| Pop Bumper Metal Yoke (Stern) Part #: 1A-124
Condition: New
Discontinued - can use Bally/Williams # 01-5492 as replacement. Metal linkage yoke... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Shoulder Stud - Stern Drop Target Mounting Part #: 2A-230
Condition: New
Discontinued - use # S-458-27 as replacement. Used with... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Spacer - Pop Bumper Assembly (Stern) Part #: 4A-123-16
Condition: New
Metal tube spacer used on pop bumper assemblies in some early Stern games, late 1970s and early 1980s.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Flipper Cap - 3-Inch White (Stern) Part #: 4B-122-W
Condition: New
Discontinued - use Bally # C-611-5 as replacement. White plastic flipper cap for... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Coil Retaining - Non-Threaded (Bally/Williams) Part #: 01-8-508-S
Condition: New
Metal coil retaining bracket for many different assemblies on Bally/Williams games, but can be used on many other makes and... more
In Stock
$6.29 each Order | Details | Related Items |
|
| Bracket - Coil Retaining - Non-Threaded (Bally/Williams) (USED) Part #: 01-8-508-SU
Condition: Used - Good
Used metal coil retaining bracket for many different assemblies on Bally/Williams games, but can be used on many other makes... more
In Stock
$4.50 each Order | Details | Related Items |
|
| Bracket - Coil Retaining - Threaded #8-32 (Bally/Williams) Part #: 01-8-508-T
Condition: New
Metal coil retaining bracket for many different assemblies on Bally/Williams games, but can be used on many other makes and... more
In Stock
$5.79 each Order | Details | Related Items |
|
| Bracket - Coil Retaining - Threaded #8-32 (Bally/Williams) (USED) Part #: 01-8-508-TU
Condition: Used - Good
Used metal coil retaining bracket for many different assemblies on Bally/Williams games, but can be used on many other makes... more
Out of Stock
$2.00 each Details | Related Items |
|
| Bracket - Flipper Coil Mounting (Williams) Part #: 01-600
Condition: New
Metal mounting bracket for flipper coil in many Williams electro-mechanical (EM) and early solid-state (SS) pinballs through... more
In Stock
$10.99 each Order | Details | Related Items |
|
| Stop Bracket - Pop Bumper Plunger/Yoke (Bally/Williams) Part #: 01-1747
Condition: New
Discontinued - use # 535-7347-00 as replacement. Bracket for pop bumper... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Link - Outhole Kicker - White Plastic (Bally/Williams) Part #: 01-4251
Condition: New
1 link used per game- replaces 2 original thin bakelite links. Thick plastic coil... more
In Stock
$3.99 each Order | Details | Related Items |
|
| Link - Outhole Kicker - Original Bakelite (Bally/Williams) (2 Required Per Game) Part #: 01-4251-B
Condition: New
2 links used per game. Original style bakelite coil plunger linkage for outhole kicker assembly on Williams games from... more
In Stock
$1.69 each Order | Details | Related Items |
|
| Flipper Link - Bakelite 1967-1979 (Williams) Part #: 01-4603-1
Condition: New
Bakelite link for flipper coil plunger used on Williams games from approx. 1967-1979. Part of plunger/link assembly # A-6939-1... more
Non-stocked, special-order item. (Contact us for ordering info.)
