Click to Enlarge
|
Leaf Switch w/ Diode - Early Drop Targets (Bally) (SEE NOTES):
Price: $12.59 each
Status: In Stock
(10 Available)
Part #: ASE-2911-17
Condition: New
|
|
|
Leaf switch with diode and nylon insluator for drop target banks in some early Bally electronic solid-state (SS) games (see notes and game listing below). This switch assembly is comprised of leaf switch sub-assembly # ASW-A1-157, and diode # E-587-14.
This style switch mounts on the bottom side of the drop target bank and registers when the target is in the down position.
Proper operation requires correct wiring with respect to diode polarity. Compare to another switch for reference if available (installation instructions are not included).
NOTES:- This switch is for drop target banks in some early Bally solid-state games (see game listing below).
- This switch mounts on the BOTTOM of the drop target assembly.
- Later Bally games take switch # ASW-A1-168 instead, which mounts on the BACK of the assembly.
- This switch is listed as Bally part # AS-2911-17 in the 1978 Bally Parts Catalog, but is the same as ASE-2911-17 ("E" indicates electronic model games).
- Please make sure your game utilizes this style switch before ordering, as electronic parts are not returnable.
NOTE: No returns on Electronics - all sales final.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Evel Knievel (electronic), Mata Hari (electronic), Night Rider (electronic), Power Play
|
Leaf Switch w/ Diode - Late Drop Targets (Bally) (SEE NOTES)
|
Part # ASW-A1-168
$21.49 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Screw - #5-40 x 3/8 (10-PACK) Phillips Pan Head (PPH) Machine Thread (MS)
|
Part # HWR02-020504-10PK
$1.80 set/10 |
|
|
Drop Target Set - White w/ Red Bullseye Decal - Narrow Top 4pcs (Bally)
|
Part # A-3773-3D4
$26.36 set |
|
|
Mata Hari (Electronic) (Bally) Game Manual w/ Schematics (Reprint) (SEE NOTE)
|
Part # PM0261
$24.50 each |
|
|
Bally Games FO-560-3 Service / Repair Manual (Reprint)
|
Part # PM0078
$34.62 each |
|
|
Bally Theory of Operation Manual FO-601 (June 1978) (Reprint)
|
Part # PM0079
$18.06 each |
|
|
Bally Service Bulletins Collection (Aug. 1978) (Reprint)
|
Part # PM0449
$23.12 each |
|
|
Mata Hari (Bally) Rubber Ring Kit
|
Part # KIT024
$15.84 each |
|
|
Mata Hari (Bally) Left Slingshot Bumper Plastic (USED)
|
|
|
Coil Plunger - Knocker / Chime / Bell - 2-1/2-Inch (Williams)
|
|
|
Pop Bumper Skirt - White
|
Part # 03-6035-5
$0.99 each |
|
|
Pop Bumper Skirt - Translucent Off-White NOS (Bally / Midway)
|
Part # C-790-5
$8.00 each |
|
|
Pop Bumper Cap - Red Starburst w/ Gold Lettering - 1000 Points When Lit (Bally)
|
Part # A-3713-29
$11.39 each |
|
|
Pop Bumper Coil Sub-Assembly
|
Part # A-9415-2
$38.28 each |
|
|
Pop Bumper Coil Sub-Assembly (Bally) (USED)
|
Part # A-9415-2U
$19.00 each |
|
|
Pop Bumper Top Assembly - Older/Vintage Games
|
Part # ASE-2222-4
$21.22 each |
|
|
Pop Bumper Rebuild Kit - Vintage Games - Most Makes/Models
|
Part # KIT_POPRBD2
$20.18 each |
|
|
Pop Bumper Assembly (Bally SS) w/ AE-26-1200 Coil
|
Part # POP_ASSY2
$57.32 each |
|
|
Pop Bumper Coil Stop Bracket and Plunger Assembly (Bally)
|
|
|
Lane Guide - Red 2-Sided 2-1/8 Inch w/ Bally Logo (Bally)
|
Part # C-935-1
$6.95 each |
|
|
Protector - Ball Shooter Lane (Bally) (SEE NOTE)
|
|
|
Ball Shooter Lane Support Bracket (USED)
|
|
|
Saucer Hole Kicker Assembly - Right (Bally)
|
|
|
Saucer Hole Kicker Assembly AS-428-40 - Right (Bally) (USED)
|
|
|
Mata Hari (Bally) Game ROM Chips U2/U6 (2pcs) (SEE NOTES)
|
Part # ROMS199
$36.00 set |
|
|
Alltek Ultimate MPU Game ROM
|
Part # ROMS474
$21.00 each |
|
|
Flipper Assembly - Left (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES)
|
Part # ASE-1587-101-A
$90.99 each |
|
|
Flipper Bat and Shaft - 3-Inch White - Bally Games (Early)
|
Part # A-3994-5
$7.59 each |
|
|
Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE)
|
Part # RINRFLP
$0.89 each |
|
|
Flipper Rebuild Kit (w/ 3-leaf EOS Switch) - One Flipper - Bally Games 1975-1980 (SEE NOTES)
|
Part # FLKIT7
$29.95 each |
|
|
Flipper EOS Switch Bracket (Bally)
|
Part # P-137-3
$10.09 each |
|
|
Varistor Info Card for Cabinet (Bally)
|
|
|
Factory Inspection Card for Cabinet (Bally)
|
|
|
Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES)
|
Part # FKBLYSS
$9.74 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 120 Pieces
|
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
C23 Capacitor Replacement Kit - Bally/Stern Games (1977-1985)
|
Part # KITC23CAP
$10.77 each |
|
|
6-Digit LED Score Display (Vintage Bally/Stern)
|
|
|
#44 Lamp (Box of 10)
|
|
|
#47 Lamp (Box of 100)
|
Part # LAM047C
$20.00 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED Conversion Adapter Kit for Bally / Stern Main Lamp Driver Board (SEE NOTES)
|
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #44 / #47 4-Element (SEE NOTES)
|
Part # LED4044
$1.25 & up |
|
|
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED044D
$1.19 & up |
|
|
LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED044F
$1.29 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
|
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Game Lock With Keys - 1-1/8 Inch - Single-Bitted
|
Part # LOCKSB118
$6.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|