Action Pinball Logo Game Hardware

Order by phone or online: www.actionpinball.com  
 
Phone: (801) 272-0221 - info@actionpinball.com
Salt Lake City, Utah, USA
Search:    Search Tips...   
Quick Links:
- Home Page
- Game Parts & Supplies
- Game Service & Repair
- Pinball Machines for Sale
- Video Games for Sale
- Ordering Info
- Contact Us
Information on this page is subject to change without notice, and may not necessarily be current. All prices are in US Funds.
Pinball:
Game Hardware

Nuts, bolts, screws, washers, springs, and other unique & hard-to-find pinball hardware.
  • Bolts:
      - Backbox Bolts
      - Carriage Bolts
      - Leg Bolts
  • E-Clips
  • Levelers
  • Nuts:
      - Cap Nuts - Playfield
      - KEPS Nuts (built-in washer)
      - Nylock Nuts
      - PAL Nuts (for flipper buttons)
      - Sleeve Nuts
      - Standard Nuts
      - T-Nuts (speed nuts)
      - Tinnerman Nuts (speed nuts)
      - Wing Nuts
  • Plates - Leg Bolt
  • Posts- Playfield, Metal
  • Rivets:
      - Riveting Services / Repairs
      - Rivet Tools
      - Rivets & Rivet Washers
  • Screws:
      - Hex Head Screws
      - Phillips Head Screws
      - Playfield Post Screws
      - Socket Head Screws
      - Torx Head Screws
  • Spacers / Standoffs
  • Spring Steel
  • Springs & Spring Kits
  • Studs - Playfield Post
  • Threaded Plates - Leg Bolt
  • T-Nuts
  • Washers

  • Miscellaneous Hardware Items

  • Backbox Bolts:


    Backbox (Head) Bolts:

    Brand new replacement bolts for backbox mounting on most all makes and models. Several sizes and lengths to choose from, based on the type your game may use. Most are standard 3/8" x 16 bolt size, unless otherwise noted. Use with washers below.

    Got a stripped or stuck bolt? You probably need new t-nuts that go under the bolts (mounting in the main cabinet). See below for new t-nuts!

    Not sure what length you need? Measure the depth of the "neck" on your game (base panel inside the "neck" section on top/back of main cabinet)- from the bottom to the top of the "neck" (where backbox sits). Add 2 inches- that is your required bolt length.

    Bolt length is length of the bolt below the head (ie: below the head to the tip of the bolt).

    Bolt Sizes:
    Measurements in table at right are in inches. Bolts sizes are given in diameter, number of threads per inch, and length. Example:

    (Diameter) - (# Threads/inch) x (Length)
    Bolt Size (Inches):
    (Dia. - # Threads x Length)
    Image: Part #: Price: Order:
    5/16"-18 x 2"
    (Some older EM/woodrail games)
    HWR56 Order
    3/8"-16 x 2"
    (Bally/Williams 1988-up)
    HWR30 Order
    3/8"-16 x 2-1/2" HWR40 Order
    3 inches (76mm)
    (Williams games 1986-1988)
    HWR41 Order
    3/8"-16 x 3-1/2" HWR13 Order
    3/8"-16 x 4
    (Bally/Williams through 1986/1987,
    Gottlieb EM games,
    more...)
    HWR14 Order
    3/8"-16 x 4-1/2 inches
    (Bally mid-late 1980's)
    HWR31 Order

    Bolt, wing - backbox mounting
    Part #: 20-9718
    Condition: New

    Large wing bolt for backbox mounting. As used in Bally & Williams games from approx. 1988 up. Threads measure 3/8-inch... more

    More Info | Related Items | Order
    $4.49 each
    (18 Available)
    Order
    Bolt, Thumb Screw - Backbox Mounting (Gottlieb)
    Part #: FA-162
    Condition: New

    Large thumb-screw bolt for backbox mounting. As used in many later-model Gottlieb and Premier brand games.Threads measure... more

    More Info | Related Items | Order
    $3.69 each
    (4 Available)
    Order

    Carriage Bolts:
    Carriage Bolt, Black - 1/4-20 x 1-1/4 Inch
    Part #: 231-5003-00
    Condition: New

    Black cabinet carriage bolt. Commonly used for backbox hinge mounting, coin door mounting, lockdown bar latch mounting, and... more

    More Info | Related Items | Order
    $0.65 each
    Order
    Bolt, carriage - backbox hinge
    Part #: 4322-01139-12B
    Condition: New

    Short black carriage bolt used to secure backbox hinge from outside on main cabinet side on Bally and Williams games from... more

    More Info | Related Items | Order
    $1.75 each
    Order

    Leg Bolts:
    Leg Bolt - Silver
    Part #: LEGBOLT
    Condition: New

    New leg bolt with acorn style head- 2-1/2 inch thread length (2-13/16 inch total length). Silver metal finish. Standard bolt... more

    More Info | Related Items | Order
    $1.09 each
    (11 Available)
    Order

    E-Clips:
    E-Clips:
    Available in a variety of sizes for most pinball applications.