$3.19 each Details | Related Items |
|
| Metal Yoke - Pop Bumper (Bally/Williams) Part #: 01-5492
Condition: New
Metal pop bumper yoke used on many Williams and late-model Bally games. Can also be used on similar makes/models. Commonly... more
In Stock
$1.29 each Order | Details | Related Items |
|
| Metal Yoke - Pop Bumper (Bally/Williams) (USED) Part #: 01-5492U
Condition: Used - Good
Used metal pop bumper yoke for many Williams and late-model Bally games. Can also be used on similar makes/models. Commonly... more
In Stock
$0.80 each Order | Details | Related Items |
|
| Fiber Yoke - Pop Bumper (Bally/Williams) Part #: 01-5493
Condition: New
Bakelite pop bumper yoke used on many Williams and late-model Bally games. Can also be used on similar makes/models. Replaces... more
In Stock
$1.19 each Order | Details | Related Items |
|
| Fiber Yoke - Pop Bumper (Bally/Williams) (USED) Part #: 01-5493U
Condition: Used
Used bakelite pop bumper yoke used on many Williams and late-model Bally games. Can also be used on similar makes/models.... more
In Stock
$0.80 each Order | Details | Related Items |
|
| No Good Gofers (Williams) Residual Plate Part #: 01-6376
Condition: New
Residual armature plate used in Williams No Good Gofers pinball. Ships flat- bend side tabs upward 90-degrees before... more
Out of Stock
$5.69 each Details | Related Items |
|
| Bracket - Single Drop Target Assembly (Williams) Part #: 01-6450-1
Condition: New
Target ledge bracket used on single drop target units in some older Williams games. Used on assembly # D-7931-1S. Also replaces... more
Out of Stock
$6.49 each Details | Related Items |
|
| Bracket - Drop Target 2 Bank (Williams) Part #: 01-6450-2
Condition: New
Target ledge bracket used on 2-bank drop target units in some older Williams games.
Out of Stock
$13.79 each Details | Related Items |
|
| Bracket - Drop Target 3 Bank (Williams) Part #: 01-6450-3
Condition: New
Target ledge bracket used on 3-bank drop target units in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Drop Target 4 Bank (Williams) Part #: 01-6450-4
Condition: New
Target ledge bracket used on 4-bank drop target units in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Drop Target 5 Bank (Williams) Part #: 01-6450-5
Condition: New
Target ledge bracket used on 5-bank drop target units in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Drop Target Reset - Single Bank (Williams) Part #: 01-6451-1
Condition: New
Reset bracket used on single-bank drop target assemblies in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Drop Target Reset - 2-Bank (Williams) Part #: 01-6451-2
Condition: New
Reset bracket used on 2-bank drop target assemblies in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Drop Target Reset - 3-Bank (Williams) Part #: 01-6451-3
Condition: New
Reset bracket used on 3-bank drop target assemblies in some older Williams games.
Out of Stock
$13.99 each Details | Related Items |
|
| Bracket - Drop Target Reset - 4-Bank (Williams) Part #: 01-6451-4
Condition: New
Reset bracket used on 4-bank drop target assemblies in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Drop Target Reset - 5-Bank (Williams) Part #: 01-6451-5
Condition: New
Reset bracket used on 5-bank drop target assemblies in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Drop Target Reset Plate - 2/3-Bank Drop Targets (Earlier Design) Part #: 01-6452
Condition: New
Used on 2- and 3-bank drop target units in older Williams games approx. 1977-1985 (late electro-mechanical and early... more
In Stock
$4.19 each Order | Details | Related Items |
|
| Flipper Crank - Left Side (Bally/Williams) Part #: 01-6924-L
Condition: New
Left side flipper crank as used on many later-model Bally and Williams games. Also used on Chicago Gaming Vacation... more
In Stock
$5.49 each Order | Details | Related Items |
|
| Flipper Crank - Right Side (Bally/Williams) Part #: 01-6924-R
Condition: New
Right side flipper crank as used on many later-model Bally and Williams games. Also used on Chicago Gaming Vacation... more
In Stock
$5.49 each Order | Details | Related Items |
|
| Flipper Link - Bakelite 1980-1985 (Williams) Part #: 01-6925-1
Condition: New
Discontinued - must use # A-8232-L (left) or A-8232-R... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Bottom - Drop Target 3 Bank (Williams) Part #: 01-7035
Condition: New
Bottom bracket used on 3-bank drop target units in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Drop Target Reset Plate - 2/3-Bank Drop Targets - Early Design (Williams) Part #: 01-7036-E
Condition: New
Drop target reset plate used on 2- and 3-bank drop target units in older Williams games, late electro-mechanical (EM) and early... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Drop Target Reset Plate - 2/3-Bank Drop Targets - Early Design (Williams) (USED) Part #: 01-7036-EU
Condition: Used
Used drop target reset plate used on 2- and 3-bank drop target units in older Williams games, late electro-mechanical (EM) and... more
Out of Stock
$7.00 each Details | Related Items |
|
| Drop Target Reset Plate - 2/3-Bank Drop Targets - Later Design (Williams) Part #: 01-7036-L
Condition: New
Drop target reset plate used on 2- and 3-bank drop target units in older Williams games, late electro-mechanical (EM) and early... more
In Stock
$4.49 each Order | Details | Related Items |
|
| Tension Blade - Drop Target (Williams) Part #: 01-7037
Condition: New
T-shaped metal spring blade used on back of drop targets in some Williams games late 1980 through 1986.
