Click to Enlarge
|
Medusa (Bally) Sound ROM Chip U5 (2716 EPROM):
Price: $18.00 each
Status: In Stock
Part #: ROMS595
Condition: New
|
|
|
Replacement ROM chip U5 for Squawk & Talk sound/speech board. This chip is a 2716 EPROM chip.
Chip comes with installation info including a link to online step-by-step instructions (with pictures), and a diagram showing locations of ROM chips in your particular game.
Software Revision History for Medusa: None (not available, or never published/released by manufacturer).
IMPORTANT NOTES FOR EARLY BALLY & STERN ROM CHIPS:
- Replacement chips we sell are for original Bally and Stern circuit boards. They may not work on some aftermarket replacement circuit boards.
- Your board must be jumpered and/or modified to use the type of chip(s) you are installing, otherwise the board will not work. (Click here for more info).
- Before ordering, you will need to determine the type of chip you are replacing, which should match what your board is jumpered for. (Click here for more info).
- Order the type of chip that matches what your board is jumpered for. (Click here for more info).
We are not responsible if you fail to order the correct chip(s) for your board. If you have any questions, feel free to contact us. The above software is provided as a service, but is not being sold. Price above reflects the cost of the service to provide the manufacturer-owned software on game-compatible media, and installation instructions for the software that comes on the media. We do not sell or own any manufacturer software.
NOTE: No returns on ROM & Software Updates - all sales final.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Medusa
|
Chip / IC Extractor Tool - Economy
|
Part # EXT_IC1
$3.99 each |
|
|
Medusa (Bally) Game ROM Chip U2 (2532 EPROM)
|
Part # ROMS202
$18.00 each |
|
|
Medusa (Bally) Game ROM Chip U6 (2532 EPROM)
|
Part # ROMS590
$18.00 each |
|
|
Medusa (Bally) Game ROM Chip U2 (2732 EPROM)
|
Part # ROMS591
$18.00 each |
|
|
Medusa (Bally) Game ROM Chip U6 (2732 EPROM)
|
Part # ROMS592
$18.00 each |
|
|
Medusa (Bally) Sound ROM Chip U3 (2532 EPROM)
|
Part # ROMS593
$18.00 each |
|
|
Medusa (Bally) Sound ROM Chip U4 (2532 EPROM)
|
Part # ROMS594
$18.00 each |
|
|
Alltek Ultimate MPU Game ROM
|
Part # ROMS474
$21.00 each |
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
Medusa (Bally) Game Manual and Schematics (Reprint)
|
Part # PM0264
$28.18 each |
|
|
Bally Games FO-560-3 Service / Repair Manual (Reprint)
|
Part # PM0078
$34.62 each |
|
|
Bally Theory of Operation Manual FO-601-2 (May 1982) (Reprint)
|
Part # PM0080
$18.06 each |
|
|
Bally Service Bulletins Collection (Aug. 1978) (Reprint)
|
Part # PM0449
$23.12 each |
|
|
Medusa (Bally) Rubber Ring Kit
|
Part # KIT362
$21.49 each |
|
|
Medusa (Bally) Neptunes Cove Plastic (USED)
|
Part # MD_PLAS2
$20.00 each |
|
|
Medusa (Bally) Left Upper Flipper Plastic (USED)
|
Part # MD_PLAS3
$20.00 each |
|
|
Medusa (Bally) Right Upper Flipper Plastic (USED)
|
Part # MD_PLAS4
$20.00 each |
|
|
Medusa (Bally) Right Lower Slingshot Bumper Plastic (USED)
|
Part # MD_PLAS5
$15.00 each |
|
|
Medusa (Bally) Spinner Decal Set 2pcs
|
|
|
Varistor Info Card for Cabinet (Bally)
|
|
|
Factory Inspection Card for Cabinet (Bally)
|
|
|
Flipper Rebuild Kit - Left Side Only - Bally Games 1980-1988
|
Part # FLKIT6-L
$45.58 each |
|
|
Pop Bumper Body - Ivory (Bally / Midway)
|
Part # 03-8325-5
$6.99 each |
|
|
Pop Bumper Base - Plastic (Bally / Midway)
|
Part # 03-8324-5
$31.49 each |
|
|
Flipper Assembly - Linear - Left (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES)
|
Part # ASE-1587-112-A
$115.69 each |
|
|
Flipper Cap Set - 2-Inch - Left and Right w/Blue FLIPPER
|
Part # A-3739SET
$20.00 set |
|
|
Flipper Bat and Shaft - 3-Inch Red Transparent - Bally Games (Early)
|
Part # A-3994-9
$8.39 each |
|
|
Pop Bumper Skirt - White
|
Part # 03-6035-5
$0.99 each |
|
|
DIP Switch Bank - 8 Position
|
|
|
Protector - Ball Shooter Lane (Bally) (SEE NOTE)
|
|
|
Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES)
|
Part # FKBLYSS
$9.74 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 120 Pieces
|
|
|
C23 Capacitor Replacement Kit - Bally/Stern Games (1977-1985)
|
Part # KITC23CAP
$10.77 each |
|
|
#555 Lamp (Box of 10)
|
|
|
#555 Lamp (Box of 100)
|
Part # LAM555C
$20.00 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED- #555 3-Element (SEE NOTES)
|
Part # LED3555
$0.99 & up |
|
|
LED- #555 4-Element (SEE NOTES)
|
Part # LED4555
$1.25 & up |
|
|
LED- #555 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED555D
$1.19 & up |
|
|
LED- #555 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED555F
$1.29 & up |
|
|
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
|
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Game Lock With Keys - 1-1/8 Inch - Single-Bitted
|
Part # LOCKSB118
$6.99 each |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|