    Measurements:
    "Diameter" measurement in chart at right is a general size - please click image in the chart to see exact measurements of each e-clip, and to confirm fit for your application before ordering.
    Diameter:
    Image:
    (Click for measurements)
    Part #: Price: Order: Notes:
    1/16" ECLIP1/16 $0.13 each Order  
    1/8" ECLIP1/8 $0.17 each Order  
    3/16" ECLIP3/16 $0.21 each Order Used on flipper crank, outhole kicker, drop targets, and similar devices on Bally late electro-mechanical and early solid-state games (approx. mid-1975 to 1980). Replaces Bally #'s P-6316-5 and P-6316-6, and Stern # 17A-104-25.
    1/4" ECLIP1/4 $0.25 each Order Used on pivots & plunger links for most common devices such as slingshot kickers, eject mechanisms, ball release mechanisms, and similar. Replaces Data East/Sega/Stern # 270-5002-00, 270-5004-00, Bally/Williams # 20-8712-25 and similar others.
    3/8" ECLIP3/8 $0.29 each Order Used on ball shooters on most makes/models. Replaces old-style "horseshoe" clips on older Williams games, and difficult snap-rings on later-model Bally/Williams games. Replaces Bally part # P-2891-8, Stern # 270-5012-00, and others.
    1/2" ECLIP1/2 $0.33 each Order  
    5/8" ECLIP5/8 $0.37 each Order  
    3/4" ECLIP3/4 $0.41 each Order  
    7/8" ECLIP7/8 $0.44 each Order  

    Levelers:
    Heavy-Duty 3-Inch Leg Leveler with Nut
    Part #: LEV3HD
    Condition: New

    3-inch tall swivel base leg leveler with nut. Factory-original parts! Heavy-duty quality for commercial/rugged use.... more

    More Info | Related Items | Order
    $1.50 each
    (6 Available)
    Order
    Nylon Base Leg Leveler with Nut
    Part #: LEV2NYL
    Condition: New

    Heavy-duty 2-1/4 inch tall rigid leg leveler with thick nylon base. Preferred by many to original metal levelers. Thick... more

    More Info | Related Items | Order
    $1.75 each
    Order
    Nut for Leg Leveler or Leg Bolt
    Part #: LEVNUT
    Condition: New

    Replacement heavy-duty nut for leg levelers and leg bolts. Replace stripped or rusted nuts on levelers or add to the inside of... more

    More Info | Related Items | Order
    $0.25 each
    Order
    Rubber Leg Leveler Cups
    Part #: LEV_RFT
    Condition: New

    Great for any floor surface! Round rubber cups fit perfectly under standard pinball leg levelers to protect your floor... more

    More Info | Related Items | Order
    $4.95 set
    Order
    Padded Leg Leveler Cups
    Part #: LEV_CFT
    Condition: New

    Great for any floor surface! These round plastic cups have a cushioned padding on the back and fit perfectly under... more

    More Info | Related Items | Order
    $4.95 set
    Order
    Padded Woodgrain Leg Leveler Cups
    Part #: LEV_WFT
    Condition: New

    Great for hardwood floors! These great light-woodgrain cups blend in fantastically with light hardwood floors, and have... more

    More Info | Related Items | Order
    $7.99 set
    Order

    Nuts - Cap Nuts:
    Rubber Cap Nut - White
    Part #: RINWCAP
    Condition: New

    SOLD INDIVIDUALLY. White rubber cap nut, or 'barrel nut', used to hold flat plastics in place on playfield posts on many makes... more

    More Info | Related Items | Order
    $0.29 each
    Order
    Rubber Cap Nut - Black
    Part #: RINBCAP
    Condition: New

    SOLD INDIVIDUALLY. Black rubber cap nut, or barrel nut, used to hold flat plastics in place on playfield posts on many makes... more

    More Info | Related Items | Order
    $0.29 each
    (135 Available)
    Order

    Nuts - KEPS Nuts:
    KEPS Nuts With Built-In Lock Washer:

    Self-securing nuts with built-in lock washer for many pinball applications. Zinc-plated, common sizes.
    Size: Image: Part #: Price: Order: Notes:
    #6-32 HWR75 Order Commonly used to secure #6-32 screws on playfield mechanical mechansisms (flippers, bumpers, kickers) and to secure dot-matrix score displays in later-model games.
    #8-32 HWR76 Order  
    #10-24 HWR55 Order Commonly used on #10-24 carriage bolts for side-rails on some later-model games.

    Nuts - Nylock Nuts:
    Nylock Nuts:
    Bright shiny new chrome nylock nuts with fresh clean white nylon insert. Make your game look brand new again with new hardware! Frequently used on most makes/models of games to hold down plastics, ramps, and to secure parts on mechanical assemblies above and below playfield.
    Size: Image: Part #: Price: Order: Notes:
    #6-32 HWR2SET
    (Set of 12)
    Order Replaces Bally/Williams # 4406-01119-00. Commonly used for holding down playfield plastics, securing pop bumper brackets, pop bumper ring/rod assemblies, and other coil mounting bracket parts under-playfield. Takes 5/16" socket or wrench. Most common size for use on most games.
    #8-32 HWR3SET
    (Set of 12)
    Order Replaces Bally/Williams # 4408-01119-01. Same as above, but one size larger- brand new #8 size (#8-32) nylock nuts as used for holding down some playfield plastics & parts, wireform ramps, and bumper posts secured under the playfield. Takes 11/32" socket or wrench.
    #10-32 HWR45
    Order Replaces Bally/Williams # 4410-01132-01. Can be used with Stern mini post below (# 535-5005-00).

    Nuts - PAL Nuts:

    Nuts - Sleeve Nuts:
    Playfield Pivot Sleeve Nuts:
    Threaded sleeve nuts that mount on inside of main cabinet wall and act as a pivot or slide pin for the playfield. Attaches to cabinet carriage bolt that installs from outside of cabinet (not included). Used on most Bally/Williams games from mid/late 1980's and up. Commonly worn out or missing in many games.