Out of Stock
$3.99 each Details | Related Items |
|
| Bracket - Drop Target 3 Bank (Williams) Part #: 01-7038
Condition: New
Bracket used on 3-bank drop target units in some older Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Coil Support (Williams) Part #: 01-7689
Condition: New
Front coil support/mounting bracket used on some Williams games.
In Stock
$8.99 each Order | Details | Related Items |
|
| Bracket - Coil Front Mounting - 3 Notches w/ Spring Hooks (Bally/Williams) Part #: 01-7695
Condition: New
Front support/mounting bracket for coil. Includes 3 notches on sides and top for securing coil, and features 4 retainer tab... more
In Stock
$5.09 each Order | Details | Related Items |
|
| Bracket - Coil Front Mounting - 3 Notches - No Spring Hooks (Bally/Williams) Part #: 01-7695A
Condition: New
Front support/mounting bracket for coil. Includes 3 notches on sides and top for securing coil. Does not have any retainer tab... more
In Stock
$4.49 each Order | Details | Related Items |
|
| Bracket - Coil Front Mounting - 1 Notch - No Spring Hooks (Bally/Williams) Part #: 01-7695-1
Condition: New
Front support/mounting bracket for coil. Used on flipper assemblies in later-model Bally & Williams games, approx. 1992 and up.... more
In Stock
$1.99 each Order | Details | Related Items |
|
| Bracket - Coil Front Mounting - 1 Notch - No Spring Hooks (Bally/Williams) (USED) Part #: 01-7695-1U
Condition: New
Used front support/mounting bracket for coil for flipper assemblies in later-model Bally & Williams games, approx. 1992 and up.... more
In Stock
$1.99 each Order | Details | Related Items |
|
| Lock Plate - Lift Crank (Bally/Williams) Part #: 01-8390
Condition: New
Locking plate bracket for use on mechanisms on some Bally and Williams games.
In Stock
$6.29 each Order | Details | Related Items |
|
| Plate - Drop Target Reset 3-Bank (Bally/Williams) Part #: 01-8408
Condition: New
Drop target reset plate used on 3-bank drop target assemblies on late model Bally/Williams games.
In Stock
$5.09 each Order | Details | Related Items |
|
| Bracket - Coil Mounting (Bally / Williams) Part #: 01-8413
Condition: New
Coil (solenoid) mounting bracket used on some later-model Bally/Williams games, including Twilight Zone bridge diverter... more
In Stock
$4.39 each Order | Details | Related Items |
|
| Bracket - Support (Bally/Williams) Part #: 01-8494
Condition: New
Support bracket used on some Bally and Williams games.
Out of Stock
$4.59 each Details | Related Items |
|
| Arm - Drop Target Actuator (Knockdown) - Left (Bally/Williams) Part #: 01-8647-L
Condition: New
Small brass arm- or finger- that is actuated by small relay coil to knock down drop target on single drop target units in some... more
In Stock
$15.19 each Order | Details | Related Items |
|
| Arm - Drop Target Actuator (Knockdown) - Right (Bally/Williams) Part #: 01-8647-R
Condition: New
Small brass arm- or finger- that is actuated by small relay coil to knock down drop target on single drop target units in some... more
In Stock
$15.19 each Order | Details | Related Items |
|
| Bracket - Mounting (Bally/Williams) Part #: 01-8693
Condition: New
Obsolete part- replaced by # B-11788 or # B-11861. Mounting bracket used in some Bally / Williams... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Pop Bumper Metal Yoke with Lip (Bally / Midway) Part #: 01-9116
Condition: New
Metal pop bumper link / yoke with reinforcing lip on back edge. Used on pop bumpers on Bally/Midway games from early 1980s to... more
In Stock
$1.85 each Order | Details | Related Items |
|
| Pop Bumper Metal Yoke (Bally / Midway) Part #: 01-9116A
Condition: New
Metal pop bumper link / yoke. Fits most makes/models. Holes for bumper ring/rods measure 1-3/8-inches center-to-center.
