| Coin Reject Button (Williams) Part #: 2A-3350
Condition: New
Metal coin reject button used on some older Williams games from the late 1960s through early 1980s.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Cash Box (Williams) Part #: 01-3493-1
Condition: New
Metal bracket for coin box locking/securing. Mounts in center of cabinet behind coin box area inside front door. Used on many... more
Non-stocked, special-order item. (Contact us for ordering info.)
$10.09 each Details | Related Items |
|
| Mounting Plate - Ball Shooter Housing (Bally/Williams) Part #: 01-3535
Condition: New
Discontinued - occasionally available used (part # U944. Or use Stern #... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Playfield Support Arm (Bally/Williams) Part #: 01-4028
Condition: New
Playfield support arm used in many old and new Bally and Williams games. Measures 20-5/8 inches in length, 1 inch wide, 1/8... more
Non-stocked, special-order item. (Contact us for ordering info.)
$25.19 each Details | Related Items |
|
| Coin Entry Plate - Quarter (Williams) Part #: 01-4215
Condition: New
Metal coin entry plate for US or Canadian Quarters. Used on Williams doors from approximately 1965-1982. This piece fits over... more
Out of Stock
$5.59 each Details | Related Items |
|
| Coin Entry Plate - Quarter (Williams) (USED) Part #: 01-4215U
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
Out of Stock
Details | Related Items |
|
| Coin Entry Plate - Nickel (Williams) Part #: 01-4215-N
Condition: New
Metal coin entry plate for US Nickels. Used on Williams doors from approximately 1965-1982. This piece fits over the plastic... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Entry Plate - Nickel (Williams) (USED) Part #: 01-4215-NU
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
In Stock
$5.50 each Order | Details | Related Items |
|
| Coin Entry Plate - Dime (Williams) Part #: 01-4215-D
Condition: New
Metal coin entry plate for US Dimes. Used on Williams doors from approximately 1965-1982. This piece fits over the plastic... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Entry Plate - Dime (Williams) (USED) Part #: 01-4215-DU
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
In Stock
$3.50 each Order | Details | Related Items |
|
| Coin Entry Plate - Dollar (Williams) Part #: 01-4215-SBA
Condition: New
Metal coin entry plate for US Dollar coins. Used on Williams doors from approximately 1965-1982. This piece fits over the... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Trim - Upper - Coin Door Opening 1965-1982 (Williams) Part #: 01-4219
Condition: New
Metal trim piece that goes across top of coin door opening on multi-slot coin doors used on most Williams pinball, video, and... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Door Interlock Switch Mounting Plate (Williams) Part #: 01-5589
Condition: New
Metal mounting plate for memory protect interlock switch used on early Williams electronic... more
Temporarily out. Please check back. more info...
$9.69 each Details | Related Items |
|
| Bracket - Coin Door Lock (Williams) Part #: 01-6249
Condition: New
Metal security bracket for coin door lock. Serves as a reinforcement for lock tab. Usually missing on most games. Used on 2-... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Coin Box (Williams) (USED) Part #: 01-6389U
Condition: Used
Used bracket that mounts on inside edge of cabinet front and keeps coin box centered under coin door. Used on Williams... more
Out of Stock
$15.00 each Details | Related Items |
|
| Backglass Lock Strap (Williams) Part #: 01-6517
Condition: New
Long metal bracket / strap used on top side of backbox interior on early Williams electronic solid-state (SS) pinball games.... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Backglass Lock Strap Guide Bracket (Williams) Part #: 01-6580
Condition: New