    Earlier games will use shorter 11/16" nut (02-4329-2) and later-model games with slide-out rails will use longer 7/8" nut (02-4329-1). All have 3/8 x 16 internal thread.
    Length: Image: Part #: Price: Order:
    1/2-inch 02-4329 $2.99 each Order
    7/8-inch 02-4329-1 $2.99 each Order
    11/16-inch 02-4329-2 $4.88 each Order

    Nut, sleeve - backbox hinge
    Part #: 02-4352
    Condition: New

    Black sleeve nut with hex wrench opening used to secure backbox hinge on main cabinet side from interior cabinet side on Bally... more

    More Info | Related Items | Order
    $4.49 each
    Order

    Nuts - Standard Nuts:
    Nut for Leg Leveler or Leg Bolt
    Part #: LEVNUT
    Condition: New

    Replacement heavy-duty nut for leg levelers and leg bolts. Replace stripped or rusted nuts on levelers or add to the inside of... more

    More Info | Related Items | Order
    $0.25 each
    Order

    Nuts - T-Nuts:


    T-Nuts for Playfield Screws & Backbox Bolts

    Replace those broken or stripped t-nuts! Ideal for playfield replacement jobs! Here's what you need if you've ever cross-threaded a playfield post, backbox bolt, or had one snap off when trying to remove! Available in common sizes for playfield posts/studs and backbox bolts. A broken or stripped t-nut can bring your playfield overhaul to a dead stop, or keep that backbox from being removed or secured! Keep a few on hand for valuable spares!

    Type: Image: Part #: Price: Order:
    #6-32 T-Nut
    For older games with smaller screws/studs. Replaces Bally # M-108-15.
    HWR11 Order
    #8-32 T-Nut
    For newer games with larger screws/studs
    Replaces Bally # M-108-9, Bally/Williams # 4408-01118-00
    HWR12 Order
    3/8" x 16 T-Nut
    For 3/8" dia. backbox bolts. Can be used with leg bolts too.
    HWR10 Order

    Nuts - Tinnerman Nuts:
    Tinnerman Nut for Flipper End-of-Stroke (EOS) Switch (Bally/Williams)
    Part #: 20-6516
    Condition: New

    Tinnerman nut for flipper end-of-stroke (EOS) switch mounting. As used on many makes/models. Replaces Bally/Williams # 20-6516.... more

    More Info | Related Items | Order
    $0.80 each
    Order
    Tinnerman Nut, Tilt Bob - 1/8-Inch
    Part #: 20-10289
    Condition: New

    For tilt plumb bob mechanism in many late-model Bally/Williams games. Supports plumb bob on 1/8-inch diameter non-threaded rod... more

    More Info | Related Items | Order
    $1.95 each
    Order

    Nuts - Wing Nuts:

    Posts - Playfield Metal Posts:

    Mini-Post, Metal - Wood Thread
    Part #: 530-5004-00
    Condition: New

    Replacement playfield mini post. Wood thread base. Measures approx. 1-inch tall and installs into playfield wood using 1/4-inch... more

    More Info | Related Items | Order
    $2.49 each
    Order
    Mini-Post w/ no Ring Grove, Metal - Wood Thread
    Part #: 530-5004-01
    Condition: New

    Replacement playfield mini post. Wood thread base. Measures 1-7/16 inches tall and installs into playfield wood using 1/4-inch... more

    More Info | Related Items | Order
    $2.49 each
    Order
    Mini-Post, Metal - 7/8 Inch Machine Thread
    Part #: 530-5005-00
    Condition: New

    Replacement playfield mini post. #10-32 machine thread base. Measures approx. 1-inch tall. This post has 1 groove for a rubber... more

    More Info | Related Items | Order
    $3.95 each
    Order
    Mini-Post, Metal - Machine Thread
    Part #: 13404
    Condition: New

    Replacement playfield mini post. Machine thread base, #8-32 x 3/4 inch. Measures approx. 1-3/4-inch overall length. Installs... more

    More Info | Related Items | Order
    $2.99 each
    (5 Available)
    Order
    Spring, Coil Plunger (Data East)
    Part #: 266-5009-00
    Condition: New

    Coil plunger compression spring used for pop bumpers, vertical up-kickers (VUK), and other devices on some Data East games.... more

    More Info | Related Items
    $3.12 each
    Temporarily out. Please check back.
    more info...

    Playfield Mini Post Assembly: $5.95 ea
    Playfield mini post assembly, including all necessary installation hardware and rubber ring. This large size mini post (#10 size screw thread) is more heavy duty than #6 or #8 size mini posts as used on older games, so makes a great "upgrade" or heavy-duty replacement. Protect your game's valuable parts and playfield surface around mini posts by using a heavy-duty replacement like this. Or grab a few for valuable spares!
    Rubber Color: Image: Part #: Price: Order:
    WHITE 530-5005-00-AW $5.95 each Order
    BLACK 530-5005-00-AB $5.95 each Order

    Playfield Sleeve Post w/ Threaded Top
    Part #: 02-4036-1
    Condition: New

    Playfield metal post that holds rubber sleeve. #8-32 threaded base with #6-32 threaded hole in top.

    More Info | Related Items | Order
    $4.39 each
    (3 Available)
    Order
    Playfield Sleeve Post w/ Threaded Top
    Part #: 02-4659-1
    Condition: New

    Playfield metal post that holds rubber sleeve. #10-32 threaded base with #6-32 threaded hole in top.