In Stock
$1.85 each Order | Details | Related Items |
|
| Pop Bumper Mounting Bracket (Bally / Midway) Part #: 01-9117
Condition: New
Metal pop bumper mounting bracket used on some Bally and Bally/Midway games between 1981-1991.
Out of Stock
$10.53 each Details | Related Items |
|
| Elvira and the Party Monsters (Bally) Boogie Men Rocker Link Part #: 01-9273
Condition: New
Metal rocker link for Boogie Men assembly used in Bally Elvira and the Party Monsters pinball. Measures 3-5/16-inches... more
In Stock
$7.95 each Order | Details | Related Items |
|
| Bracket - Coil Mounting (Williams) Part #: 01-9277
Condition: New
Coil mounting bracket- or plunger guide - for use on most standard coils in many Williams games. Also fits many older Bally... more
In Stock
$5.69 each Order | Details | Related Items |
|
| Bracket - Coil Plunger Stop (Bally/Williams) Part #: 01-9319
Condition: New
Plunger stop bracket for coil plunger assemblies used on some Bally and Williams games.
In Stock
$3.99 each Order | Details | Related Items |
|
| Pop Bumper Yoke - Bakelite (Bally / Midway) Part #: 01-9320
Condition: New
Discontinued - use # 545-5609-00 as replacement. Bakelite pop bumper link / yoke... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Flipper EOS Switch Mounting (Bally/Williams) Part #: 01-9375
Condition: New
Used on flipper baseplates in later-model Bally & Williams games, late 1980s and up. Removable tab/bracket that mounts on... more
Out of Stock
$2.49 each Details | Related Items |
|
| Plate - Drop Target Reset - 5-Bank Drop Targets (Williams) Part #: 01-9384
Condition: New
Discontinued - use # A-13159 as replacement. Reset plate for 5-bank drop target... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Coil (Bally/Williams) Part #: 01-9423
Condition: New
Coil mounting bracket used on some Bally and Williams games. Includes elongated slots for mounting over studs or with... more
In Stock
$8.49 each Order | Details | Related Items |
|
| Plate - Drop Target Reset - 4-Bank Drop Targets (Williams) Part #: 01-9547
Condition: New
Reset plate for 4-bank drop target assemblies used in some older Williams games.
In Stock
$12.00 each Order | Details | Related Items |
|
| Rollergames (Williams) Drive Link Arm Part #: 01-9588
Condition: New
Long metal drive link arm used on Williams Rollergames pinball. Measures approx. 7 inches overall length, 3/8-inches... more
Non-stocked, special-order item. (Contact us for ordering info.)
$12.59 each Details | Related Items |
|
| Terminator 2 (Williams) Gun Turret Coil Mounting Bracket Part #: 01-9595-2
Condition: New
Coil mounting bracket for gun turret kicker assembly on Williams Terminator 2 pinball. Part of full assembly #... more
In Stock
$21.99 each Order | Details | Related Items |
|
| Funhouse / Road Show (Williams) Small Coil Plunger Guide Part #: 01-9677
Condition: New
Small coil plunger guide / bracket for use in head assemblies on Williams Funhouse and Road Show pinballs (Rudy,... more
In Stock
$3.99 each Order | Details | Related Items |
|
| Riverboat Gambler (Williams) Ball Kicker Bracket Part #: 01-9787
Condition: New
Ball kicker bracket used on Williams Riverboat Gambler... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Gilligans Island (Williams) Ball Kicker Bracket Part #: 01-9787-1
Condition: New
Ball kicker bracket used on Bally Gilligans Island... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Coil Mounting (Bally/Williams) Part #: 01-9794
Condition: New
Coil mounting bracket or plunger guide for use on some later-model Bally and Williams games. Includes 2 threaded screw holes... more
In Stock
$6.29 each Order | Details | Related Items |
|
| Bracket - Coil Mounting (Williams) Part #: 01-10008
Condition: New
Coil mounting bracket used on some Williams games.