Bracket used to support and guide lock strap bracket for backglass in backbox of early Williams electronic solid-state (SS)... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Backglass Lock Strap Latch Bracket (Williams) Part #: 01-6581
Condition: New
Short metal bracket (2 used per game). Mounts on top of strap # 01-6517 and used to hold backglass in place when locked, in... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Metal Grille / Vent - Backbox Neck (Williams) Part #: 01-6584
Condition: New
Perforated sheet metal grille / vent / screen used at top of main cabinet for ventilation into neck / backbox. Factory part #... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Neck Bracket - Main Cabinet (Williams) Part #: 01-6589
Condition: Used
90-degree metal bracket that mounts at top/back of main cabinet in older Williams electronic solid-state (SS) games and helps... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Grille - Metal - Cabinet Vent 2.5 x 2.5 Inches (Bally/Williams) Part #: 01-6592
Condition: New
Metal grille for rear vent openings in main cabinet. 2 used per game. Used on Bally games around approx. 1990, and Williams... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Anti-Theft (Williams) Part #: 01-6630
Condition: New
Metal bracket that mounts above circuit boards and below rear vent area inside backbox on early Williams electronic solid-state... more
Out of Stock
Details | Related Items |
|
| Bracket - CPU Mounting - Upper (Williams) Part #: 01-6639
Condition: New
Bracket used for top of MPU board mounting in backbox. 10-1/2 inches overall length, 10 inches between PC board mounting... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - CPU Mounting - Upper (Williams) (USED) Part #: 01-6639U
Condition: Used
Used bracket used for top of MPU board mounting in backbox. 10-1/2 inches overall length, 10 inches between PC board mounting... more
Out of Stock
$5.00 each Details | Related Items |
|
| Cabinet Ventilation Grille - Metal (Bally/Williams) Part #: 01-6645
Condition: New
Metal grille used at top of backbox rear for ventilation in many Bally and Williams games from 1977-up. Measures 19 inches wide... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Cabinet Connecting (Williams) Part #: 01-6646
Condition: Used
Backbox mounting bracket that connects backbox to main cabinet neck. Mounts on backbox bottom and latches to cabinet neck... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Insert Stop Bracket (Williams) Part #: 01-6647
Condition: New
Metal bracket used in backbox of early Williams electronic solid-state (SS) pinball games to stop and support insert panel when... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Latch - Backbox Insert Door Securing (Williams) (USED) Part #: 01-6655U
Condition: Used
Latch used on insert panel to secure panel in closed position. Used part in good condition.
Out of Stock
$4.00 each Details | Related Items |
|
| Bracket - Driver Board Mounting (Williams) Part #: 01-6661
Condition: New
Driver board metal mounting bracket used in backbox of early Williams electronic solid-state (SS) pinball games. 2 used per... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Grille - Metal - Cabinet Speaker 7 x 7 Inches (Bally/Williams) Part #: 01-6733
Condition: New
Metal grille for speaker opening in main cabinet. Used on Bally games around approx. 1990, and Williams games from approx. 1978... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Sound Board Mounting (Williams) Part #: 01-6734
Condition: New
2 used per game. Metal bracket used in backbox (or main cabinet in early models) to hold sound board in most Williams... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Playfield Support Arm (Bally/Williams) Part #: 01-12352
Condition: New
Metal 90-degree bracket that mounts on right inside wall of main cabinet and holds end of playfield support arm when in the... more
Non-stocked, special-order item. (Contact us for ordering info.)
