- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Leaf Switch Set w/ Brackets and Resistor/Capacitor - Slingshot (2pcs) - Brackets Reversed (Williams):
Price: $38.54 set
Status: In Stock
(6 Available)
Part #: SW-1A-114-120-BKT-5
Condition: New
|
|
|
Mounting brackets on both switches are reversed on this item (face backward). Same as # SW-1A-114-120-BKT, but with both switch brackets reversed.
Set of 2 leaf switches riveted to 90-degree mounting brackets and connected together with jumper wires for use on slingshot bumpers/kickers in many older electronic solid-state (SS) Williams pinball games (see game listing below).
Includes resistor/capacitor pre-installed on 3-lug switch.
Brackets are mounted to back (short blade side) on both switches (see INSTALLATION NOTES below).
Replaces older switch part #s A-4834-H (2-lug switch), B-8734 (3-lug switch with resistor/capacitor combo- for early games).
SWITCH MEASUREMENTS: Overall length: 3-1/16 inches. Length of long blade out from switch stack: 1-15/16 inches. Length of short blade out from switch stack: 1-3/8 inches. Contact points 1-7/32 inch out from switch stack. Switch stack body: 3/4 inches long x 3/8 wide x 3/8 high. Screw mounting holes 1/8 inch diameter, 3/8 inch center-to-center.
INSTALLATION NOTES: - Most games require both switches to have mounting brackets on the FRONT of the switch (this set has brackets the rear). If you need both switches on the front, order switch set # SW-1A-114-120-BKT instead.
- See Related Items listing below for other configurations.
- Switch contacts are wired in parallel, so that activation of either switch will make the slingshot bumper kick.
- Switch using a resistor/capacitor combo (early-model games) will connect to existing wiring (black and orange wires) with black wire going to lug connecting to capacitor negative lead, and orange wire going to lug connecting to resistor.
NOTE: No returns on Electronics - all sales final.
Ask a question about this item
|
Leaf Switch Set w/ Brackets and Resistor/Capacitor - Slingshot (2pcs) - Brackets Forward (Bally/Williams)
|
Part # SW-1A-114-120-BKT
$29.96 set |
|
|
Leaf Switch Set w/ Brackets and Resistor/Capacitor - Slingshot (2pcs) - 2-Lug Bracket Reversed (Williams)
|
Part # SW-1A-114-120-BKT-3
$35.54 set |
|
|
Leaf Switch Set w/ Brackets and Resistor/Capacitor - Slingshot (2pcs) - 3-Lug Bracket Reversed (Williams)
|
Part # SW-1A-114-120-BKT-4
$35.54 set |
|
|
Leaf Switch Set w/ Brackets and Diode - Slingshot Bumper (2pcs) (Bally/Williams)
|
Part # SW-1A-114-120-BKT-1
$28.37 set |
|
|
Leaf Switch Set w/ Brackets and Diode - Slingshot Bumper (2pcs) (Bally/Williams)
|
Part # SW-1A-114-120-BKT-2
$33.54 set |
|
|
Switch Assembly - Slingshot Kicker (Bally/Williams)
|
Part # A-11539-1
$29.56 each |
|
|
Switch Assembly - Slingshot Kicker (Bally/Williams)
|
Part # A-17801
$27.98 each |
|
|
Leaf Switch - 2-Lug - Slingshot Bumper / Rebound (Bally/Williams)
|
Part # SW-1A-114
$6.69 each |
|
|
Leaf Switch - 3-Lug - Slingshot Bumper / Rebound (Bally/Williams)
|
Part # SW-1A-120
$6.29 each |
|
|
Screw - #6 x 1/2 (10-PACK) Hex Washer Head (HWH) Wood Thread (SMS)
|
Part # HWR02-030606-10PK
$1.50 set/10 |
|
|
Screw - #5 x 3/4 (10-PACK) Phillips Pan Head (PPH) Wood Thread (SMS)
|
Part # HWR02-010510-10PK
$2.30 set/10 |
|
|
Screw - #5-40 x 5/8 (10-PACK) Phillips Pan Head (PPH) Machine Thread (MS)
|
Part # HWR02-020508-10PK
$2.00 set/10 |
|
|
Nut - #5-40 KEPS (10-PACK)
|
Part # HWR01-030500-10PK
$2.00 set/10 |
|
|
1N4004 Diode
|
|
|
Capacitor - 22uF 25v Axial Lead
|
Part # CAP22UF25VAXL
$1.69 each |
|
|
100-ohm Resistor - 1/4-Watt Carbon Film 5% Tolerance
|
Part # RES100-1/4W
$0.29 each |
|
|
Slingshot Bumper Leaf Switch (Data East/Sega/Stern)
|
Part # 180-5054-00
$9.79 each |
|
|
Leaf Switch Adjustment Tool
|
Part # SW_TOOL
$6.99 each |
|
|
2-1/2 Inch White Rubber Ring (SEE NOTE)
|
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Wire Nut -Small - 16-20ga
|
Part # WIRENUT1
$0.39 each |
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
18 Inch Test Lead Set (10pcs)
|
Part # TESTLEADS10
$7.99 each |
|
|
Heat Sink Compound - 5g Tube
|
|
|
Rubber Assortment Kit - White (50pcs)
|
Part # KIT000W
$29.70 each |
|
|
#44 Lamp (Box of 10)
|
|
|
#555 Lamp (Box of 10)
|
|
|
Lamp Assortment Kit (#44,#555,#906,#89)
|
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #555 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED555D
$1.19 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|