get in before shipping. 2-piece set of cabinet side-art decals for... more Non-stocked, special-order item. $62.00 set     Details | Related Items
	Decal - High Voltage - Bally AS-2518-54 Power Supply Shield Part #: PDG447 Condition: New New replacement decal for clear plastic shield # P-2692-2 that mounts over AS-2518-54 power... more In Stock $0.79 each     Order | Details | Related Items
	Decal - High Voltage - Bally Solenoid/Regulator Board Shield (SEE NOTE) Part #: PDG448 Condition: New New replacement decal for clear plastic shield # M-1837 which mounts over high voltage... more In Stock $0.89 each     Order | Details | Related Items
	Rocky and Bullwinkle (Data East) Backbox Animation Decal Set (3pcs) Part #: PDG477 Condition: New 3-piece set of new replacement decals for the pop-up animal plastics used in the backbox mechanism on Data East Rocky and... more In Stock $30.00 set     Order | Details | Related Items
	Spider-Man (Stern) Spidey Logo Decal Part #: PDG496 Condition: New Spidey logo decal for Stern Spider-Man pinball. Oval shape. Measures 3-5/8 wide, 2-3/4 inch tall. Easy to install- just... more In Stock $3.00 each     Order | Details | Related Items
	NFL (All Teams) (Stern) Logo Decal Part #: PDG497 Condition: New Round Stern logo decal with NFL football and Stern tech support phone number. Measures 2-inches diameter. Easy to install- just... more In Stock $1.25 each     Order | Details | Related Items
	Eight Ball Deluxe Limited Edition (Bally) Backbox Adjustments / Self-Test Chart Part #: PDG506 Condition: New New reproduction 8-1/2 x 10 inch chart for backbox insert panel. Available as a self-adhesive decal (peel-and-stick... more In Stock $15.00 each     Order | Details | Related Items
	Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games) Part #: PGDC Condition: New High quality heavy black playfield dust cover. Fits standard width pinball games with glass measuring 21 x 43 inches. Covers... more In Stock $29.99 each     Order | Details | Related Items
	Pushbutton Switch - Round SPST OFF-(ON) RED Part #: R13-502MA-05-BR Condition: New Round pushbutton switch assembly with red actuator. Common video game pushbutton for fire trigger, service, credits, etc.... more In Stock $6.99 each     Order | Details | Related Items
	Tape - Side-Rail Mounting (For 1 Rail) (Bally/Williams) Part #: RAILTAPE Condition: New 39-inch (1 meter) roll of double-sided adhesive foam tape used for mounting metal side-rail to cabinet on Bally/Williams games... more Out of Stock $3.50 roll     Details | Related Items
	Tubing - #10 x 0.106 ID (Bally/Williams) Part #: RM-21-03 Condition: New Tubing used for various mechanisms on some later-model Bally/Williams games. Out of Stock - Discontinued   more info... Details | Related Items
	Bushing - Latch Lever (Bally) Part #: S-156-410 Condition: New Bushing used for P-6363 lockdown bar release latch on older Bally games approx. 1972-1985. Out of Stock - Discontinued   more info... Details | Related Items
	Coil Plunger - Stepper Unit (Bally) (SEE NOTE) Part #: S-496-100 Condition: New Coil plunger for stepper units used in many 1960s and 1970s Bally games. Hole in one end, groove in other end. Measures about... more Non-stocked, special-order item. $11.39 each     Details | Related Items
	Flipper Pushbutton Switch Assembly (Consolidated / Philips / Rapid / Sentinel / Wonder Wizard) Part #: SENT_FLBT Condition: New Black plastic flipper button assembly with internal electrical contacts and spade lug connectors for late 1970s home model... more Out of Stock - Discontinued   more info... Details | Related Items
	Coin Rejector Lever and Pivot Assembly AS-2487 (Bally) (USED) Part #: U10 Condition: Used - Good Used coin rejector lever/pivot assembly with bracket for older Bally games from approx. 1972-1984. Bally part # AS-2487. ... more In Stock $10.00 each     Order | Details | Related Items
	Bracket - Backglass Release (USED) Part #: U1097 Condition: Used - Excellent Used metal bracket for backglass release as used in many older electro-mechanical (EM) pinball games. Mounts to top interior... more In Stock $7.50 each     Order | Details | Related Items
	Ball Shooter Internal Spring 10-148-4 (Standard Strength) (USED) Part #: U1100 Condition: Used - Excellent Used standard strength plunger spring for most games. Replaces Bally # SP-200-24, Data East # 266-5001-04, and Bally/Williams... more In Stock $0.50 each     Order | Details | Related Items
	Pushbutton Lens - Transparent Red (USED) Part #: U1102 Condition: Used - Good Used red transparent plastic lens for cabinet pushbutton. Measures just under 1-inch diameter, and snaps on to front of... more Out of Stock $0.75 each     Details | Related Items
	Stepper Unit Gear and Shaft - 22-Step (USED) Part #: U1104 Condition: Used - Very Good Used metal stepper unit gear and shaft. Uncertain of manufacturer, but likely Williams, maybe Bally. 22 teeth on either side,... more In Stock $20.00 each     Order | Details | Related Items
	Service Button and Bracket Assembly 27-1099 - 4 Buttons - Early Models (Bally/Williams) (SEE NOTE) (USED) Part #: U1110 Condition: Used - Very Good Used service button and mounting bracket assembly for some early-model Bally/Williams WPC games. ... more In Stock $50.00 each     Order | Details | Related Items