$9.49 each Details | Related Items |
|
| Bushing - Backglass Lock/Latch Bar (Williams) Part #: 02-3970
Condition: New
Metal spacer washer (bushing) for mounting left end of backglass latch bar in top of backbox.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bushing - Backglass Lock/Latch Bar (Williams) (USED) Part #: 02-3970U
Condition: Used
Metal spacer washer (bushing) for mounting left end of backglass latch bar in top of backbox. Used part in good condition.... more
Out of Stock
$2.00 each Details | Related Items |
|
| Cover - Coin Switch - Yellow Plastic - Early Version (Williams) Part #: 03-7233E
Condition: New
Molded yellow plastic cover for coin switch on Williams 2- and 3-slot coin doors. This early version was used on most coin... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Cover - Coin Switch - Yellow Plastic - Late Version (Williams) Part #: 03-7233L
Condition: New
Molded yellow plastic cover for coin switch on Williams 2- and 3-slot coin doors. This late version was used on most coin doors... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Ball Shooter Sleeve - 2-1/4 Inch x 3/8 Inch ID Part #: 03-7357
Condition: New
Used on most all Williams games with standard type plunger up through year 2000, as well late-model Bally games (1989-up), and... more
In Stock
$0.79 each Order | Details | Related Items |
|
| Molding - Transformer Shield (Williams) Part #: 03-7363-1
Condition: New
Gray plastic molding / edge-protector piece used on metal transformer shield in backbox of some early Williams electronic... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Entry Chute - White Plastic (Williams) Part #: 03-7472
Condition: New
White plastic coin entry chute used on late Williams electro-mechanical (EM) and early electronic solid-state (SS) games from... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Entry Chute - White Plastic (Williams) (USED) Part #: 03-7472U
Condition: Used
Used white plastic coin entry chute used on late Williams electro-mechanical (EM) and early electronic solid-state (SS) games... more
Out of Stock
$8.00 each Details | Related Items |
|
| Ball Shooter External Barrel Spring - 7/8 Inch Part #: 10-149
Condition: New
7/8-inch overall length spring used on outer side of ball shooter / plunger. Common spring for most makes/models (for Data East... more
In Stock
$0.69 each Order | Details | Related Items |
|
| Coin Entry Plate - Blank w/ Williams Logo - NOS (Williams) Part #: 16-8636
Condition: New
Blank metal coin entry plate with red Williams W logo in center. Used to block any unused coin entry positions on coin doors... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Entry Plate - Blank w/ Williams Logo (Williams) (USED) Part #: 16-8636U
Condition: Used
Used part in fair condition. Has some surface scratches/scuffs from past use. Blank metal coin entry plate with red... more
Out of Stock
$5.00 each Details | Related Items |
|
| Price Plate (Williams) 2 Nickels 1 Play - Blue/Black Part #: 16C-8640-4
Condition: New
Plastic price plate for coin slot entry. Used on older Williams pinball and arcade games from mid 1960s through early 1980s.... more
Out of Stock
$3.25 each Details | Related Items |
|
| Price Plate (Williams) 2 Nickels 1 Play - Blue/Black (USED) Part #: 16C-8640-4U
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
Out of Stock
$3.00 each Details | Related Items |
|
| Price Plate (Williams) Dime 1 Play - Yellow/Black Part #: 16C-8640-5
Condition: New
Plastic price plate for coin slot entry. Used on older Williams pinball and arcade games from mid 1960s through early 1980s.... more
Out of Stock
$7.75 each Details | Related Items |
|
| Price Plate (Williams) Dime 1 Play - Yellow/Black (USED) Part #: 16C-8640-5U
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
In Stock
$4.00 each Order | Details | Related Items |
|
| Price Plate (Williams) Quarter 3 Plays - Red/Black Part #: 16C-8640-6
Condition: New
Plastic price plate for coin slot entry. Used on older Williams pinball and arcade games from mid 1960s through early 1980s.... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Price Plate (Williams) Quarter 3 Plays - Red/Black (USED) Part #: 16C-8640-6U
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
Out of Stock
$3.00 each Details | Related Items |
|
| Price Plate (Williams) 2 Plays Quarter - Yellow/Black Part #: 16C-8640-100
Condition: New
Plastic price plate for coin slot entry. Used on older Williams pinball and arcade games from mid 1960s through early 1980s.... more
Out of Stock
$9.10 each Details | Related Items |
|
| Price Plate (Williams) 2 Plays Quarter - Yellow/Black (USED) Part #: 16C-8640-100U
Condition: Used
Image is sample only- actual item may vary slightly in condition. Used part in good condition. May have some signs of past use... more
Out of Stock
$5.00 each Details | Related Items |
|
| Bracket - Coin Mechanism Retainer (Williams) Part #: 1A-4253
Condition: Varies
Metal bracket that attaches to left edge of coin mechanism and holds it in place on Williams 2- and 3-slot coin doors used on... more
Non-stocked, special-order item. (Contact us for ordering info.)