    More Info | Related Items | Order
    $2.99 each
    (10 Available)
    Order
    Playfield Bumper Sleeve Post 2-1/4 Inch- Smooth Top, 8/32 Stud (Data East)
    Part #: 530-5057-00
    Condition: New

    Metal bumper sleeve post with flat top. Has #8-32 threaded stud. 2-1/4 inch overall length. Used on some Data East, Sega, and... more

    More Info | Related Items | Order
    $3.95 each
    (6 Available)
    Order
    Playfield Bumper Sleeve Post 2-3/16 Inch- Smooth Top, 8/32 Stud (Data East)
    Part #: 530-5057-01
    Condition: New

    Available by special order- e-mail us. Or use... more

    More Info | Related Items
    $16.38 each
    Call or e-mail
    Playfield Sleeve Post w/ Threaded Top
    Part #: 530-5075-00
    Condition: New

    Playfield metal post that holds rubber sleeve. Used on some Data East and later-model Stern Pinball games. #8-32 threaded base... more

    More Info | Related Items
    $5.63 each
    Call or e-mail
    Playfield Bumper Sleeve Post #6-32 Top #10-32 Stud Base (Stern)
    Part #: 530-5332-01
    Condition: New

    Metal post used on some later-model Stern Pinball games. #6-32 female threaded hole on top. #10-32 threaded stud on bottom.

    More Info | Related Items
    $6.49 each
    Temporarily out. Please check back.
    more info...
    Playfield Bumper Sleeve Post #6-32 Top Stud #10-32 Stud Base (Data East / Stern)
    Part #: 530-5332-03
    Condition: New

    Metal post used on some later-model Stern Pinball games. #6-32 male threaded stud on top. #10-32 threaded stud on bottom.... more

    More Info | Related Items | Order
    $5.62 each
    Order
    Playfield Post, Metal - Single Ring #6 x 1-1/16 Inch
    Part #: 530-5035-01
    Condition: New

    Metal playfield post with groove for single rubber ring. Measures 1-1/16 inch tall, 3/8-inch diameter. Accomodates #6 size... more

    More Info | Related Items | Order
    $3.13 each
    (11 Available)
    Order
    Playfield Post, Metal - Single Ring #8 x 1-Inch
    Part #: 02-4434
    Condition: New

    Metal playfield post with groove for single rubber ring. Measures 1 inch tall, 3/8-inch diameter, accomodates #6 or #8... more

    More Info | Related Items | Order
    $3.59 each
    (10 Available)
    Order

    Riveting Services:
    Professional Riveting Services - In-Shop, Factory-Style
    Part #: RIVSVC
    Condition: New

    Let us do it for you!

    In-shop professional riveting services available, using factory-orginal-style rivets as... more

    More Info | Related Items
    $20.00 and up
    Call or e-mail

    Rivet Tools:
    Find Rivet Tools on our Tools & Accessories page.



    Rivets & Rivet Washers:

    Click to enlarge
    Rivets & Rivet Washers: Correct factory-style round-top rivets!
    Smooth round-top rivets for use with our RIVSET1 rivet tool & die set (above). Rivets have 1/8-inch diameter shaft, which are used for most all pinball applications. Available in several common pinball lengths:

    6/32 Length: Short rivet, commonly used for thinner applications like riveting metal flaps to ramp entrances (original factory ramps), or thin metal parts to flat plastics.
    8/32 Length: Medium rivet, commonly used for connecting brackets to flat plastics, including plastics parts, signs, and some lamp sockets.
    10/32 Length: Long rivet, commonly used for connecting multiple parts like flasher lamp domes and PC boards to flat plastics.
    9/16 Length: Brass rivet- long. Commonly used for securing switch stacks and mounting brackets on standup targets for most makes and models of games.

    Rivet washers are used with most rivet applications, to help secure the rivet on the back side of the assembly. (Not all parts require a washer- use old part(s) for reference).

    How to determine rivet length: Rivets are available in 1/32-inch length increments. Simply add up the measurements of the thicknesses of the materials you are riveting together, add 1/32-inch for rivet washer (if used), and 2/32 (1/16) for "clinch allowance" which is the portion of the rivet which will be "rolled" or "crushed" on the back side of the assembly. Here is a typical example:
    • Metal bracket on top of a flat plastic: 1/32 inch
    • Flat plastic: 2/32 inch
    • Rivet washer: 1/32 inch
    • Clinch allowance: 2/32 inch
    Total: 6/32 - use 6/32 length rivet.

    Length: Part #: Price Ea: Order:
    6/32 RIV632BN $0.20 each Order
    8/32 RIV832BN $0.22 each Order
    10/32 RIV1032SZ $0.24 each Order
    9/16 RIV916B
    See Note
    Below
    $0.29 each Order
    1/8 ID
    Washer
    HWR72 Order


    NOTE: 9/16 brass rivet (# RIV916B), if used with our Rivet Tool & Die Set above (part # RIVSET1) requires 1/4-inch rivet dies, sold separately below. E-mail us if you need more info.

    Need a different length or type of rivet? E-mail us for more info.
    Need help? Let us do it for you! We provide in-house riveting services. See the "Riveting Services" section above for details.

    Screws - Hex Head:
    Screw, #2-56 x 1/2 HWH (Data East / Sega / Stern)
    Part #: 237-5937-02
    Condition: New

    Available by special order. Or use Phillips head screw # HWR02-020206 as... more

    More Info | Related Items
    $0.62 each
    Call or e-mail

    Screws - Phillips Head:


    Short Phillips-Head Screws - Machine Thread (MS):

    Short standard Phillips-head screws for common pinball applications. Pan-head machine-thread screws for nuts or threaded plates. Standard, with no built-in washer (see SEMS screws below for screws with washers).
    Size x Length: Image: Part #: Price: Order: Notes:
    #6-32 x 3/8" (10mm) HWR6SET Order Sold in sets of 12. Commonly used on flipper bushings, coil brackets, playfield parts mounting, etc.
    #8-32 x 3/8" (10mm) HWR74SET Order Sold in sets of 12. Commonly used for circuit board mounting in Data East games, replacement for flat-head screws on Gottlieb coin doors, etc.
    #8-32 x 3/8" (10mm) HWR26SET Order Sold in sets of 12. BLACK finish screw used for circuit board mounting and flipper & other mechanical assemblies in older Bally games.
    Short Phillips-Head SEMS Screws - Machine Thread (MS):

    SEMS screws have a built-in lock washer.

