Click to Enlarge
|
Funhouse (Williams) ROM Chips (for Games with System 11 Sound Board):
Price: $18.00 each
Status: In Stock
Part #: ROMS127
Condition: New
|
|
|
NOTE: Chips listed here are confirmed compatible with early-production Funhouse games using the System 11 sound board. These chips may not be compatible with standard-production games using the all-WPC boardset, and may not work properly in those games.
Replacement ROM chips. Chips come with installation info including a link to online step-by-step instructions (with pictures), and a diagram showing locations of ROM chips in your particular game.
Notes for Prototype/Early-Production Funhouse Sound ROMs: Early models of this game used the Williams # A-13971 sound board, which is different than other sound boards used in other pinball games of this era. The sound ROM chips provided here are specifically for the A-13971 sound board, and will not fit/work on other boards used in System 11 or WPC pinball games. If your early Funhouse game does not have the A-13971 sound board, then the sound chips provided here will not work in your game.
Select and order above. Not sure what version you need? Click here for help.
Software Revision History for Funhouse (Sys 11 Prototype): None (not available, or never published/released by manufacturer).
Officially-released Bally & Williams software that we supply are Genuine Bally/Williams Replacement Parts and are supplied with permission of Planetary Pinball Supply, Inc. Each copy includes a $2 non-refundable charge which covers Williams Electronics Games licensing fee and a processing fee. Official terms of software use and licensing can be reviewed here. Your purchase and use of official Bally/Williams software that we provide indicates your acceptance of, and compliance with, the terms in the Williams Software License.
The above software is provided as a service, but is not being sold. Price above reflects the cost of the service to provide the manufacturer-owned software on game-compatible media, and installation instructions for the software that comes on the media. We do not sell or own any manufacturer software.
NOTE: No returns on ROM & Software Updates - all sales final.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
WILLIAMS: Funhouse (Sys 11 Prototype)
|
Funhouse (Williams) ROM Chips (for Games with WPC Sound Board)
|
Part # ROMS126
$18.00 each |
|
|
Chip / IC Extractor Tool - Economy
|
Part # EXT_IC1
$3.99 each |
|
|
Funhouse (Williams) Game Manual (Reprint)
|
Part # PM0165
$44.74 each |
|
|
Funhouse (Williams) Operators Handbook (Reprint)
|
|
|
Funhouse (Williams) Game Manual Amendment (Reprint)
|
|
|
Funhouse (Williams) Game Manual Amendment #2 (Reprint)
|
|
|
Funhouse (Williams) Rubber Ring Kit
|
Part # KIT100
$28.68 each |
|
|
Funhouse / Road Show (Williams) Rudy / Ted Eyeball
|
|
|
Funhouse (Williams) Eyelids - Rudy
|
Part # 03-8469
$36.99 each |
|
|
Funhouse (Williams) Trap Door Lane Plastic
|
Part # 03-8502
$21.99 each |
|
|
Funhouse (Williams) Slingshot Bumper Plastics Set w/ Protective Film 2pcs (Reproduction)
|
Part # 31-1-50003-SS
$30.00 set |
|
|
Funhouse (Williams) Magic Mirror Plastic
|
Part # 31-1602
$39.99 each |
|
|
Funhouse (Williams) Left Ramp (USED)
|
Part # A-13895U
$90.00 each |
|
|
Funhouse (Williams) Scoop Plastic w/ Balloons
|
|
|
Funhouse (Williams) S Target Plastic w/ Popcorn
|
|
|
Funhouse (Williams) Superdog Targets Plastic
|
|
|
Funhouse (Williams) Rudy Jaw Plastics
|
|
|
Funhouse (Williams) Hidden Hallway Sign Plastic
|
Part # PDG224
$12.50 each |
|
|
Funhouse (Williams) Red Plastic w/ Balloon
|
|
|
Funhouse (Williams) Ramp Diverter Support Bracket (USED)
|
|
|
Funhouse (Williams) Right Ramp Entrance Flap (USED)
|
|
|
Funhouse / Road Show (Williams) Crank Arm Liner - Eyes
|
Part # 01-13416
$2.99 each |
|
|
Funhouse / Road Show (Williams) Small Coil Plunger Guide
|
Part # 01-9677
$3.99 each |
|
|
Funhouse (Williams) Ball Diverter Arm Shaft
|
Part # 02-4503
$13.89 each |
|
|
Funhouse / Road Show (Williams) Jaw Drive Sector Gear
|
Part # 03-8470
$8.39 each |
|
|
Funhouse / Road Show (Williams) Jaw Drive Gear
|
Part # 03-8471
$14.99 each |
|
|
Funhouse / Road Show (Williams) Jaw Link
|
Part # 03-8472
$7.55 each |
|
|
Funhouse / Road Show (Williams) Nylon Link for Plunger - Eyelids Closed
|
Part # 03-8480
$5.99 each |
|
|
Funhouse / Road Show (Williams) Centering Flange - Eyes
|
Part # 03-8486
$2.79 each |
|
|
Funhouse (Williams) Eye Link
|
Part # 12-6928
$4.19 each |
|
|
Funhouse / Road Show (Williams) Eyelet
|
Part # 20-9668
$2.49 each |
|
|
Funhouse / Road Show (Williams) Small Coil Plunger Guide
|
Part # A-13735
$12.59 each |
|
|
Funhouse / Road Show (Williams) Rudy / Red / Ted Jaw Motor
|
Part # A-13997
$75.59 each |
|
|
Funhouse / Road Show (Williams) Bracket - Eye Assembly
|
Part # A-14027
$15.39 each |
|
|
Funhouse / Road Show (Williams) Plunger - Eyelids Closed
|
Part # A-14028
$16.99 each |
|
|
Funhouse / Road Show (Williams) Plunger - Eyelids Open
|
Part # A-14030
$20.99 each |
|
|
Funhouse (Williams) Kicker Assembly
|
Part # A-14143
$28.69 each |
|
|
Funhouse / Road Show (Williams) Crank Arm - Eyes
|
Part # A-19258
$22.99 each |
|
|
Funhouse (Williams) Cabinet Decal Set - Full Set (5pcs)
|
Part # PDG412
$300.00 set |
|
|
Kicker Assembly (Bally/Williams)
|
Part # A-14107
$57.34 each |
|
|
Coil - SM-31-900-DC (Williams)
|
Part # SM-31-900-DC
$16.99 each |
|
|
Spring - Extension - Jaw Return (Bally/Williams)
|
|
|
Spring - Compression - Head/Eyes (Bally/Williams)
|
|
|
Score Display Driver Power Supply Rebuild Kit - Williams (1990-1991)
|
Part # KIT_WMS_HV3
$26.80 each |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Flipper Rebuild Kit - Two Flippers - Bally/Williams Games 1988-1991
|
Part # FLKIT1
$57.24 each |
|
|
Fuse Kit - Bally / Williams WPC-89 Games (1990-1995) (SEE NOTES)
|
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 120 Pieces
|
|
|
Lamp Assortment Kit (#44,#555,#906,#89)
|
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #555 4-Element (SEE NOTES)
|
Part # LED4555
$1.25 & up |
|
|
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED044D
$1.19 & up |
|
|
LED- #555 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED555F
$1.29 & up |
|
|
LED - #89 Flashlamp
|
|
|
LED - #906 Flashlamp
|
|
|
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
|
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Backbox Lock With Key - 5/8 Inch - Single-Bitted (Black)
|
Part # LOCKSB58B
$5.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|