|
- US Shipping Only. International customers can order using a US forwarding service. (more info)
|
Click to Enlarge
|
Standup Target - Round Orange - Rear-Mount:
Price: $15.57 each
Status: In Stock
(6 Available)
Part #: A-14690-15
Condition: New
|
|
|
Replacement round orange standup (stationary) target. Used on late-model Bally and Williams games but can be used on older models and other makes/models as well. Includes mounting bracket and switch diode, as pictured. Rear-mount target- mounting bracket is on back of target. Target face is 1-inch diameter.
Replaces #s A-15118-15, B-12039-15, B-14077-15. Can also be used as substitute for obsolete Data East / Sega part #s 500-5835-03, 515-5124-13, and 515-5966-03.
Requires two screws for mounting (not included- use our part # HWR02-030606). Wires must be connected with correct polarity- if installing in a late-model Bally or Williams game, green wire(s) will go to empty solder lug, and white wire(s) will connect to solder lug with diode's anode (non-banded) end.
NOTE: This is a modern Bally/Williams style replacement target. Target may sit slightly lower (about 3/32-inch (2mm)) when used on older games. If replacing targets on older games, you might consider replacing all targets in the bank at the same time, to retain uniform alignment.
Ask a question about this item
Used In The Following Games: (The list below may not be complete, and it's accuracy is not guaranteed. Contact us if you have any questions.)
WILLIAMS: No Good Gofers, Terminator 2
|
Standup Target - Round Blue - Front-Mount
|
Part # A-14691-1
$11.99 each |
|
|
Standup Target - Round Green - Front Mount
|
Part # A-14691-2
$11.99 each |
|
|
Standup Target - Round Red - Front Mount
|
Part # A-14691-4
$11.99 each |
|
|
Standup Target - Round White - Front Mount
|
Part # A-14691-5
$11.99 each |
|
|
Standup Target - Round Yellow - Front Mount
|
Part # A-14691-6
$11.99 each |
|
|
Standup Target - Round Orange - Front Mount
|
Part # A-14691-15
$11.99 each |
|
|
Target Backing Foam Pad - Gray 3/8 x 3/4 Inch
|
Part # 23-6534-9
$0.30 each |
|
|
Screw - #6 x 1/2 Hex Washer Head (HWH) Wood Thread (SMS)
|
Part # HWR02-030606
$0.15 each |
|
|
Red Bullseye Target Decal (Williams)
|
|
|
Blue Bullseye Target Decal (Williams)
|
|
|
Decal - Blue & Red Bullseye Target w/ Center Hole
|
|
|
Round Target Decal - Silver Hologram
|
|
|
Round Target Decal - Amber Hologram
|
|
|
Soldering Kit - 30-Watt General Purpose (4 pcs)
|
Part # SI-30-KIT
$24.29 set |
|
|
Wire Nut -Small - 16-20ga
|
Part # WIRENUT1
$0.25 each |
|
|
DeoxIT Anti-Oxidant Compound D100L (2cc)
|
|
|
Digital Multi-Meter / Multi-Tester With Leads (Color May Vary)
|
Part # METER02
$12.99 each |
|
|
18 Inch Test Lead Set (10pcs)
|
Part # TESTLEADS10
$7.99 each |
|
|
Heat Sink Compound - 5g Tube
|
|
|
Rubber Assortment Kit - White (50pcs)
|
Part # KIT000W
$29.70 each |
|
|
#44 Lamp (Box of 10)
|
|
|
#555 Lamp (Box of 10)
|
|
|
Lamp Assortment Kit (#44,#555,#906,#89)
|
|
|
Light Bulb Extractor Tool
|
Part # LAMPTOOL
$0.89 each |
|
|
LED- #44 / #47 3-Element (SEE NOTES)
|
Part # LED3044
$0.99 & up |
|
|
LED- #555 Dome Lens (Non-Ghosting) (SEE NOTES)
|
Part # LED555D
$1.19 & up |
|
|
Pin Ball - 1-1/16 Inch Diameter (Standard Size)
|
|
|
Novus #2 Cleaner/Polish 8oz
|
|
|
Mothers California Gold Liquid Carnauba Cleaner / Wax - 16oz
|
Part # MOTHERS_WAX
$14.49 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike
|
Part # LOCKDB78A
$5.99 each |
|
|
Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike # 7500 Key- Fort/Hawk Style (SEE NOTE)
|
Part # LOCKDB78
$9.99 each |
|
|
Cabinet Leg Protector Pads (4pcs)
|
Part # LEGPADS
$11.95 set |
|
|
Pinball Parts