	Service Button Assembly - 4 Buttons (Bally/Williams) (USED - FOR REPAIR/PARTS) Part #: U1111 Condition: Used - Fair Used coin door service button assembly with 4 momentary-contact pushbutton switches. One end button sticks and may need... more In Stock $10.00 each     Order | Details | Related Items
	Coin Slot Entry / Reject Button - No Cover (USED) Part #: U1121 Condition: Used - Good Used red plastic coin slot entry / reject button housing. No price tag or front cover. Commonly used on older Coin Controls... more In Stock $5.00 each     Order | Details | Related Items
	Ball Shooter Rod 20-9253-7 With Black Knob (Bally / Williams) (USED) Part #: U1123 Condition: Used - Good Used ball shooter rod with black plastic knob. Factory part # 20-9253-7. Replaces Bally/Williams part #20-9253-7, Capcom #... more In Stock $3.50 each     Order | Details | Related Items
	Ball Shooter Rod - 8-3/4 In. Shaft - Metal Knob (USED) Part #: U1125 Condition: Used - Good Used ball shooter rod with metal knob. Long shaft measuring 8-3/4 inches from back of knob to tip. 9-7/16 inches overall... more In Stock $7.50 each     Order | Details | Related Items
	Cover Plate - Coin Door Bill Validator (USED) Part #: U1139 Condition: Used - Very Good Used black metal plate for dollar bill validator (DBV) opening on some brands of coin doors. This part is likely for a CoinCo... more Out of Stock $5.00 each     Details | Related Items
	Retainer 27-1083 - Coin Mechanism (USED) Part #: U1140 Condition: Used - Good Used black plastic coin mechanism retainer. Mounts to coin slot and hinges down to hold top of coin mechanism. Used in some... more In Stock $9.00 each     Order | Details | Related Items
	Coin Switch Acceptor Chute - Black Plastic (USED) Part #: U1141 Condition: Used - Good Used coin switch acceptor chute. Uncertain of brand. Used with # 42-1351-00 trip-wire... more In Stock $3.50 each     Order | Details | Related Items
	Line Cord Cover Plate - Black Plastic 2-1/2 x 2-1/2 w/ Cord Button (USED) Part #: U1145 Condition: Used - Excellent Used line cord cover / mounting plate. Black plastic measuring 2-1/2 inches square. Includes button for cinching line cord in... more In Stock $4.50 each     Order | Details | Related Items
	Score Display Tray A-3843 (Bally / Midway) Part #: U1154 Condition: Used - Good Used metal score display tray used on early Bally electronic solid-state (SS) pinball games, approx. 1977 through early 1986.... more Out of Stock $10.00 each     Details | Related Items
	Bracket 01-3493-1 - Cash Box (Williams) (USED) Part #: U1155 Condition: Used - Good Used metal bracket for coin box locking/securing. Factory part # 01-3493-1. Mounts in center of cabinet behind coin box area... more In Stock $7.25 each     Order | Details | Related Items
	Lift Trim - Stainless Steel - 28-1/2 Inch - for 1/8 inch Thick Backglass (USED) (SEE NOTE) Part #: U1161 Condition: Used - Fair Used metal backglass lift channel. Fits 1/8 inch thick backglasses. 28-1/2 inches overall length. ... more Out of Stock $13.00 each     Details | Related Items
	Line Cord Cover Plate - Black Metal 2-1/2 x 2-1/2 w/ Cord Button (USED) Part #: U1162 Condition: Used - Excellent Used line cord cover / mounting plate. Black metal measuring 2-1/2 inches square. No screw holes. Includes button for cinching... more In Stock $4.50 each     Order | Details | Related Items
	Coin Entry Plate - Dollar Coin (Gottlieb) (USED) Part #: U1179 Condition: Used - Very Good Used red transparent plastic coin entry plate for US dollar coins. Includes tag for $1/4-Plays. Used on some coin doors on... more In Stock $10.00 each     Order | Details | Related Items
	Bracket 01-12352 - Playfield Support Arm (Bally/Williams) (USED) Part #: U1191 Condition: Used - Excellent Used metal 90-degree bracket that mounts on right inside wall of main cabinet and holds end of playfield support arm when in... more In Stock $6.50 each     Order | Details | Related Items
	Flipper Button - Red A-16883-4 (Bally/Williams) (USED) Part #: U1199 Condition: Used - Good Used red plastic pushbutton with internal spring and threaded housing. Standard size button measuring 15/16-inches deep,... more In Stock $1.00 each     Order | Details | Related Items
	Coin Box Lid - 2-Slot (Williams) (USED) Part #: U1262 Condition: Used - Good Used metal lid for coin box as used in some Williams and later-model Bally games. Accommodates some 2-slot coin doors. ... more In Stock $12.50 each     Order | Details | Related Items
	Coin Box Insert Tray 3C-7291 - Dual Slot - White Plastic (Williams) (USED) Part #: U1265 Condition: Used - Good Used white plastic coin tray for older Williams games that use a metal coin box (most games approx. mid 1960s through early... more In Stock $10.00 each     Order | Details | Related Items
	Playfield Glass Top Trim - Plastic - 20-5/16 Inch (USED) Part #: U1275 Condition: Used - Good Used black plastic trim that mounts at top of playfield glass. Covers top edge of glass. Secured behind metal trim brace.... more In Stock $12.50 each     Order | Details | Related Items
	Playfield Glass Top Trim - Metal - 20-3/8 Inch (USED) Part #: U1276 Condition: Used - Good Used stainless steel trim that mounts at top of playfield glass. Covers top edge of glass. Secured behind metal trim brace.... more In Stock $20.00 each     Order | Details | Related Items