Click to Enlarge
|
Stellar Wars (Williams) Rubber Ring Kit:
Price: $19.56 each
Status: In Stock
Part #: KIT199
Condition: New
|
|
|
This 35-piece kit includes:- All playfield top-side rubber parts that come in contact with the ball (unless otherwise noted - see note below).
- Listing of kit parts and quantities used.
- Diagram showing locations of all parts supplied in the kit.
- Ring sizing chart for quick ring ID.
- Installation tips.
Kit Colors: Select above when ordering. Default colors are factory-original colors for this game (some colors may vary depending on availability).
Default colors for Stellar Wars: Rings: White  , Flippers: Red  , Plunger Tip: Black 
IMPORTANT NOTE:
Our rubber kits include (where applicable or otherwise noted) most or all ball-contact rubber parts on the top side of the playfield, including regular round rings, post bumpers, sleeve bumpers, mini post rings, flipper rings, ball shooter tip, and top arch rebound bumper. Rings for mini-posts on tops of plastics and ramps are also included for games that use them.
Our rubber kits do not includeIf you have a question about anything that may or may not be included in a kit, please ask before ordering.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
WILLIAMS: Stellar Wars
|
Stellar Wars (Williams) Paperwork Set (5pcs) (Reprint)
|
|
|
Stellar Wars (Williams) Operators Handbook (Reprint)
|
|
|
Williams Solid-State Flipper Maintenance Manual 16P-497-100 - March 1980 (USED)
|
Part # PM0463
$25.00 each |
|
|
Stellar Wars (Williams) Drop Target Set (10pcs)
|
Part # 03-7478-4-SW
$59.72 set |
|
|
Drop Target Reset Plate - 2/3-Bank Drop Targets (Earlier Design)
|
Part # 01-6452
$4.19 each |
|
|
Drop Target Guide - Plastic (Williams) (Reproduction)
|
Part # 03-7479
$11.59 each |
|
|
Ball Trough Return Rail - Upper - Single-Ball Games (Williams) (USED)
|
Part # 01-3570
$15.00 each |
|
|
Ball Trough Return Rail # 01-3570 - Single-Ball Games (Williams) (USED)
|
|
|
Ball Trough Return Rail # 01-3571-2 - Single-Ball Games (Williams) (USED)
|
|
|
Playfield Hanger Bracket 01-3536 - 2-3/8 x 3-7/16 x 3/4 (Bally/Williams) (USED)
|
|
|
Stop Bracket - Flipper Plunger / Link (Williams) (USED)
|
Part # 01-3203U
$2.50 each |
|
|
Bracket 01-2642-14 - Flipper EOS Switch Mounting (Williams) (USED)
|
|
|
Slingshot Bumper Kicker Arm and Tip Assembly A-7986 (Williams) (USED)
|
|
|
Flipper Base and Shaft Assembly (Williams) (USED)
|
Part # A-7087U
$4.00 each |
|
|
Standup Target - Round - Blue w/ Blue Bullseye Decal
|
Part # A-8286
$12.99 each |
|
|
Stellar Wars (Williams) ROM Chips
|
Part # ROMS324
$18.00 each |
|
|
Flipper ROM 2 Green (Williams) for Million Point Scoring (SEE NOTE)
|
Part # ROMS473
$18.00 each |
|
|
Rubber Cap Nut - White
|
Part # RINWCAP
$0.29 each |
|
|
Cap Nut - White Nylon
|
Part # HWR01-040600
$0.35 each |
|
|
Williams Solid-State Flipper Maintenance Manual 16P-497-100 - March 1980 (Reprint)
|
Part # PM0721
$21.74 each |
|
|
Decal - Coin Door Test Button (Williams)
|
|
|
Playfield Post - Blue Plastic 1-Inch Serrated
|
Part # C-951-4
$0.96 each |
|
|
Playfield Post - Blue Plastic 1-3/16 Inch Serrated
|
Part # C-952-4
$1.05 each |
|
|
Standup Target - Round - Red w/ Red Bullseye Decal - Front Mount
|
Part # A-9268
$12.99 each |
|
|
Pop Bumper Assembly (Williams SS) w/ SG-23-850-DC Coil
|
Part # POP_ASSY6
$58.32 each |
|
|
Pop Bumper Rebuild Kit - Most Makes/Models
|
Part # KIT_POPRBD1
$18.58 each |
|
|
Ball Return Assembly - Widebody Games (Williams)
|
Part # B-8039-1
$91.08 each |
|
|
Saucer Eject Kicker Assembly - Right (Williams)
|
Part # B-7472-5R
$55.37 each |
|
|
Slingshot Kicker Arm Assembly (Williams)
|
Part # B-8055
$23.95 each |
|
|
Coil - SFL-20-300/30-800-DC (Williams)
|
Part # SFL-20-300/30-800-DC
$21.99 each |
|
|
Flipper Rebuild Kit - Right Side Only - Williams Games 1967-1979
|
Part # FLKIT8-R
$36.04 each |
|
|
Flipper Bat and Shaft - 3-Inch Yellow - (Bally/Williams)
|
Part # 20-10110-6
$8.39 each |
|
|
Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE)
|
Part # RINRFLP
$0.89 each |
|
|
Fuse Kit - Williams Games L3-L7 (1977-1984) (SEE NOTES)
|
Part # FKWMSL3L7
$10.21 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 120 Pieces
|
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
Power Supply Input Connector Repair Kit - Bally / Williams / Data East
|
|
|
#44 Lamp (Box of 10)
|
|
|
#47 Lamp (Box of 100)
|
Part # LAM047C
$20.00 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #44 / #47 4-Element (SEE NOTES)
|
Part # LED4044
$1.25 & up |
|
|
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED044D
$1.19 & up |
|
|
LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED044F
$1.29 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
|
|
|
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch (Standard)
|
Part # LOCKHM78
$5.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|
Pinball Parts