Out of Stock
$16.95 each Details | Related Items |
|
| Slugfest 92 (Williams) Arm Pitch Drive Part #: 01-10019
Condition: New
Arm pitch drive used on Williams Slugfest baseball... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Coil Mounting (Bally) Part #: 01-10167
Condition: New
Coil retainer bracket used on various mechanisms in some later-model Bally games.
Out of Stock
$6.45 each Details | Related Items |
|
| Terminator 2 (Williams) Gun Turret Kicker Mounting Bracket Part #: 01-10298
Condition: New
Metal mounting bracket for rotating gun turret ball kicker assembly. Part of full assembly #... more
In Stock
$9.49 each Order | Details | Related Items |
|
| Plate - Drop Target Reset - Single Drop Target (Bally/Williams) Part #: 01-10380
Condition: New
Reset plate or finger used for single-bank drop target assemblies used in some later-model Bally and Williams games. Part of... more
In Stock
$4.19 each Order | Details | Related Items |
|
| Party Zone (Bally) Coil Retainer Bracket - Ball Popper Part #: 01-10420
Condition: New
Coil retainer bracket used on ball popper assembly in Bally Party Zone... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Doctor Who (Bally) Motor Mounting Bracket Part #: 01-10421
Condition: New
Mounting bracket for motor in Bally Doctor Who... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Addams Family (Bally) Motor Bracket Part #: 01-10561
Condition: New
Metal bracket for motor used in Bally Addams Family and Addams Family Gold... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Doctor Who (Bally) Plate - Adjustment Part #: 01-10642
Condition: New
Adjustment plate used on elevating mini- Playfield mechanism on Bally Doctor Who... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Eject Coil Bracket (Bally/Williams) Part #: 01-10652
Condition: New
Coil bracket with angled mounting for kickout saucers/holes on some late-model Bally/Williams games.
Out of Stock
$14.30 each Details | Related Items |
|
| White Water (Williams) Whirlpool Housing Eject Bracket Part #: 01-10896
Condition: New
Metal scoop weldment/bracket used for Whirlpool exit / Lost Mine kickout on Williams White Water pinball. Mounts to... more
Out of Stock
$93.75 each Details | Related Items |
|
| Twilight Zone (Bally) Deflector - Center Part #: 01-11063
Condition: New
Center deflector used on Bally Twilight Zone... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Coil Mounting - Kicker / Replay Knocker (Bally/Williams) Part #: 01-11273
Condition: New
Coil mounting bracket as used for replay knocker assembly, rip kicker, or outlane kickback mechanism on many Bally and Williams... more
In Stock
$12.59 each Order | Details | Related Items |
|
| Judge Dredd (Bally) Drop Target Reset Plate Part #: 01-11300
Condition: New
Drop target reset plate used on Bally Judge Dredd... more
Out of Stock
$16.80 each Details | Related Items |
|
| Bracket - Plunger Guide (Williams) Part #: 01-11470
Condition: New
Plunger guide bracket used on Williams Indiana Jones... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Up Down Post Mounting (Williams) Part #: 01-11471
Condition: New
Up/down post mounting bracket used on Williams Indiana Jones... more
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Coil Mounting (Bally/Williams) Part #: 01-11586
Condition: New
Coil mounting bracket used for various devices in many later-model Bally and Williams games.