$4.19 each Details | Related Items |
|
| Ball Shooter Rod With Black Knob (Bally / Williams) Part #: 20-9253-7
Condition: New
Standard replacement ball shooter rod for most makes/models of pinball games. Replaces Bally/Williams part #20-9253-7, Capcom #... more
In Stock
$9.79 each Order | Details | Related Items |
|
| Ball Shooter Housing - Chrome Part #: 21-6645-1
Condition: New
New chrome metal ball shooter housing. Replacement for Williams games mid 1960s through 1999, and Bally games approx.... more
In Stock
$16.79 each Order | Details | Related Items |
|
| Button - White - Long Part #: 3A-7531-5
Condition: New
White plastic pushbutton with threaded housing. LONG button measuring 1-1/4-inches deep, 7/8-inch thread length. Commonly used... more
In Stock
$3.79 each Order | Details | Related Items |
|
| Button - White - Long (USED) Part #: 3A-7531-5U
Condition: Used
Long flipper button as used on many vintage Williams solid-state pinball games. Housing overall length is 1-3/8 inch. Threaded... more
In Stock
$3.00 each Order | Details | Related Items |
|
| Test/Service Switch - Momentary Contact (Bally/Williams) Part #: 5641-09312-00
Condition: New
Replacement test/service switch for use in many Bally and Williams games. Used in switch assembly #s... more
In Stock
$4.49 each Order | Details | Related Items |
|
| Service Button Assembly - 3 Buttons (Momentary & Push on/Push off) Part #: 5641-09369-00
Condition: New
Coin door service button assembly with 3 pushbutton switches. Outer switches are momentary contact, and center switch is... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coil Plunger - Knocker / Chime / Bell - 2-1/2-Inch (Williams) Part #: A-5387
Condition: New
Coil plunger for replay knocker and scoring chimes/bells, as used in many Williams games, old and new. Measures 2-1/2-inches... more
In Stock
$5.59 each Order | Details | Related Items |
|
| Coin Reject Button (Williams) Part #: A-6847
Condition: New
Metal coin reject button used on some older Williams games from the late 1960s through early 1980s.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Switch Trip Assembly 10/25-Cent (Williams) Part #: A-7016
Condition: New
Coin switch trip wire assembly used on older Williams games. For use with US dimes and quarters.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Top Hinge Assembly - Backbox Insert (Williams) Part #: A-7984
Condition: New
Backbox insert panel top hinge assembly. Acts as a support/hinge bracket for holding top of backbox insert panel in early... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Top Hinge Assembly - Backbox Insert (Williams) (USED) Part #: A-7984U
Condition: Used
Used backbox insert panel top hinge assembly. Acts as a support/hinge bracket for holding top of backbox insert panel in early... more
Out of Stock
$5.00 each Details | Related Items |
|
| Bottom Hinge Assembly - Backbox Insert (Williams) Part #: A-7985
Condition: New
Backbox insert panel lower hinge assembly. Acts as a support bracket for holding backbox insert panel in early Williams... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bottom Hinge Assembly - Backbox Insert (Williams) (USED) Part #: A-7985U
Condition: Used
Used backbox insert panel lower hinge assembly. Acts as a support bracket for holding backbox insert panel in early Williams... more
Out of Stock
$5.00 each Details | Related Items |
|
| Lock Cam Assembly (Williams) Part #: A-7993
Condition: New
Lock cam assembly used on lock in backbox of early Williams electronic solid-state (SS) pinball games. Connects lock to link... more
Out of Stock
Details | Related Items |
|
| Link Assembly - Backbox Lock (Williams) Part #: A-8044
Condition: New
Link assembly used on backglass lock assembly in backbox on early Williams electronic solid-state (SS) pinball games. Connects... more
Out of Stock
Details | Related Items |
|
| Ball Shooter Assembly w/ Black Knob Part #: A-17730
Condition: New
Complete ball shooter assembly with chrome housing and black shooter knob. Can be used as replacement on many later-model Bally... more
In Stock
$36.97 each Order | Details | Related Items |
