- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Flash Gordon (Bally) Sound/Speech ROM Chips (2532 EPROMs) w/ Voc (SEE NOTES):
Price: $18.00 each
Status: Out of Stock
Part #: ROMS556
Condition: New
|
|
|
Replacement ROM chips for Sounds Plus sound board, and Vocalizer speech board, as used in some Flash Gordon games (see note below). If your Flash Gordon game uses the Squawk & Talk sound/speech board instead (this is more common), click here.
These chips are 2532 EPROM chips.
Chips come with installation info including a link to online step-by-step instructions (with pictures).
Software Revision History for Flash Gordon: None (not available, or never published/released by manufacturer).
IMPORTANT NOTES FOR Flash Gordon: Most Flash Gordon games used the Squawk & Talk sound/speech board. A few used the Vocalizer board, which requires special chips for CPU U6, sound board U4, and Vocalizer board U1-U7.
ROM chips for Vocalizer board are available only in English language. French and English versions for the Squawk & Talk board both use the same MPU board game ROM chips.
IMPORTANT NOTES FOR EARLY BALLY & STERN ROM CHIPS:
- Replacement chips we sell are for original Bally and Stern circuit boards. They may not work on some aftermarket replacement circuit boards.
- Your board must be jumpered and/or modified to use the type of chip(s) you are installing, otherwise the board will not work. (Click here for more info).
- Before ordering, you will need to determine the type of chip you are replacing, which should match what your board is jumpered for. (Click here for more info).
- Order the type of chip that matches what your board is jumpered for. (Click here for more info).
We are not responsible if you fail to order the correct chip(s) for your board. If you have any questions, feel free to contact us. The above software is provided as a service, but is not being sold. Price above reflects the cost of the service to provide the manufacturer-owned software on game-compatible media, and installation instructions for the software that comes on the media. We do not sell or own any manufacturer software.
NOTE: No returns on ROM & Software Updates - all sales final.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Flash Gordon (with Vocalizer board)
|
Chip / IC Extractor Tool - Economy
|
Part # EXT_IC1
$3.99 each |
|
|
Flash Gordon (Bally) Game ROM Chip U2 (2532 EPROM)
|
Part # ROMS117
$18.00 each |
|
|
Flash Gordon (Bally) Game ROM Chip U6 (2532 EPROM) w/ ST (SEE NOTES)
|
Part # ROMS550
$18.00 each |
|
|
Flash Gordon (Bally) Game ROM Chip U6 (2532 EPROM) w/ Voc (SEE NOTES)
|
Part # ROMS551
$18.00 each |
|
|
Flash Gordon (Bally) Game ROM Chip U2 (2732 EPROM)
|
Part # ROMS552
$18.00 each |
|
|
Flash Gordon (Bally) Game ROM Chip U6 (2732 EPROM) w/ ST (SEE NOTES)
|
Part # ROMS553
$18.00 each |
|
|
Flash Gordon (Bally) Game ROM Chip U6 (2732 EPROM) w/ Voc (SEE NOTES)
|
Part # ROMS554
$18.00 each |
|
|
Flash Gordon (Bally) Sound/Speech ROM Chips (2532 EPROMs) w/ ST (SEE NOTES)
|
Part # ROMS555
$18.00 each |
|
|
Alltek Ultimate MPU Game ROM
|
Part # ROMS474
$21.00 each |
|
|
Flash Gordon (Bally) Game Manual and Schematics (Reprint)
|
Part # PM0155
$27.72 each |
|
|
Bally Games FO-560-3 Service / Repair Manual (Reprint)
|
Part # PM0078
$34.62 each |
|
|
Bally Theory of Operation Manual FO-601-2 (May 1982) (Reprint)
|
Part # PM0080
$18.06 each |
|
|
Flash Gordon (Bally) Score Card - 5-Ball
|
Part # SI_FG_A
$2.50 each |
|
|
Flash Gordon (Bally) Rubber Ring Kit
|
Part # KIT099
$16.17 each |
|
|
Flash Gordon (Bally) Drop Target Set w/ Decals (11pcs)
|
Part # A-3944-FG
$55.00 set |
|
|
Flash Gordon (Bally) Spinner Decal Set (4pcs)
|
|
|
Flash Gordon (Bally) Xenon Flash Tube (Substitute - SEE NOTE)
|
|
|
Capacitor - 22uF 250v Axial Lead
|
Part # CAP22UF250VAXL
$3.79 each |
|
|
Orange Star Rollover Housing w/ White Star Button
|
Part # C-900901-O
$2.99 each |
|
|
Protector - Ball Shooter Lane (Bally) (SEE NOTE)
|
|
|
Flipper Assembly - Linear - Right (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES)
|
Part # ASE-1587-111-A
$115.69 each |
|
|
Flipper Bat and Shaft - 3-Inch White - Bally Games (Early)
|
Part # A-3994-5
$7.59 each |
|
|
Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES)
|
Part # FKBLYSS
$9.74 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 127 Pieces
|
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
C23 Capacitor Replacement Kit - Bally/Stern Games (1977-1985)
|
Part # KITC23CAP
$10.77 each |
|
|
#44 Lamp (Box of 10)
|
|
|
#47 Lamp (Box of 100)
|
Part # LAM047C
$20.00 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #44 / #47 4-Element (SEE NOTES)
|
Part # LED4044
$1.25 & up |
|
|
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED044D
$1.19 & up |
|
|
LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED044F
$1.29 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Game Lock With Keys - 1-1/8 Inch - Single-Bitted
|
Part # LOCKSB118
$6.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|