Scared Stiff (Bally) ROM Chips
| 
25-Amp Fuse - Slow-Blow (MDL) 1-1/4 x 1/4 Inch
$0.80 each | 
Car License Plate Frame
$5.00 each | 
Fiber Yoke - Pop Bumper (Bally/Williams)
$1.19 each | 
Knock Out (Gottlieb) Rubber Ring Kit
|
Escape From the Lost World (Bally) Rubber Ring Kit
| 
Valencia (Williams) Rubber Ring Kit
| 
Spring - Compression (Bally/Williams)
$0.70 each | 
Drop Target - Wide Top - White (Capcom) (SEE NOTE)
$4.49 each | 
Ball Gate Assembly (Bally)
|
Machine: Bride of PinBot (Williams) Bell Armature Assembly
$14.99 each | 
Creature From the Black Lagoon (Bally) Snack Bar Plastic (USED)
$10.00 each | 
Star-Flite (Segasa) Rubber Ring Kit
| 
Bally Repair Procedures Manual FO-560-1 (ORIGINAL)
$20.00 each | 
4050 / 14050B Hex Inverting Buffer IC (Switch Matrix & Display Driver)
$1.00 each |
Ribbon Cable - 26-pin 32-inch 2-connector
$25.19 each | 
Vector (Bally) Rubber Ring Kit
| 
Screw - #8-32 x 1 Torx Pan Head (TPH) Machine Thread (MS) Black
$0.40 each | 
Hardbody (Bally / Midway) Game Operating Manual (ORIGINAL)
$25.00 each | 
Relay Snubber Board Assy - 24 Volt (Data East/Sega/Stern)
|
Coil - C-7300-332 (Bally)
$22.99 each | 
Plastic Spacer - Black - 3/8 in x 5/16 OD x 0.192 ID (Bally/Williams)
$0.89 each | 
Eject Cam Assembly - Right (Bally/Williams)
$15.99 each | 
Lift trim - backglass - 27-inch black plastic - for 1/8-inch thick backglass
$9.49 each | 
Addams Family / Addams Family Gold (Bally) Small Blue Plastic
$3.50 each |
Pinball Parts
