Click to Enlarge
|
Space Invaders (Bally) Clear Plastics Set (3pcs) - Reproduction:
Price: $25.00 set
Status: In Stock
(1 Available)
Part #: M-1330-168-1-2-3
Condition: New
|
|
|
New reproduction clear plastics set (3pcs). These pieces serve as ball guides on the playfield, and attach to original/existing metal standoffs (standoffs not included). The two long pieces are for the captive ball lane in the upper left corner of playfield. The shorter single piece mounts in the spinner lane in the upper right.
These are new reproduction pieces. They ship with removable protective film on both sides to prevent scratches/scuffs during handling/shipping.
Replacements for factory part #s M-1330-168-1, M-1330-168-2, M-1330-168-3.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
BALLY: Space Invaders
|
Screw - #6 x 1/2 Phillips Round Head Wide / Truss (PRH-T) Wood Thread (SMS)
|
Part # HWR02-010606B
$0.15 each |
|
|
Cap Nut - White Nylon
|
Part # HWR01-040600
$0.29 each |
|
|
Space Invaders (Bally) Upper Left Corner Plastic - Reproduction (NEW/REPAIRED - SEE NOTES)
|
Part # M-1330-169-1
$45.00 |
|
|
Space Invaders (Bally) Upper Right Corner Plastic - Reproduction (SEE NOTES)
|
Part # M-1330-169-2
$35.00 |
|
|
Space Invaders (Bally) Upper Right Target/Spinner Lane Plastic - Reproduction (SEE NOTES)
|
Part # M-1330-169-3
$25.00 |
|
|
Space Invaders (Bally) Mystery Ship Plastic - Reproduction (SEE NOTES)
|
Part # M-1330-169-4
$25.00 |
|
|
Space Invaders (Bally) Slingshot Bumper Plastics (2pcs) - Reproduction (SEE NOTES)
|
Part # M-1330-169-5-6
$25.00 pair |
|
|
Space Invaders (Bally) Top Center Red Targets Plastics (2pcs) - Reproduction (SEE NOTES)
|
Part # M-1330-169-7-8
$20.00 pair |
|
|
Space Invaders (Bally) Center Loop Plastic - Reproduction (SEE NOTES)
|
Part # M-1330-169-9
$40.00 |
|
|
Space Invaders (Bally) Collect Bonus Plastic - Reproduction (SEE NOTES)
|
Part # M-1330-169-10
$10.00 |
|
|
Space Invaders (Bally) Price Plates (2pcs) - Free Play
|
|
|
Space Invaders (Bally) Backbox Topper Plastics / Hardware Set (11pcs)
|
|
|
Space Invaders (Bally) Pinball Machine - Restored/Upgraded
|
Part # GAME_SI4547
$12,500.00 Free Shipping * |
|
|
Space Invaders pinball (Bally) Game ROM Set (3pcs) (SEE NOTE)
|
|
|
Space Invaders (Bally) ROM Chips
|
Part # ROMS296
$18.00 and up |
|
|
Bally U6 ROM Chip 720-3532 v9.0 (Free Play / 6 or 7 Digit) (SEE NOTES)
|
Part # ROMS532
$18.00 each |
|
|
Space Invaders (Bally) Game Manual & Schematics
|
Part # PM0353
$25.08 each |
|
|
Bally Games FO-560-3 Service / Repair Manual
|
Part # PM0078
$32.74 each |
|
|
Bally Theory of Operation Manual FO-601-2 (May 1982) (REPRINT)
|
Part # PM0080
$17.62 each |
|
|
Space Invaders (Bally) Rubber Ring Kit
|
Part # KIT075
$19.16 each |
|
|
Space Invaders (Bally) Pop Bumper Cap Set (3pcs)
|
|
|
Space Invaders (Bally) Passive Bumper Cap - 50 Points
|
Part # A-3852-2
$9.95 each |
|
|
Space Invaders (Bally) Spinner Target w/ Decals
|
Part # A-7861-K-SI
$16.39 each |
|
|
Space Invaders / Xenon (Bally) Backbox Latch Screw Set (2pcs)
|
Part # HWR02-081127
$1.10 set |
|
|
Varistor Info Card for Cabinet (Bally)
|
|
|
Factory Inspection Card for Cabinet (Bally)
|
|
|
Award Threshold Adjustments Card for Cabinet (Bally)
|
|
|
Protector - Ball Shooter Lane (Bally)
|
|
|
Pop Bumper Body - Early / Vintage Games
|
Part # C-114-3
$3.59 each |
|
|
Pop Bumper Assembly (Bally SS) w/ AE-26-1200 Coil
|
Part # POP_ASSY2
$59.53 each |
|
|
Flipper Cap Set - 2-Inch - Left & Right w/Blue FLIPPER
|
Part # A-3739SET
$20.00 set |
|
|
Flipper Assembly - Left (Bally) w/ AQ-25-500/34-4500 Coil (SEE NOTES)
|
Part # ASE-1587-101-A
$90.99 each |
|
|
Flipper Rebuild Kit (w/ 3-leaf EOS Switch) - One Flipper - Bally Games 1975-1980 (SEE NOTES)
|
Part # FLKIT7
$30.15 each |
|
|
DIP Switch Bank - 8 Position
|
|
|
Fuse Kit - Bally Electronic Games (1977-1984) (SEE NOTES)
|
Part # FKBLYSS
$9.74 each |
|
|
Fuse Puller Tool - For Glass Fuses
|
|
|
Circuit Breaker Testing Set (6pcs)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Heat Shrink Tubing Kit - 127 Pieces
|
|
|
C23 Capacitor Replacement Kit - Bally/Stern Games (1977-1985)
|
Part # KITC23CAP
$10.73 each |
|
|
#555 Lamp (Box of 10)
|
|
|
#555 Lamp (Box of 100)
|
Part # LAM555C
$20.00 box |
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED Conversion Adapter Kit for Bally / Stern Main Lamp Driver Board (SEE NOTES)
|
|
|
LED- #555 3-Element (SEE NOTES)
|
Part # LED3555
$0.99 & up |
|
|
LED- #555 4-Element (SEE NOTES)
|
Part # LED4555
$1.25 & up |
|
|
LED- #555 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED555D
$1.19 & up |
|
|
LED- #555 Flexible-Lead (Non-Ghosting) (SEE NOTES)
|
Part # LED555F
$1.29 & up |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Keyless Lock - 7/8 Inch
|
Part # LOCKHM78
$5.99 each |
|
|
Novus Polish Set - #1 #2 #3
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Car License Plate Frame - Playing Pinball
|
Part # LICFRAME1
$5.00 each |
|
|
Pinball Parts
