|
- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Leaf Switch Set w/ Brackets and Resistor/Capacitor - Slingshot (2pcs) - 3-Lug Bracket Reversed (Williams):
Price: $35.54 set
Status: In Stock
(8 Available)
Part #: SW-1A-114-120-BKT-4
Condition: New
|
|
|
Mounting bracket on 2-lug switch is reversed on this item (faces backward). Same as # SW-1A-114-120-BKT, but with 2-lug switch bracket reversed.
Set of 2 leaf switches riveted to 90-degree mounting brackets and connected together with jumper wires for use on slingshot bumpers/kickers in many older electronic solid-state (SS) Williams pinball games (see game listing below).
Includes resistor/capacitor pre-installed on 3-lug switch.
Brackets are mounted to back (short blade side) on 2-lug switch, and front (long blade side) on 3-lug switch (see INSTALLATION NOTES below).
Replaces older switch part #s A-4834-H (2-lug switch), B-8734 (3-lug switch with resistor/capacitor combo- for early games).
SWITCH MEASUREMENTS: Overall length: 3-1/16 inches. Length of long blade out from switch stack: 1-15/16 inches. Length of short blade out from switch stack: 1-3/8 inches. Contact points 1-7/32 inch out from switch stack. Switch stack body: 3/4 inches long x 3/8 wide x 3/8 high. Screw mounting holes 1/8 inch diameter, 3/8 inch center-to-center.
INSTALLATION NOTES: - Most games require both switches to have mounting brackets on the FRONT of the switch (this set has 1 on the front, 1 on the rear). If you need both switches on the front, order switch set # SW-1A-114-120-BKT instead.
- See Related Items listing below for other configurations.
- Switch contacts are wired in parallel, so that activation of either switch will make the slingshot bumper kick.
- Switch using a resistor/capacitor combo (early-model games) will connect to existing wiring (black and orange wires) with black wire going to lug connecting to capacitor negative lead, and orange wire going to lug connecting to resistor.
NOTE: No returns on Electronics - all sales final.
Ask a question about this item
|
Copyright © 2003-2026, Action Pinball & Amusement, LLC, All Rights Reserved.
This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.
Pinball Parts
