- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
#8-32 x 2-1/16 Inch Playfield Post Machine-Thread Stud (6-32 top thread) (SEE NOTE):
Price: $3.79 each
Status: In Stock
(9 Available)
Part #: 02-4424-1
Condition: New
|
|
|
Stud for playfield plastic posts. #8-32 thread on bottom, #6-32 thread on top. Top thread measures 1/4 inch tall. 2-1/16-inch overall length.
#8-32 is the larger size (larger diameter) of the two sizes of this part found on games over the years. Some later-model Bally/Williams games (late 1980s and up) may take this larger #8-32 size stud. Earlier games will often take smaller #6-32 size studs.
On top threads, install #6-32 nylock nuts, nylon cap nuts, or rubber cap nuts, to hold down plastics and other mounting parts.
Install with #8-32 t-nuts for securing under playfield.
NOTE: This is an aftermarket replacement which has a thicker/taller hex portion than factory-original parts. Hex portion on this replacement stud measures 1/8 inch thick. Original was 1/16 inch thick (compare to additional image below). Please take this into consideration for your application before ordering.
Additional Images: Click to Enlarge
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Addams Family Gold, Black Rose, Bugs Bunnys Birthday Ball, Corvette, Creature From the Black Lagoon, Doctor Who, Dr. Dude, Gilligans Island, Harley Davidson (Bally), Indianapolis 500, Judge Dredd, Party Zone, Popeye Saves the Earth, Radical!, Safe Cracker, Scared Stiff, Shadow, Theatre of Magic, WhoDunnit, World Cup Soccer '94
WILLIAMS: Demolition Man, Diner, Dirty Harry, Fish Tales, Flintstones, Funhouse, Getaway High Speed II, Hurricane, Indiana Jones (Williams), Machine: Bride of PinBot, No Fear, Riverboat Gambler, Road Show, Star Trek: The Next Generation, Tales of the Arabian Nights, Terminator 2, Whirlwind, White Water
|
#8-32 x 2-1/16 Inch Playfield Post Machine-Thread Stud (8-32 top thread)
|
Part # 02-4424-2
$4.99 each |
|
|
#8-32 x 2-3/8 Inch Playfield Post Machine-Thread Stud (#8-32 x 5/8 inch top thread)
|
Part # 02-4425-1
$4.49 each |
|
|
Stud - Playfield Post - #6-32 x 1-1/2 Inch Machine Thread
|
Part # 530-5012-02
$1.59 each |
|
|
Stud - Playfield Post - #6 x 1-1/2 Inch Wood Thread
|
Part # 530-5010-02
$1.79 each |
|
|
Playfield Post Machine Thread Stud - 6-32 Bottom - 8-32 x 5/8 Inch top thread
|
Part # 530-5008-00
$1.49 each |
|
|
#8-32 x 2-3/4 Inch Playfield Post Machine-Thread Stud (#8-32 x 5/8 inch top thread)
|
Part # 02-4425-3
$4.59 each |
|
|
Screw - #6-32 x 1-3/4 (6-PACK) Phillips Pan Head (PPH) Machine Thread (MS)
|
Part # HWR02-020626-6PK
$1.32 set/6 |
|
|
Screw - #8-32 x 1-3/4 (6-PACK) Phillips Pan Head (PPH) Machine Thread (MS)
|
Part # HWR02-020826-6PK
$1.50 set/6 |
|
|
Screw - #6 x 1-3/4 (5-PACK) Phillips Pan Head (PPH) Wood Thread (SMS)
|
Part # HWR02-010626-5PK
$1.50 set/5 |
|
|
Screw - #8 x 1-3/4 (5-PACK) Phillips Pan Head (PPH) Wood Thread (SMS)
|
Part # HWR02-010826-5PK
$1.30 set/5 |
|
|
Playfield Bumper Sleeve Post #6-32 Top Hole / #10-32 Stud Base (Bally/Williams)
|
Part # 02-4659-1
$5.09 each |
|
|
Post - Transparent Red - Single-Ring
|
Part # 03-8319-9
$0.65 each |
|
|
Plastic Post - Transparent Light Blue - Double-Ring
|
Part # 03-8247-30
$0.99 each |
|
|
Post - White Opaque 1 Inch - Single-Ring
|
Part # C-11561
$0.96 each |
|
|
Post - Narrow - Transparent Blue 1-3/16 Inch Tall
|
Part # 03-8365-10
$1.29 each |
|
|
Blue Threadlocker Compound - Semi-Permanent
|
Part # PTEX242
$3.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Wire Nut - Small - 16-20ga
|
Part # WIRENUT1
$0.39 each |
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
18 Inch Test Lead Set (10pcs)
|
Part # TESTLEADS10
$7.99 each |
|
|
Heat Sink Compound - 5g Tube
|
|
|
Addams Family (Bally) Rubber Ring Kit
|
Part # KIT001
$29.06 each |
|
|
#44 Lamp (Box of 10)
|
|
|
#555 Lamp (Box of 100)
|
Part # LAM555C
$20.00 box |
|
|
Lamp Assortment Kit (#44,#555,#906,#89)
|
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #555 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED555D
$1.19 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Playfield Glass Dust Cover - Black - 20-1/2 x 41-1/2 In. (Standard Width Games)
|
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Backbox Lock With Key - 5/8 Inch - Single-Bitted (Black)
|
Part # LOCKSB58B
$5.99 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$7.99 each |
|
|