In Stock
$12.99 each Order | Details | Related Items |
|
| Bracket - Coil Mounting (Bally/Williams) Part #: 01-11800
Condition: New
Coil mounting / plunger guide bracket used on some Bally and Williams late-model games. Has 2 elongated slots for mounting... more
In Stock
$4.19 each Order | Details | Related Items |
|
| Bracket - Ball Gate Coil (Bally/Williams) Part #: 01-12348
Condition: New
Metal u-shaped bracket used to hold coil and frame/eyelet bracket on ball gate actuator assemblies used in some later-model... more
Out of Stock
$9.79 each Details | Related Items |
|
| Coil Mounting Bracket- Diverter (Bally/Williams) Part #: 01-12441
Condition: New
Diverter coil mounting bracket used on some late-model Bally/Williams games.
In Stock
$4.99 each Order | Details | Related Items |
|
| Shadow (Bally) Ball Popper Bracket Part #: 01-13110
Condition: New
Metal bracket for ball vertical up-kicker used on Bally Shadow... more
Out of Stock
$28.69 each Details | Related Items |
|
| Funhouse / Road Show (Williams) Crank Arm Liner - Eyes Part #: 01-13416
Condition: New
Small thin metal springsteel liner that mounts on back of nylon crank arm # A-19258 and acts... more
In Stock
$2.99 each Order | Details | Related Items |
|
| Bracket - Coil Mounting (Bally/Williams) Part #: 01-14123
Condition: New
Coil mounting bracket used on some late-model Bally and Williams games.
Out of Stock - Discontinued more info...
Details | Related Items |
|
| Bracket - Diverter Assembly (Bally) Part #: 01-14616
Condition: New
Coil bracket used for ball diverter assemblies in some late-model Bally games.
In Stock
$29.99 each Order | Details | Related Items |
|
| Bracket - Coil Mounting - Auto-Launch (Bally/Williams) Part #: 01-14618.1
Condition: New
Coil mounting bracket for auto-launch mechanism used on some later-model Bally and Williams games (see game listing below).
In Stock
$11.19 each Order | Details | Related Items |
|
| Bracket - Coil Mounting - Auto-Launch (Bally/Williams) (NON-PLATED) Part #: 01-14618.1-NP
Condition: New
Non-plated metal coil mounting bracket for auto-launch mechanism used on some later-model Bally and Williams games (see game... more
In Stock
$8.99 each Order | Details | Related Items |
|
| No Good Gofers (Williams) Lift Catch Bracket Part #: 01-14739.1
Condition: New
Lift catch bracket for Williams No Good Gofers... more
Non-stocked, special-order item. (Contact us for ordering info.)
$12.59 each Details | Related Items |
|
| Coil Plunger 2-Inch (Bally/Williams) Part #: 02-2364
Condition: New
Coil plunger used for many general devices. Measures 2-inches overall length. Also replaces Gottlieb # A-272.
In Stock
$5.09 each Order | Details | Related Items |
|
| Slugfest 92 (Williams) Roller Drive Arm Part #: 02-2750
Condition: New
Roller drive bearing/bushing used on Williams Slugfest baseball game. Measures 25/32-inch tall, 7/16-inch outer... more
In Stock
$6.00 each Order | Details | Related Items |
|
| Bell Armature Stop - Ball Popper (Bally / Williams) Part #: 02-2963
Condition: New
Used on some Bally and Williams games with ball up-kickers. This stop mounts on the bottom of the up-kicker coil plunger. Use... more
In Stock
$2.89 each Order | Details | Related Items |
|
| Pop Bumper Coil Plunger Part #: 02-3406-1
Condition: New
Coil plunger for pop bumper coil. Has groove at top end for holding metal and fiber links (yokes) which attach to ring/rod. As... more
In Stock
$2.69 each Order | Details | Related Items |
|
| Coil Plunger - 2-1/4 Inch (Williams) Part #: 02-3407
Condition: New
Coil plunger used on many Bally and Williams games. Measures 2-1/4-inch (57mm) overall length. Replaces old Williams # 2A-3407.... more
In Stock
$4.19 each Order | Details | Related Items |
|
| Coil Plunger - 2-1/8 Inch (Williams) Part #: 02-3407-2
Condition: New
Coil plunger used on many Bally and Williams games. Measures 2-1/8-inch (56mm) overall length. Replaces old Williams #... more
In Stock
$5.59 each Order | Details | Related Items |
|