|
| Bracket - Replay Knocker Mounting (Williams) Part #: B-5778
Condition: New
Metal mounting bracket for replay knocker mechanism used in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Switch Assembly - Nickels (Bally/Williams) Part #: B-6582
Condition: New
Coin switch assembly used for US nickels. Used in older Williams games from mid-1960s through early 1980s.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Switch Assembly - Dimes & Quarters (Williams) Part #: B-6853
Condition: New
Coin switch assembly used for US dimes and quarters. Used in older Williams games from mid-1960s through early 1980s.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Ball Shooter Assembly (Williams) Part #: B-7592
Condition: New
Discontinued- use # A-17730 as replacement. Ball shooter assembly for Williams games... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - CPU Mounting - Lower (Williams) Part #: B-8015
Condition: New
Lower metal mounting bracket for CPU/MPU board used in early Williams solid-state (SS) pinball games, approx. 1977-1984. This... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Shield Assembly - Transformer (Williams) Part #: B-8030
Condition: New
Metal grille shield assembly used to protect backbox-mounted transformer in some early Williams electronic solid-state (SS)... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Replay Knocker Assembly - Solid-State (SS) Games (Williams) Part #: B-8047
Condition: New
Upright replay knocker assembly used in some older Williams electronic solid-state (SS) games. Includes... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Trim Set - 3-piece - Backglass Top & Sides - for 3/16-inch Thick Backglass Part #: BGTRIM3PC3/16
Condition: New
Black plastic. Includes two (2) side pieces 24-1/2-inches each, and one (1) top piece 28-1/2 inches. Fits 3/16-inch thick... more
In Stock
$14.99 set Order | Details | Related Items |
|
| Lift Trim - Stainless Steel - 28-1/2 Inch - for 3/16 inch Thick Backglass Part #: BGTRIMSS3/16
Condition: New
Metal Trim - or lift channel, that goes on the bottom edge of the backglass on older games that use a 3/16-inch thick... more
In Stock
$29.99 each Order | Details | Related Items |
|
| 25-cent (US/Canada) Coin Mechanism - Metal Part #: COINMECH25
Condition: New
SEE FITMENT NOTES BELOW BEFORE ORDERING. 25-cent coin mechanism designed for use with U.S.... more
Temporarily out. Please check back. more info...
$18.99 each Details | Related Items |
|
| 25-cent (US/Canada) Coin Mechanism - Composite Part #: COINMECH25A
Condition: New
SEE FITMENT NOTES BELOW BEFORE ORDERING. 25-cent coin mechanism designed for use with U.S.... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Door Skin (Williams) Part #: D-6846-1
Condition: New
Blank metal 3-slot coin door skin with hinge. Used on Williams games from approximately 1965-1982. Part of D-7078 full coin... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Door Skin (Williams) (USED) Part #: D-6846-1U
Condition: Used
Used part in good condition. Has some surface scratches/scuffs and small dings/dents from past normal use. No drill holes or... more
Out of Stock
$25.00 each Details | Related Items |
|
| Lockdown Bar Foam Strip - Williams Widebody Games (1967-1980) Part #: FOAMLB_WMSWB
Condition: New
Self-adhesive foam strip that mounts on bottom side of front lockdown bar between bar and playfield glass. 27-inch width for... more
In Stock
$5.13 each Order | Details | Related Items |
|
| Ball Shooter Rebuild Kit - Medium Strength Spring (Bally / Chicago Gaming / Data East / Williams) (SEE NOTE) Part #: KIT_PLUNGER1
Condition: New
Ball shooter rebuild kit for use on many Bally (late models approx. 1987-up only), Chicago Gaming, some Data East (see game... more
In Stock
$15.12 each Order | Details | Related Items |
|
| Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike - Fort/Hawk Style (SEE NOTE) Part #: LOCKDB78
Condition: New
Fort brand style lock for use on most games for coin door and backbox. Keyed alike- key is same from lock to lock (see note... more
Temporarily out. Please check back. more info...
