Action Pinball - 80-5100-00 - Jamma Cable Harness & Connector- Arcade Video

Pinball Parts

Salt Lake City, Utah, USA
info@actionpinball.com Contact Us

Quick Links: - Home Page
- Game Parts & Supplies
- Game Service & Repair
- Games for Sale
- Ordering Info
- Technical Articles
- Contact Us

- US Shipping Only. International customers can order using a US forwarding service. (more info)

Click to Enlarge

Jamma Cable Harness & Connector- Arcade Video:

Price: $24.99 each
Status: In Stock
(5 Available)

Order:

Part #: 80-5100-00
Condition: New

New standard 56-pin Jamma connector and color-coded wiring harness. Used on many original and aftermarket arcade video game PC boards to connect to power supply and game hardware (joysticks, trackball, buttons, coin switches, test/service buttons, video, and audio.) Includes all connections for 1- or 2-player game setups. 28 pins on each side of the Jamma card-edge connector for a total of 56 pins.

Includes card-edge Jamma connector housing and wire harness with push button lugs, power/ground leads, and RGB monitor output connection for optional hookup to older CRT tube monitors. All leads have 0.187-inch quick disconnect lugs for easy connecting to buttons, joysticks, etc. Power/ground wires have fork terminals for easy connection to +5VDC, +12VDC, and GND at game power supply. Also features a full grounding loop for all joysticks and buttons on your control panel.

Can be used on any 1- or 2-player video game that supports the Jamma interface/wiring, or as an excellent replacement for older pre-Jamma connectors & harnesses in games with MPU card-edge connectors such as Pac-Man, Ms. Pac-Man, Mr. Do!, Galaxian, and more (see note below.)

Wire Size: Power/ground pins 1-6 are 18 gauge wire. All others are 22 gauge.
Connector includes un-wired position for optional -5vdc power.
Both ground connections are wired in the harness (pins 1, 2, 28).
All pins on connector are protected by heat shrink.
Wire ends for controls (buttons, etc.) include push-on terminals for quick connection (no soldering).
Wire end terminals insulated by plastic sleeves.
Pre-connected plugs and connections for your monitor, speakers, power supply, coin meter, etc.
Works with all game boards that use standard Jamma wiring.

NOTE: When using on a pre-Jamma or non-Jamma game, some relocating or removal of pins/wires may be required, depending on exact game pinout. Connector housing may need to be cut short to fit some card-edge connectors on some MPU boards. We recommend using a 0.156-inch pin extractor tool for easy pin removal and replacement.

This item is considered an electrical part, and is not eligible for return, exchange, or refund- all sales final.

Ask a question about this item

$8.79 One-Rate Shipping in U.S.!