|
- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Eddy Sensor PC Board (Bally/Williams) (USED) (SEE NOTES):
Price: $75.00 each
Status: Out of Stock
Part #: A-18543-1
Condition: Used
|
|
|
Same as A-18543.1-1. Used/working original eddy sensor PC board used on some Bally and Williams games. Used for outlane sensors on Theatre of Magic and inlane (flipper return lane) sensors on Star Trek: The Next Generation.
Measures 3 x 1-1/4 inches. Includes mounting standoffs. Mounting screws sold separately. Used board in excellent condition, tested and fully working.
INSTALLATION NOTE: After installing, adjust the potentiometer on the board until the LED just goes out. LED ON = ball on sensor, switch activated. LED OFF = no ball on sensor, switch not activated. Potentiometer will require re-calibration periodically due to design. This means that when the eddy switch stops working, raise the playfield, and re-adjust the potentiometer to restore operation.
INTERCHAGEABILITY NOTE: This # A-18543-1 board is NOT directly interchangeable with # A-18543-2. The difference between the two is the R1 resistor. A-18543-1 uses a 4.7k resistor for R1. The A-18543-2 uses a 2k resistor for R1. These boards can be modified one-for-the-other by changing out the R1 resistor.
NOTE: No returns on Electronics - all sales final.
NOTE: No warranty or returns on used items. Used items are sold as-is, and all sales are final.
Ask a question about this item
Fits The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Theatre of Magic (outlanes only)
WILLIAMS: Star Trek: The Next Generation (inlanes only)
|
Copyright © 2003-2025, Action Pinball & Amusement, LLC, All Rights Reserved.
This website and all included content including, but not limited to, text, images, wording, design, and layout, are Copyright © Action Pinball & Amusement, LLC, All Rights Reserved, and protected under the Digital Millennium Copyright Act (DMCA) and US Government Copyright law (title 17, U.S. Code, 1976 Copyright Act, Section 106). Use or distribution of any content from this website on another website or in any other manner without express written permission of Action Pinball & Amusement, LLC, is expressly forbidden and will be prosecuted under the provisions of US Government Copyright Law.
Pinball Parts