$9.99 each Details | Related Items |
|
| Game Lock With Keys - 7/8 Inch - Double-Bitted - Keyed-Alike Part #: LOCKDB78A
Condition: New
Standard size lock as used on most games for coin door and backbox. 7/8-inch length barrel (threaded portion of lock). Comes... more
In Stock
$5.99 each Order | Details | Related Items |
|
| Keyless Lock - 7/8 Inch Part #: LOCKHM78
Condition: New
Keyless lock for use on most makes/models of games where security is not required. Has turn tab to operate lock instead of... more
In Stock
$5.99 each Order | Details | Related Items |
|
| Coin Door Price Plate - Red Quarters (Williams) Part #: PDG002
Condition: New
Plastic price tag, or plate for coin slots on Williams 2- and 3-slot coin doors, used from mid-1960s to mid-1980s. Quarters... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Door Price Plate - Yellow Dollars (Williams) Part #: PDG003
Condition: New
Plastic price tag- or Plate - for coin slots on Williams 2- and 3-slot coin doors, used from mid-1960s to mid-1980s. Dollars... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Coin Door Price Plate - Yellow Dollars (BLEMISH) (Williams) Part #: PDG003B
Condition: New
Blemished part- has a small bend on top left corner, and cut/scrape on lower left corner. Can be cleaned-up to fit and... more
Out of Stock
Details | Related Items |
|
| Decal - Cabinet Ground Warning (Williams) Part #: PDG354
Condition: New
Large orange/yellow decal for back of main cabinet on early Williams electronic solid-state (SS) pinball games. Gives warning... more
In Stock
$4.50 each Order | Details | Related Items |
|
| Decal - Backbox Ground Strap (Bally / Williams) Part #: PDG357
Condition: New
This decal mounts in the backbox on most Williams and later-model Bally electronic pinball games near the connection point for... more
In Stock
$1.99 each Order | Details | Related Items |
|
| Decal Set - TESTED BY - 3pcs (Williams) Part #: PDG358
Condition: New
Set of three yellow TESTED BY decals for Williams solid-state pinball cabinets. Reproductions of decals originally used at the... more
In Stock
$5.00 set Order | Details | Related Items |
|
| Decal - Coin Door Test Button (Williams) Part #: PDG361
Condition: New
For use with 2- or 3-button panels on inside of coin door (cut 'high score reset' end off for use with 2-button panels). This... more
In Stock
$4.50 each Order | Details | Related Items |
|
| Decal Set - Coin Mechanism - 2pcs (Williams) Part #: PDG362
Condition: New
This 2-piece decal set mounts on the inside edge of the coin door on early Williams solid-state games from approx. 1977-1983.... more
In Stock
$7.95 set Order | Details | Related Items |
|
| Decal Set - Coin Door Interior Decal - 5pcs (Williams) Part #: PDG364
Condition: New
5-piece decal set for the interior of coin doors on Williams games approx. 1977-1985. Includes coin tag and mechanism... more
In Stock
$14.95 set Order | Details | Related Items |
|
| Bracket 01-6580 - Backglass Latch Support (Williams) (USED) Part #: U39
Condition: Used
Bracket that screws to top inside of backbox and supports latch that locks backglass in place. Factory part # 01-6580. ... more
In Stock
$5.00 each Order | Details | Related Items |
|
| Backglass Locking Tab 01-6581 (Williams) (USED) Part #: U56
Condition: Used
Metal tab that screws to backglass locking latch bar and holds backglass in place when locked. Factory part # 01-6581. Used in... more
Out of Stock
$3.00 each Details | Related Items |
|
| Armor Bracket - Cabinet Interior (Williams) (USED) Part #: U586
Condition: Used
Used cabinet interior protector bracket for old Williams electro-mechanical (EM) and early electronic solid-state (SS) games. 2... more
In Stock
$3.50 each Order | Details | Related Items |
|
| Lift Trim - Stainless Steel - 28-1/2 Inch - for 3/16 inch thick backglass (USED) Part #: U785
Condition: Used - Fair/Good
Used metal backglass lift channel. Fits 3/16 inch thick backglasses. 28-1/2 inches overall length. Used part in fair/ood... more
Out of Stock
$13.00 each Details | Related Items |
|
| Bracket B-8015 - CPU Mounting - Lower (Williams) (USED) (SEE NOTE) Part #: U838
Condition: Used
Used lower metal mounting bracket for CPU/MPU board used in early Williams solid-state (SS) pinball games, approx. 1977-1984.... more
In Stock
$5.00 each Order | Details | Related Items |
|