    Short SEMS Phillips-head screws for common pinball applications. Pan-head machine-thread screws for nuts or threaded plates. Zinc-plated, with built-in internal- or external-point 'star' lock washer.
    Size x Length: Image: Part #: Price: Order: Notes:
    #6-32 x 1/4" (6mm) HWR52 Order Short screw with many common uses including coil plunger guide bracket mounting on pop bumpers, slingshot bumpers, flipper assemblies, etc. in most makes/models. Also used for circuit board mounting in early Williams electronic games.
    #6-32 x 3/8" (10mm) HWR69 Order Used for coil stops and plunger guide brackets on older flipper assemblies and coil mounting brackets for slingshot bumpers, kickers, etc.
    #6-32 x 1/2" (12mm) HWR55 Order Same as HWR69 above but slightly longer. Can be used as substitute for HWR69.
    #8-32 x 1/4" (6mm) HWR70 Order Short screw with many common uses including coil stop mounting on some Bally and Stern solid-state games, coin door hardware mounting, etc.
    #8-32 x 5/8" (16mm) HWR54 Order Used for circuit board mounting in System 9 & up Bally & Williams games (1985-1999).
    #10-32 x 5/8" (16mm) HWR44 Order Used on ball shooter (plunger) assemblies in main cabinet to mount inner backing plate to ball shooter housing. Also used for mounting heat sink to bridge rectifiers on power/driver boards in Williams WPC games 1991-up.
    #4 Phillips-Head Sheet-Metal/Wood-Thread (SMS) Screws:

    Small #4 diameter Phillips-head screws in various lengths. Coarse thread for sheet metal or wood. Commonly used for pop bumper caps, switch stacks, and flipper end-of-stroke switch mounting on many makes/models.
    Thread Length: Image: Part #: Price: Order: Notes:
    3/8-inch HWR64 Order Commonly used for pop bumper caps on Bally EM and early SS games.
    1/2-inch HWR9 Order Used for pop bumper caps on most Data East, Sega, and late-model Stern Pinball games. Also later-model Bally/Williams games- System 11 and WPC, late 1980's and up.
    5/8-inch HWR46 Order Used as mounting screw for single end-of-stroke switch mounting on flipper assemblies on many makes/models. Use two (2) screws per switch. Used with tinnerman nut 20-6516 (above).
    3/4-inch HWR47 Order For thick switch stack or dual switch stack mounting into wood playfield or with tinnerman nut # 20-6516.
    7/8-inch HWR63 Order Used as mounting screw for end-of-stroke switch on flipper assemblies on many makes/models. This longer screw can be used with switch stacks using two switches- for dual flippers or "lane change" switch mounted behind EOS switch. Use two (2) screws per switch. Used with tinnerman nut 20-6516 (above).
    1-inch HWR58 Order  
    1-inch
    Tapered
    HWR68 Order Used with spacer and washer for inlane guide support on many Bally & Williams games. Examples:
     

    Flipper Bushing Nut/Screw Set, 6pcs
    Part #: HWRKIT2
    Condition: New

    For use on many makes/models (see list below). Set of 6 nuts and 6 screws (#6-32 size) for mounting flipper bushing on games... more

    More Info | Related Items | Order
    $1.00 set
    Order
    Ball Cup Screw, Vertical Up-Kicker (VUK)
    Part #: 4106-01152-06
    Condition: New

    Used in Bally and Williams games. Mounting screw for ball cup # 03-8561. Secures cup to coil... more

    More Info | Related Items | Order
    $0.25 each
    Order

    Screws - Playfield Post:
    #6-32 Playfield Post Wood Thread Stud
    Part #: 530-5010-02
    Condition: New

    Stud for playfield plastic posts- #6-32: #6 machine thread on top 32 threads-per-inch pitch, #6 wood screw thread on bottom.... more

    More Info | Related Items | Order
    $1.28 each
    Order
    #6-32 Playfield Post Machine Thread Stud
    Part #: 530-5012-02
    Condition: New

    Stud for playfield plastic posts- #6-32: #6 machine thread on top and bottom, 32-threads-per-inch pitch. For use on most games... more

    More Info | Related Items | Order
    $1.28 each
    Order
    #6-32 Playfield Post Machine Thread Stud - 5/8 Inch top thread
    Part #: 530-5008-00
    Condition: New

    Stud for playfield plastic posts- #6-32: #6 machine thread on top and bottom, 32-threads-per-inch pitch. 5/8-inch height on top... more

    More Info | Related Items | Order
    $1.49 each
    Order
    #8-32 x 2-1/16 Inch Playfield Post, Machine-Thread Stud (6-32 top thread)
    Part #: 02-4424-1
    Condition: New

    Stud for playfield plastic posts. #8-32 thread on bottom, #6-32 thread on top, 2-1/16-inch overall length.

    #8-32 is the... more

    More Info | Related Items | Order
    $3.45 each
    (13 Available)
    Order
    #8-32 x 1-5/8 Inch Playfield Post Machine Thread Stud (5/8 inch top thread)
    Part #: 02-4425-1
    Condition: New

    Stud for playfield plastic posts. #8-32 thread, 5/8-inch top thread, 1-5/8-inch lower portion. Tall top thread is handy for... more

    More Info | Related Items | Order
    $4.43 each
    Order
    #8-32 x 2 Inch Playfield Post, Machine-Thread Stud (5/8 inch top thread)
    Part #: 02-4425-3
    Condition: New

    Stud for playfield plastic posts. #8-32 thread, 5/8-inch top thread, 2-inch lower portion. Tall top thread is handy for... more

    More Info | Related Items | Order
    $4.43 each
    Order

    Playfield Post Machine Thread Screws:
    Screws for playfield posts- #6 and #8 machine thread, various lengths. Phillips-head. Often stripped, broken, or bent on most games. Grab a few for valuable spares!

