Action Pinball - A-9268 - Standup Target - Round - Red w/ Red Bullseye Decal

Pinball Parts

Action Pinball - Salt Lake City, UT, USA - Contact Us

Quick Links: - Home Page
- Game Parts & Supplies
- Games for Sale
- Ordering Info
- Technical Articles
- Game Service & Repair
- Contact Us

- US Shipping Only. International customers can order using a US forwarding service. (more info)

Click to Enlarge

Standup Target - Round - Red w/ Red Bullseye Decal - Front Mount:

Price: $12.99 each
Status: In Stock
(12 Available)

Order:

Part #: A-9268
Condition: New

Modern replacement target assembly for obsolete Williams # A-9268. Includes red round standup target switch assembly with front mounting bracket, switch diode, and red/white bullseye decal on target face. Target face is 1-inch diameter.

FITMENT NOTES: This is a modern Bally/Williams style replacement target. Target may sit slightly lower (about 3/32-inch (2mm)) when used on older games. If replacing targets on older games, you might consider replacing all targets in the bank at the same time, to retain uniform alignment.

This target features a bullseye design decal on the target face. The design is not hot-stamped like original targets were 40+ years ago.

Mounting bracket has 2 screw holes that are parallel to the target face. Some older/original targets may use a mounting bracket that has screw holes that are perpendicular to the target face. If replacing one of these targets, you will need to drill new screw holes in order to properly mount this target.

Requires two screws for mounting (not included- use our part # HWR02-030606-10PK). Wires must be connected with correct polarity- if installing in a late-model Bally or Williams game, green wire(s) will go to empty solder lug, and white wire(s) will connect to solder lug with diode's anode (non-banded) end.

Ask a question about this item

Fits The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
WILLIAMS: Disco Fever, Firepower, Joust, Laser Ball, Laser Cue, Phoenix (1978), Space Shuttle, Stellar Wars, Time Warp, more

One-Rate Shipping in U.S.!

Standup Target - Round - Red w/ Red Bullseye Decal - Rear Mount Part # A-9268-R $16.57 each	Standup Target - Round - Blue w/ Blue Bullseye Decal Part # A-8286 $12.99 each	Standup Target - Round Red - Front Mount Part # A-14691-4 $11.99 each	Red Bullseye Target Decal (Williams) Part # PDG332 $1.00 each	Standup Target - Round Blue - Front-Mount Part # A-14691-1 $11.99 each
Standup Target - Round Green - Front Mount Part # A-14691-2 $11.99 each	Standup Target - Round White - Front Mount Part # A-14691-5 $11.99 each	Standup Target - Round Yellow - Front Mount Part # A-14691-6 $11.99 each	Standup Target - Round Orange - Front Mount Part # A-14691-15 $11.99 each	Target Backing Foam Pad - Gray 3/8 x 3/4 Inch Part # 23-6534-9 $0.30 each
Screw - #6 x 1/2 (10-PACK) Hex Washer Head (HWH) Wood Thread (SMS) Part # HWR02-030606-10PK $1.50 set/10	Red Bullseye Target Decal (Williams) Part # PDG332 $1.00 each	Blue Bullseye Target Decal (Williams) Part # PDG333 $1.00 each	Decal - Blue and Red Bullseye Target w/ Center Hole Part # PDG368 $1.00 each	Round Target Decal - Silver Hologram Part # PDG264 $0.75 each
Round Target Decal - Amber Hologram Part # PDG265 $0.75 each	Flipper ROM 2 Green (Williams) for Million Point Scoring (SEE NOTE) Part # ROMS473 $18.00 each	Rubber Cap Nut - White Part # RINWCAP $0.29 each	Cap Nut - White Nylon Part # HWR01-040600 $0.35 each	Williams Solid-State Flipper Maintenance Manual 16P-497-100 - March 1980 (Reprint) Part # PM0721 $22.74 each
Decal - Coin Door Test Button (Williams) Part # PDG361 $4.50 each	Playfield Post - Blue Plastic 1-Inch Serrated Part # C-951-4 $0.96 each	Playfield Post - Blue Plastic 1-3/16 Inch Serrated Part # C-952-4 $1.05 each	Standup Target - Round - Red w/ Red Bullseye Decal - Front Mount Part # A-9268 $12.99 each	Pop Bumper Assembly (Williams SS) w/ SG-23-850-DC Coil Part # POP_ASSY6 $58.32 each
Pop Bumper Rebuild Kit - Most Makes/Models Part # KIT_POPRBD1 $18.58 each	Ball Return Assembly - Widebody Games (Williams) Part # B-8039-1 $91.08 each	Saucer Eject Kicker Assembly - Right (Williams) Part # B-7472-5R $55.37 each	Slingshot Kicker Arm Assembly (Williams) Part # B-8055 $23.95 each	Coil - SFL-20-300/30-800-DC (Williams) Part # SFL-20-300/30-800-DC $21.99 each
Flipper Rebuild Kit - Right Side Only - Williams Games 1967-1979 Part # FLKIT8-R $36.14 each	Flipper Bat and Shaft - 3-Inch Yellow - (Bally/Williams) Part # 20-10110-6 $8.39 each	Red Flipper Rubber Ring - Large - For 3 Inch Flippers (SEE NOTE) Part # RINRFLP $0.89 each	Fuse Kit - Williams Games L3-L7 (1977-1984) (SEE NOTES) Part # FKWMSL3L7 $10.21 each	Fuse Puller Tool - For Glass Fuses Part # FPT1 $4.99 each
Circuit Breaker Testing Set (6pcs) Part # CBSET $27.49 set	Digital Multi-Meter / Multi-Tester With Leads (Color May Vary) Part # METER02 $12.99 each	Soldering Kit - 30-Watt General Purpose (4 pcs) Part # SI-30-KIT $24.29 set	Heat Shrink Tubing Kit - 120 Pieces Part # HS_KIT $7.99 each	DeoxIT Anti-Oxidant Compound D100L (2cc) Part # D100L $6.99 each
Power Supply Input Connector Repair Kit - Bally / Williams / Data East Part # CN1SET $24.99 set	#44 Lamp (Box of 10) Part # LAM044 $4.59 box	#47 Lamp (Box of 100) Part # LAM047C $19.99 box	Light Bulb Extractor Tool Part # LAMPTOOL $0.89 each	LED- #44 / #47 3-Element (SEE NOTES) Part # LED3044 $0.99 & up
LED- #44 / #47 4-Element (SEE NOTES) Part # LED4044 $1.25 & up	LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES) Part # LED044D $1.19 & up	LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES) Part # LED044F $1.29 & up	Pin Ball - 1-1/16 Inch Diameter (Standard Size) Part # PB116 $2.99 each	Novus Polish Set - #1 #2 #3 Part # NOV123 $28.17 set
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz Part # MOTHERS_WAX $14.49 each	Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games) Part # PGDC $29.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted - Keyed-Alike Part # LOCKDB78A $5.99 each	Game Lock With Keys - 7/8 Inch (Standard) - Double-Bitted Keyed-Alike # 7500 Key (SEE NOTE) Part # LOCKDB78 $9.99 each	Keyless Lock - 7/8 Inch (Standard) Part # LOCKHM78 $5.99 each
Cabinet Leg Protector Set w/ Screws - Metal (4pcs) Part # 535-0599-00 $19.99 set	Car License Plate Frame - Playing Pinball Part # LICFRAME1 $7.99 each

Back to Home Page

This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.