|
- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Rollover Switch Clear Adhesive Mylar Protector:
Price: $1.99 each
Status: In Stock
Part #: MYL13
Condition: New
|
|
|
For most makes and models! Clear self-adhesive Mylar protector for application around rollover lane switch openings on playfield. These help protect the edges of the playfield around the rollover switch opening from wear/tear, which can be common on older or heavily-used games. Especially handy for flipper return lanes and outlanes where balls drop from ramps overhead. Die-cut with smooth rounded curves makes installation easy and looks professional- practially invisible when installed.
Measurements: 2-1/2 inches overall length. 1 inch wide. Center slot: 1-3/4 inches by 3/16 inch.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
Most makes and models
|
Pop Bumper Clear Adhesive Mylar Protector
|
|
|
Pop Bumper Clear Non-Adhesive Mylar Protector - Gottlieb / Old Bally Style
|
|
|
Pop Bumper Clear Adhesive Mylar Protector - Gottlieb / Old Bally Style
|
|
|
Pop Bumper Clear Adhesive Mylar Protector (Bally/Midway)
|
|
|
Slingshot Bumper Clear Adhesive Mylar Protectors (2pcs)
|
|
|
Slingshot Bumper Clear Adhesive Mylar Protectors (2pcs)
|
|
|
Mylar Spot Protector - 1-1/16 Inch (27mm) Diameter
|
|
|
Mylar Spot Protector - 1-3/8 Inch (35mm) Diameter
|
|
|
Mylar Spot Protector - 1-5/8 Inch (41.5mm) Diameter
|
|
|
Mylar Spot Protector - 1-15/16 Inch (49mm) Diameter
|
|
|
Small Drop Target Mylar Protector - 1 Inch x 7/8 Inch (26 x 22mm)
|
|
|
Large Drop Target Mylar Protector - 1-3/8 Inch x 15/16 Inch (35 x 24mm)
|
|
|
Large Spinner Target Mylar Protector - 1-1/2 Inch x 1-1/4 Inch (38 x 31mm)
|
|
|
Round Target Mylar Protector - 1 Inch (25mm) Diameter
|
|
|
Mylar Spot Protector - 7/8 Inch (22mm) Square
|
|
|
Pinball Parts