    Use tee nuts (above) for under-playfield mounting of these screws.
    Size: Length: Image: Part #: Price: Order: Notes:
    #4-40 1-1/2 inch
    (38mm)
    237-5934-00 $0.20 each Order Used for some applications on select Sega games.
    #6-32 1-1/2 inch
    (38mm)
    HWR16 Order  
    #6-32 1-3/4 inch
    (45mm)
    HWR17 Order  
    #6-32 2 inch
    (51mm)
    HWR33 Order  
    #6-32 2-1/2 inch
    (63mm)
    HWR59 Order Used for 2-tier flipper return lane guides on games like Addams Family, Tales of the Arabian Nights and similar.
    #6-32 3 inch
    (77mm)
    HWR60 Order Used for 3-tier flipper return lane guides on games like Star Wars, Getaway and similar.
    #8-32 1-1/2 inch
    (38mm)
    HWR18 Order  
    #8-32 1-3/4 inch
    (45mm)
    HWR19 Order  
    #8-32 1-3/4 inch
    (45mm)
    HWR19 Order Replaces Bally/Williams # 4008-01005-28
    #8-32 2 inch
    (51mm)
    HWR49 Order Replaces Bally/Williams # 4008-01005-32
    Playfield Post Wood Thread Screws:
    Screws for playfield posts- #6 and #8 wood thread, various lengths. Phillips-head. Often stripped, broken, or bent on most games. Grab a few for valuable spares!
    Size: Length: Image: Part #: Price: Order:
    #6 1-1/2 inch
    (38mm)
    HWR20 Order
    #6 1-3/4 inch
    (45mm)
    HWR21 Order
    #8 1-1/2 inch
    (38mm)
    HWR22 Order
    #8 1-3/4 inch
    (45mm)
    HWR23 Order

    Screws - Socket Head:
    Flipper Coil Stop Screw/Washer Set - Bally/Williams/Gottlieb Games (4pcs)
    Part #: HWR42SET
    Condition: New

    #10-32 x 3/8 black cap screws with lock washers (2 of each per set). Used on later-model Bally, Chicago Gaming, Gottlieb, and... more

    More Info | Related Items | Order
    $0.98
    Order

    Screws - Torx Head:
    Screw, Security Torx - SMS Wood Thread Black #8 x 5/8 Inch
    Part #: 4108-01092-10B
    Condition: New

    Security Torx wood-thread (SMS) screw. 5/8-inch overall length. Black. Used to secure cabinet trim/hardware parts on some... more

    More Info | Related Items | Order
    $0.72 each
    Order

    Spacers / Standoffs:
    Spacer Set - Flipper Return Lane Guide (3pcs)
    Part #: HWR71SET
    Condition: New

    3-piece set including metal tube spacer, washer, and correct Phillips-head screw, for flipper return lane guide support on many... more

    More Info | Related Items | Order
    $1.99 set
    Order
    Spacer- Metal, 1/2 x 5/32 Inch (Flipper Return Lane Guide Support)
    Part #: HWR71
    Condition: New

    Small metal tubular spacer, as used on many Bally and Williams games. Commonly used to support the top end of metal lane guides... more

    More Info | Related Items | Order
    $1.49 each
    Order
    Spacer- Metal, 11/32 x 5/32 Inch (Flipper Return Lane Guide Support)
    Part #: HWR73
    Condition: New

    Small short metal tubular spacer, as used on many Bally and Williams games. This shorter spacer is used at the top of... more

    More Info | Related Items | Order
    $0.99 each
    Order
    Spacer - Ball Trough Switch Guard (Stern)
    Part #: 254-5014-03
    Condition: New

    Small 1/4-inch spacer that mounts on far left end of ball trough and supports metal guard that covers microswitches in the... more

    More Info | Related Items
    $0.55 each
    Currently Unavailable
    more info...
    Plastic Spacer, Black - #6 x 0.541 Inch
    Part #: 03-8022-1
    Condition: New

    Black plastic spacer commonly used to mount flat plastic and metal parts in various locations on playfield. Measures 0.541-inch... more

    More Info | Related Items | Order
    $1.11 each
    (12 Available)
    Order
    Plastic Spacer, Black - #6 x 0.666 Inch
    Part #: 03-8022-7
    Condition: New

    Black plastic spacer commonly used to mount flat plastic and metal parts in various locations on playfield. Measures 0.666-inch... more

    More Info | Related Items | Order
    $0.72 each
    (10 Available)
    Order
    PCB Standoff, White Nylon - 5/16 Inch
    Part #: 03-8338-1
    Condition: New

    Small white nylon PC board standoff. 1/4-inch diameter, 5/16-inch height (below board), 7/16-inch overall height. Fits in... more

    More Info | Related Items | Order
    $0.25 each
    Order
    3/8 Inch PCB / Display Standoff, Adhesive-Backed (Bally / Williams)
    Part #: 03-8088-1
    Condition: New

    White nylon PCB standoff with adhesive backing. Used on some Bally and Williams games for score display or other PCB mounting.... more

    More Info | Related Items | Order
    $0.98 each
    Order
    Plastic Spacer, Black - #8 x 0.260 Inch
    Part #: 03-9255-1
    Condition: New

    Black plastic spacer commonly used to mount flat plastic and metal parts in various locations on playfield. Measures 0.260-inch... more

