|
- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Ribbon Cable - 34-pin 22-inch 4-connector:
Price:
Status: Out of Stock - Discontinued more info...
Part #: 5795-13018-00
Condition: New
|
|
|
Discontinued- use # 5795-13018-01 as replacement.- 4 connectors at 4, 10, and 8 inch intervals.
- 34 pins per connector.
- 22 inch length.
- Connectors face same direction when cable laid flat (u-shape).
Used on most Bally/Williams WPC pinball games. Runs between MPU (J202), Flipper Board (J903), Sound Board (J506), and Display Controller Board (J601).
NOTE: Twilight Zone manual has this cable, and cable # 5795-10938-14 swapped. This cable has 4 connectors. The 5795-10938-14 cable has 2 connectors.
Common to have to replace this cable when connections in the housings become intermittent from oxidation and/or corrosion from exposure to humidity over long periods (such as on games re-imported from overseas that have been exposed to moisture during shipping from sea water mist). Bad ribbon cable connections can cause erratic game operation- symptoms from no-boot, to flippers/sound cutting out, display issues, sporadic unexplained freak outs, and more. If your game has these symptoms, it may need new ribbon cables.
We strongly recommend using DeOxit anti-oxidant/lubricant compound on the pins that this ribbon cable connects to, to help prevent oxidation and add lubrication that reduces stress on circuit boards when connectors are removed/reseated.
NOTE: No returns on Electronics - all sales final.
Ask a question about this item
Fits The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Addams Family, Black Rose, Creature From the Black Lagoon, Doctor Who
MIDWAY: Hot Shots (basketball)
WILLIAMS: Dracula (Williams), Fish Tales, Getaway High Speed II, White Water
|
Pinball Parts
