- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Rubber Grommet - Chime Bar (SEE NOTES):
Price: $1.19 each
Status: In Stock
(102 Available)
Part #: 23-6330
Condition: New
|
|
|
Black rubber grommet for chime bar (2 per bar), as found in most makes and models of games that have chimes for scoring.
Replaces Bally # R-111-7 (see note below), R-111-39, Williams # 23-6330 and 23A-6330, and others.
Measurements: | A: 7/16 inch B: 1/8 inch C: 3/16 inch D: 9/16 inch E: 3/8 inch | NOTES:- This is an aftermarket replacement part and may differ slightly in measurements from factory original parts made decades ago. Please verify measurements above before ordering.
- Bally Nip-It: Replaces # R-111-7 on ball grabber unit (Balligator). 4 of these grommets are required on the grabber unit mounting plates. They will fit in place of original R-111-7 (now obsolete), but will need to have the inner diameter slightly enlarged by drilling-out with a 7/32-inch drill bit, in order to accommodate the spacers that fit inside the grommets. We recommend replacing the original accompanying jam nuts and washers with #8 nylock nuts and washers for simplicity, and easier removal/replacement.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Aladdin's Castle, Blackjack, Boomerang, Bow and Arrow, Capt. Fantastic, Eight Ball, El Toro, Evel Knievel, Fireball, Flicker (1975) (Bally), Hang Glider, Knockout, Mata Hari, Monte Carlo, Night Rider, Nip-It, Power Play, Wizard!, more
WILLIAMS: Aztec, Big Deal (1977), Darling, Doodle Bug, Honey, Little Chief, Love Bug, Olympic Hockey, OXO, Solids 'N Stripes, Skylab, Space Mission, Space Odyssey, Spacelab, Super Star, more
|
Rebuild Kit - 3-Tone Chime Assembly (Williams)
|
Part # C-7507-1-KIT
$16.69 each |
|
|
Coil Sleeve - Flanged - 1-7/8 Inch x 7/16 Inch ID (Standard)
|
Part # 03-7067
$0.79 each |
|
|
Coil - CC-31-2000 (Bally)
|
Part # CC-31-2000
$26.19 each |
|
|
Coil - CJ-31-2000 (Bally)
|
Part # CJ-31-2000
$25.19 each |
|
|
Coil - CN-31-2000 (Bally)
|
Part # CN-31-2000
$26.19 each |
|
|
Williams Introduction to Coin Operated Amusement Games Manual (Reprint)
|
Part # PM0461
$28.18 each |
|
|
An Introduction to Bally Flipper Games Manual - 2nd Edition (Reprint)
|
Part # PM0649
$35.92 each |
|
|
Nip-It (Bally) Game Manual and Schematic Wiring Diagrams (3pcs) (Reprint)
|
|
|
Nip-It (Bally) Rubber Ring Kit
|
Part # KIT573
$15.06 each |
|
|
Flipper Rebuild Kit - Left Side Only - Williams Games 1967-1979
|
Part # FLKIT8-L
$36.04 each |
|
|
Flipper Bat and Shaft - 3-Inch Yellow - (Bally/Williams)
|
Part # 20-10110-6
$8.39 each |
|
|
Red Flipper Rubber Ring - Large
|
Part # RINRFLP
$0.89 each |
|
|
Flipper Rebuild Kit - LEFT and RIGHT - Most Bally Games 1963-1975
|
Part # FLKIT13
$128.74 each |
|
|
Flipper Cap Set - 2-Inch - Left and Right w/Blue FLIPPER
|
Part # A-3739SET
$20.00 set |
|
|
Fuse Kit - Bally Electro-Mechanical Games (up to 1977) (SEE NOTES)
|
Part # FKBLYEM
$7.54 each |
|
|
Fuse Kit - Williams Electro-Mechanical Games (through 1977) (SEE NOTES)
|
Part # FKWMSEM
$7.66 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 120 Pieces
|
|
|
Plastone Flexible Switch Contact File (Flexstone)
|
Part # PLASTONE
$5.09 each |
|
|
Emery Board Switch Contact File
|
Part # EMERYBD
$0.79 each |
|
|
Leaf Switch Adjustment Tool
|
Part # SW_TOOL
$6.99 each |
|
|
Burnishing Tool for Switch Contacts
|
Part # BURNTOOL
$7.49 each |
|
|
#44 Lamp (Box of 10)
|
|
|
#47 Lamp (Box of 100)
|
Part # LAM047C
$20.00 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED Conversion Adapter Kit for Bally / Stern Main Lamp Driver Board (SEE NOTES)
|
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #44 / #47 4-Element (SEE NOTES)
|
Part # LED4044
$1.25 & up |
|
|
LED- #44 / #47 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED044D
$1.19 & up |
|
|
LED- #44 / #47 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED044F
$1.29 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
|
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|