    More Info | Related Items
    $0.49 each
    Call or e-mail
    Plastic Spacer, Black - #8 x 0.541 Inch
    Part #: 03-9255-3
    Condition: New

    Black plastic spacer commonly used to mount flat plastic and metal parts in various locations on playfield. Measures 0.541-inch... more

    More Info | Related Items
    $1.29 each
    Currently Unavailable
    more info...
    Plastic Spacer, Black - #8 x 0.666 Inch
    Part #: 03-9255-4
    Condition: New

    Black plastic spacer commonly used to mount flat plastic and metal parts in various locations on playfield. Measures 0.666-inch... more

    More Info | Related Items
    $1.12 each
    Currently Unavailable
    more info...
    Plastic Spacer, Black - #8 x 0.733 Inch
    Part #: 03-9255-5
    Condition: New

    Black plastic spacer commonly used to mount flat plastic and metal parts in various locations on playfield. Measures 0.733-inch... more

    More Info | Related Items
    $1.12 each
    Call or e-mail
    Power Supply Shield Holder - Bally Games
    Part #: M-1829-3
    Condition: New

    Nylon standoff or "holder" for the clear plastic protective shield that mounts over the top of the power supply... more

    More Info | Related Items | Order
    $0.99 each
    (4 Available)
    Order

    Hex Post Standoffs - Metal: - For all makes and models -

    Metal hex spacers in various lengths. 1/4-inch width. These spacers have #6-32 internal threads on either end to accept screws or to fit on threaded studs on playfield posts. Replacements for late-model Data East, Sega, and Stern Pinball parts, but can be used on any make or model.

    Need a spacer not listed here? Other lengths available- just call or e-mail us.
    Length: Image: Part #: Price: Order:
    1-inch 254-5008-06 $1.95 each Order
    1-1/4 inch 254-5008-11 $2.19 each Order
    2-1/4-inch 254-5008-18 $2.39 each Order
    3-inch 254-5008-14 $1.79 each Order

    Spring Steel:
    Spring Steel 5 x 6 Inch Sheet - 0.006 Inch Thickness
    Part #: SPSTEEL06
    Condition: New

    5 x 6 inch (approx.) piece of 0.006-inch thick blued spring steel. Ideal for making your own replacement ramp and hinge flaps.... more

    More Info | Related Items | Order
    $5.99 each
    Order

    Springs & Spring Kits:
    Spring, Outhole Kicker Plunger Return (Bally/Williams)
    Part #: 10-101-4
    Condition: New

    Return extension spring for outhole kicker mechanism as used on Bally and Williams games. Will also fit/work on Data East and... more

    More Info | Related Items | Order
    $0.89 each
    (17 Available)
    Order
    Spring, coil plunger - long/tapered (Bally/Williams)
    Part #: 10-128
    Condition: New

    Longer spring with tapered end, commonly used on ball eject units, kick-out saucer units, slingshot bumper kickers, etc.... more

    More Info | Related Items | Order
    $1.60 each
    Order
    Spring, Coil Plunger Return
    Part #: 10-135
    Condition: New

    Standard coil plunger compression spring used on many different pinball devices including flippers on older vintage games, pop... more

    More Info | Related Items | Order
    $0.89 each
    (18 Available)
    Order
    Ball Shooter Internal Spring (Strongest Strength)
    Part #: 10-148-2
    Condition: New

    Highest strength plunger spring as used on some games requiring extra power to get the ball up a ramp or loop and onto the... more

    More Info | Related Items | Order
    $0.95 each
    Order
    Ball Shooter Internal Spring (Strong Strength)
    Part #: 10-148-3
    Condition: New

    Strong strength plunger spring. 0.038-inch diameter wire. Used on select games, or standard games to give them a bit more... more

    More Info | Related Items | Order
    $0.95 each
    Order
    Ball Shooter Internal Spring (Standard Strength)
    Part #: 10-148-4
    Condition: New

    Standard strength plunger spring as used on most games. 0.033-inch diameter wire. Put some "spring" back in your... more

    More Info | Related Items | Order
    $0.95 each
    Order
    Ball Shooter Internal Spring (Low Strength)
    Part #: 10-148-6
    Condition: New

    Low strength plunger spring. 0.26-inch diameter wire. Used on games with short plunger/skill shots like Twilight Zone.... more

    More Info | Related Items | Order
    $0.95 each
    Order
    Ball Shooter External Barrel Spring
    Part #: 10-149
    Condition: New

    Sold individually. Replace that mashed, broken, rusty, or otherwise worn out outer plunger (ball-shooter) spring on your game.... more

    More Info | Related Items | Order
    $0.90 each
    Order
    Spring, Ball Gate Actuator
    Part #: 10-194
    Condition: New

    Long narrow spring used to open upper playfield ball gates on later-model Bally/Williams games including Indiana Jones,... more

    More Info | Related Items | Order
    $1.50 each
    Order
    Extension Spring, 1-Inch (Bally/Williams)
    Part #: 10-275
    Condition: New

    Rigid extension spring used in some Bally, Bally/Midway, and Williams games. Measures 1-inch overall length, 5/16-inch... more

    More Info | Related Items
    $0.85 each
    Currently Unavailable
    more info...
    Spring, Gun Handle Shooter (Bally/Williams)
    Part #: 10-304
    Condition: New

    Small coil spring used for trigger in gun handle shooters used on games like Star Trek: The Next Generation, Terminator... more

    More Info | Related Items | Order
    $1.50 each
    Order
    Extension Spring, 1-1/8-Inch - Red Eject (Bally/Williams)
    Part #: 10-320
    Condition: New

    Red extension spring used for eject mechanisms in many Bally and Williams games. Measures 1-1/8-inch overall length, 1/4-inch... more

