- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Flipper Rebuild Kit (w/ 2-leaf EOS Switch) - One Flipper - Bally Games 1975-1980 (SEE NOTES):
Price: $25.51 each
Status: In Stock
(8 Available)
Part #: FLKIT7A
Condition: New
|
|
|
Flipper rebuild kit for many Bally pinball games made between May 1975 and April 1980 (see game listing below).
This kit includes a 2-leaf end-of-stroke (EOS) switch that was typically used on earlier games in this era, and replaces discontinued Bally switch # ASW-A20-23. Please verify your game uses this type of switch before ordering. If your game uses a 3-leaf EOS switch, please order kit # FLKIT7 instead.
This kit includes replacement parts for 1 flipper (left or right).
Includes the following parts:- 1 coil plunger & link # A-3714-3
- 1 coil stop # A-613-127
- 1 coil sleeve # 03-7066
- 1 2-leaf end-of-stroke (EOS) switch # 03-7811 (replaces discontinued # ASW-A20-23, see note below)
- 2 EOS switch screws # HWR02-020506
- 1 coil plunger spring # 10-135
- 2 coil stop screws # HWR02-020804B
- 1 flipper bushing # C-649-53
- 1 metal washer for flipper crank # HWR03-041301A (replaces obsolete nylon washer)
- 1 original-style e-clip for flipper crank # ECLIP3/16HD
- 1 optional hairpin clip for flipper crank # 12-6227 (optional alternative to using above e-clip)
- Installation instructions
Flipper crank (left or right) is not included in this kit as it is not a wear part, but can be ordered separately if needed. Order # A-3711-2 (left) or A-3711-3 (right).
IMPORTANT NOTES ON EOS (End of Stroke) SWITCHES:- EOS switch in this kit is a 2-leaf switch. If your game uses a 3-leaf switch (common in later games), please order kit # FLKIT7 instead.
- This kit includes one (1) EOS switch. If the flipper assembly you are rebuilding has a 2nd (outer) EOS switch which controls an upper flipper, you may or may not need to replace that 2nd switch. If you do, it must be ordered separately (not included in kit because not all games that use this kit have upper flippers.) You can order part # ASW-A10-45 separately.
- EOS Switch Screws (2 per switch):
- 2-leaf (03-7811): Included in kit.
- 3-leaf (ASW-A20-34): Use # HWR02-020510-10PK (sold separately).
- 2-leaf (03-7811) with 2nd switch (ASW-A10-45) for upper flipper: Use # HWR02-020514 (sold separately).
- 3-leaf with 2nd switch: Use # HWR02-020516B (sold separately).
Additional Images: Click to Enlarge
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY (with 2-leaf EOS switch): Aladdin's Castle, Black Jack, Boomerang, Bow and Arrow, Capt. Fantastic (coin-op & home models), Dolly Parton, Eight Ball, Evel Knievel, Fireball (home model only), Flip Flop, Freedom, Future Spa, Galaxy Ranger, Hang Glider, Harlem Globetrotters, Hi Deal, Hokus Pokus, Kick Off, KISS, Lost World, Mata Hari, Night Rider, Nitro Ground Shaker, Old Chicago, Paragon, Playboy, Power Play (Bobby Orr's), Quarterback, Silverball Mania, Six Million Dollar Man, Skateball, Space Invaders, Star Trek, Strikes and Spares, Supersonic, Voltan
|
Flipper Rebuild Kit (w/ 3-leaf EOS Switch) - One Flipper - Bally Games 1975-1980 (SEE NOTES)
|
Part # FLKIT7
$29.95 each |
|
|
Flipper Adjustment Gauge (Bally / Williams)
|
Part # 03-8194
$0.59 each |
|
|
Flipper Assembly - Left (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES)
|
Part # ASE-1587-101-A
$90.99 each |
|
|
Flipper Baseplate Sub-Assembly (Bally) (SEE NOTE)
|
Part # A-613-41
$29.99 each |
|
|
Flipper Crank - RIGHT - Bally Games 1975-1980
|
Part # A-3711-2
$10.39 each |
|
|
Flipper Crank - LEFT - Bally Games 1975-1980
|
Part # A-3711-3
$10.39 each |
|
|
Flipper Bat and Shaft - 3-Inch White - Bally Games (Early)
|
Part # A-3994-5
$7.59 each |
|
|
Flipper Bat - 3-Inch White - Bally Games (Early)
|
Part # C-611-5
$3.49 each |
|
|
Yellow Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE)
|
Part # RINYFLP
$1.29 each |
|
|
Flipper Cap Set - 2-Inch - Left and Right w/Blue FLIPPER
|
Part # A-3739SET
$20.00 set |
|
|
1 Inch White Rubber Ring
|
|
|
1 Inch Black Rubber Ring
|
|
|
An Introduction to Bally Flipper Games Manual - 1st Edition (Reprint)
|
Part # PM0077
$29.08 each |
|
|
Flipper End-of-Stroke Switch - Williams Games 1980-1992
|
Part # 03-7811
$5.09 each |
|
|
Flipper End-of-Stroke Switch - Secondary - Dual Flippers (Bally)
|
Part # ASW-A10-45
$11.19 each |
|
|
Washer - Tension - Coil / Solenoid 1/2in ID
|
Part # 269-5002-00
$0.91 each |
|
|
Fuse Kit - Bally Electro-Mechanical Games (up to 1977) (SEE NOTES)
|
Part # FKBLYEM
$7.54 each |
|
|
Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES)
|
Part # FKBLYSS
$9.74 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Coil Stop - Flipper - Early Models (Bally)
|
Part # A-613-127
$7.49 each |
|
|
Spring - Coil Plunger Return
|
|
|
Screw - #8-32 x 3/8 (10-PACK) Phillips Pan Head (PPH) Machine Thread (MS) Black
|
Part # HWR02-020804B-10PK
$2.30 set/10 |
|
|
Flipper Bushing - Large - Bally Games (Early)
|
Part # C-649-53
$2.19 each |
|
|
E-Clip - 3/16-Inch (10-PACK)
|
Part # ECLIP3/16-10PK
$2.20 set/10 |
|
|
Retainer Clip (6-PACK) - Hairpin - For 3/16 Inch Dia. Shafts/Studs (Bally/Williams)
|
Part # 12-6227-6PK
$1.74 set/6 |
|
|
Flat Washer - 0.265 in ID x 0.500 in OD x 0.015 in thick (28ga)
|
Part # HWR03-041301A
$0.75 each |
|
|
Washer - Nylon - Flipper Crank (Bally) (Replacement - SEE NOTE)
|
Part # P-801-590
$0.29 each |
|
|
Rubber Assortment Kit - White (50pcs)
|
Part # KIT000W
$29.70 each |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
#44 Lamp (Box of 10)
|
|
|
#47 Lamp (Box of 100)
|
Part # LAM047C
$19.99 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #44 / #47 4-Element (SEE NOTES)
|
Part # LED4044
$1.25 & up |
|
|
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED044D
$1.19 & up |
|
|
LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED044F
$1.29 & up |
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
|
|
|
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch (Standard)
|
Part # LOCKHM78
$5.99 each |
|
|
Game Lock With Keys - 1-1/8 Inch (Long) - Single-Bitted
|
Part # LOCKSB118
$6.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|