Action Pinball - E-281-7 - Speaker - 4-inch 8 Ohms - 3-1/4-inch Hole Spacing (Bally) (SEE NOTES)

Pinball Parts

Action Pinball - Salt Lake City, UT, USA - Contact Us

Quick Links: - Home Page
- Game Parts & Supplies
- Games for Sale
- Ordering Info
- Technical Articles
- Game Service & Repair
- Contact Us

- US Shipping Only. International customers can order using a US forwarding service. (more info)

Click to Enlarge

Speaker - 4-inch 8 Ohms - 3-1/4-inch Hole Spacing (Bally) (SEE NOTES):

Price: $19.99 each
Status: In Stock
(15 Available)

Order:

Part #: E-281-7
Condition: New

Replacement main cabinet speaker for many older Bally electronic solid-state (SS) games (see game listing below).

4-1/4-inch overall width (4-inch diameter cone). 8 ohms. 40 watts power handling (RMS), 70 watts max.

Replaces original factory 8-ohm 8-watt speaker (Bally part # E-281-7) and earlier part # E-281-6.

MEASUREMENTS: Screw holes are 3-1/4 inches apart side-to-side, 4-1/2 inches apart diagonally. Measures 4-1/4 inches overall width. Cone diameter is 4 inches. 2-1/8 inches overall height including magnet.

NOTES:

This is an aftermarket replacement speaker which may differ in appearance and exact size from original factory part.
May require some adjustment for proper fit, especially in older games, including possible relocation of mounting screws/studs.

Additional Images:
Click to Enlarge

NOTE: No returns on Electronics - all sales final.

Ask a question about this item

Fits The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Dolly Parton, Flash Gordon (uses 2 8-ohm speakers in parallel), Frontier, Future Spa, Harlem Globetrotters, Hotdoggin', KISS (Bally), Lost World, Mystic, Nitro Ground Shaker, Paragon, Playboy (Bally), Rolling Stones (Bally), Silverball Mania, Six Million Dollar Man, Skateball, Star Trek (Bally), Supersonic, Viking (Bally), Voltan, Xenon (unconfirmed)

One-Rate Shipping in U.S.!

Screw - #8 x 5/8 (10-PACK) Phillips Pan Head (PPH) Wood Thread (SMS) Part # HWR02-010808-10PK $1.90 set/10	Screw - #8 x 1/2 (10-PACK) Phillips Round Head (PRH) Wood Thread (SMS) Part # HWR02-010806-10PK $1.70 set/10	Star Lock Washer - #8 (10-PACK) Part # HWR03-020800-10PK $1.80 set/10	Speaker - Oval 8-Ohm (Bally) Part # E-281-9	Speaker - 6-inch 4-Ohm (Bally) (SEE NOTE) Part # E-281-11
Speaker Grille - Main Cabinet - Black Plastic 7 x 7 Inch (Data East / Sega / Stern) Part # 545-5072-03 $6.99 each	Soldering Kit - 30-Watt General Purpose (4 pcs) Part # SI-30-KIT $24.49 set	Fin Shank Screw/Stud - 6-32 x 1-1/4 Inch (Zinc) Part # 237-5883-00 $1.39 each	Potentiometer- 1K Ohm 200mW Rotary Linear Taper - 6mm Single-Turn Part # POT1K1 $2.49 each	Potentiometer - 5K Ohm - Small 15mm dia x 15mm Shaft Part # POT5K1 $4.99 each
Bally Games FO-560-3 Service / Repair Manual (Reprint) (SEE NOTES) Part # PM0078 $41.50 each	Bally Theory of Operation Manual FO-601-2 (May 1982) (Reprint) Part # PM0080 $23.50 each	Bally U6 ROM Chip 720-3532 v9.0 (Free Play / 6 or 7 Digit) - 2732 EPROM (SEE NOTES) Part # ROMS532 $18.00 each	Alltek Ultimate MPU Game ROM Part # ROMS474 $21.00 each	Varistor Info Card for Cabinet (Bally) Part # PDG460 $3.50 each
Factory Inspection Card for Cabinet (Bally) Part # PDG461 $3.50 each	Eight Ball Deluxe (1981 Bally) Game Manual and Schematics (Reprint) Part # PM0710 $34.00 each	Flipper Rebuild Kit (w/ 3-leaf EOS Switch) - One Flipper LEFT or RIGHT - Bally Games 1975-1980 (SEE NOTES) Part # FLKIT7 $29.88 each	Flipper Rebuild Kit - Left Side Only - Bally Games 1980-1988 Part # FLKIT6-L $45.70 each	Flipper Assembly - Left (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES) Part # ASE-1587-101-A $90.99 each
Flipper Assembly - Linear - Right (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES) Part # ASE-1587-111-A $116.21 each	Flipper Bat and Shaft - 3-Inch White - Bally Games (Early) Part # A-3994-5 $8.39 each	Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE) Part # RINRFLP $0.89 each	Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES) Part # FKBLYSS $22.68 each	Fuse Puller Tool - For Glass Fuses Part # FPT1 $4.99 each
Circuit Breaker Testing Set (6pcs) Part # CBSET $27.49 set	Digital Multi-Meter / Multi-Tester With Leads Part # METER02 $12.99 each	Heat Shrink Tubing Kit - 120 Pieces Part # HS_KIT $7.99 each	DeoxIT Anti-Oxidant Compound D100L (2cc) Part # D100L $6.99 each	C23 Capacitor Replacement Kit - Bally/Stern Games (1977-1985) Part # KITC23CAP $10.77 each
6-Digit LED Score Display (Vintage Bally/Stern) Part # PS6D $83.99 each	#44 Lamp (Box of 10) Part # LAM044 $5.99 box	#555 Lamp (Box of 100) Part # LAM555C $19.99 box	Light Bulb Extractor Tool Part # LAMPTOOL $0.89 each	LED - #44 / #47 3-Element (SEE NOTES) Part # LED3044 $0.99 & up
LED - #555 4-Element (SEE NOTES) Part # LED4555 $1.29 & up	LED - #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES) Part # LED044D $1.19 & up	LED - #555 Flexible-Lead (Non-Ghosting) (SEE NOTES) Part # LED555F $1.29 & up	LED - #89 Flashlamp Part # LED089 $1.59 each	LED - #906 Flashlamp (SEE NOTES) Part # LED906 $1.59 each
Pin Ball - 1-1/16 Inch Diameter (Standard Size) Part # PB116 $2.99 each	Novus Polish Set - #1 #2 #3 Part # NOV123 $30.37 set	Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz Part # MOTHERS_WAX $14.49 each	Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games) Part # PGDC $29.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike Part # LOCKDB78A $5.99 each
Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE) Part # LOCKDB78 $9.99 each	Keyless Game Lock - 7/8 Inch (Standard) Part # LOCKHM78 $5.99 each	Game Lock With Keys - 1-1/8 Inch (Long) - Single-Bitted Part # LOCKSB118 $6.99 each	Car License Plate Frame - Playing Pinball Part # LICFRAME1 $7.99 each

Back to Home Page

This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.