    More Info | Related Items | Order
    $0.80 each
    Order
    Coil Plunger Return Spring - Pop Bumper (Bally/Williams)
    Part #: 10-326
    Condition: New

    Coil plunger compression spring used for pop bumpers on many later-model Bally and Williams games. Can be used for other... more

    More Info | Related Items | Order
    $0.89 each
    Order
    Flipper Coil Plunger Return Spring, Tapered (Bally/Williams)
    Part #: 10-376
    Condition: New

    Large tapered coil spring for flipper coil plunger. As used on Williams games from 1980-1991 (Firepower through... more

    More Info | Related Items | Order
    $0.72 each
    Order
    Diverter Plunger Link Spring
    Part #: 10-389
    Condition: New

    Small spring used as a link between coil plunger and crank on diverter mechanisms in many Bally and Williams games.

    More Info | Related Items | Order
    $1.25 each
    Order
    Spring, Compression - 3/8 x 1-1/4 Inch (Bally/Williams)
    Part #: 10-403
    Condition: New

    Rigid compression spring for use on select Bally and Williams games. Measures 3/8-inch (10mm) x 1-1/4-inch (32mm). Raw finish... more

    More Info | Related Items | Order
    $0.89 each
    Order
    Flipper Coil Plunger Return Spring, Tapered (Bally/Williams)
    Part #: 10-404
    Condition: New

    Large tapered coil spring for flipper coil plunger. As used on Williams games from 1980-1991 (Firepower through... more

    More Info | Related Items | Order
    $0.72 each
    Order
    Spring, Trigger Return (Bally/Williams/Midway)
    Part #: 10-429
    Condition: New

    Trigger return spring used on some Bally, Williams, Midway games. Coiled section measures 1/2-inch diameter.

    More Info | Related Items | Order
    $0.99 each
    Order
    Spring, Torsion - 1/2 Inch Diameter
    Part #: 10-465
    Condition: New

    Torsion spring, 1/2-inch diameter.

    More Info | Related Items | Order
    $1.10 each
    Order
    Spring, Drop Target (Data East/Sega/Stern)
    Part #: 265-5002-00
    Condition: New

    Extension spring for drop targets used on some Data East, Sega, and/or modern Stern Pinball games. Measures 1 inch overall... more

    More Info | Related Items | Order
    $1.99 each
    Order
    Spring, Drop Target (Data East/Sega/Stern)
    Part #: 265-5003-00
    Condition: New

    Extension spring for drop targets used on Data East, Sega, and some modern Stern Pinball games that use the ... more

    More Info | Related Items | Order
    $0.70 each
    Order
    Spring, Flipper Return (Data East / Sega)
    Part #: 265-5029-02
    Condition: New

    Flipper return spring as used on some Data East and early Sega pinball games. Mounts on side of flipper mechanism between... more

    More Info | Related Items | Order
    $0.90 each
    Order
    Spring, Flipper Return (Sega / Stern)
    Part #: 265-5035-00
    Condition: New

    Flipper return spring as used on some late-model Sega and modern Stern Pinball games. Mounts on side of flipper mechanism... more

    More Info | Related Items | Order
    $0.95 each
    Order
    Spring, Coil Plunger (Data East)
    Part #: 266-5009-00
    Condition: New

    Coil plunger compression spring used for pop bumpers, vertical up-kickers (VUK), and other devices on some Data East games.... more

    More Info | Related Items
    $3.12 each
    Temporarily out. Please check back.
    more info...
    Spring, Compression- Mini Eject (Stern)
    Part #: 266-5043-00
    Condition: New

    Small spring used for select devices on some Stern Pinball games.

    More Info | Related Items | Order
    $1.00 each
    Order
    Spring, Pop Bumper Skirt (Data East/Sega/Stern)
    Part #: 266-5048-00
    Condition: New

    Fits most makes and models. This is the short spring (approx. 1/2-inch tall) that goes under the pop bumper and supports the... more

    More Info | Related Items | Order
    $0.92 each
    Order
    Spring - Drop Target Reset, Short (Bally)
    Part #: SP-100-314-S
    Condition: New

    Replacement short spring used for drop targets on many older Bally and Bally/Midway games from mid-1970's through late 1980's.... more

    More Info | Related Items | Order
    $1.39 each
    Order
    Spring - Drop Target Reset, Long (Bally)
    Part #: SP-100-314-L
    Condition: New

    Replacement long spring used for drop targets on many older Bally and Bally/Midway games from mid-1970's through late 1980's.... more

    More Info | Related Items | Order
    $1.65 each
    (12 Available)
    Order
    Flipper Coil Return Spring, Side-Mount - Bally/Midway Linear Flippers
    Part #: SP-100-363
    Condition: New

    Replacement for original side-mounted flipper return spring as used on 'linear' style flipper assemblies used in many Bally and... more

    More Info | Related Items | Order
    $0.90 each
    Order
    Flipper Coil Return Spring, Side-Mount (Gottlieb)
    Part #: A-779
    Condition: New

    DISCONTINUED - listed for reference only - Use 265-5035-00 as... more

    More Info | Related Items

    Discontinued
    more info...
    Spring, Coil Plunger - Tapered
    Part #: 266-5020-00
    Condition: New

    Tapered coil plunger spring commonly used on devices where maximum spring compression is required. Tapered design lets spring... more

    More Info | Related Items | Order
    $2.55 each
    Order
    Spring, Coil Plunger Return
    Part #: 266-5047-00
    Condition: New

    Standard coil plunger compression spring used on many different pinball devices including flippers on older vintage games, pop... more

    More Info | Related Items | Order
    $0.89 each
    Order
    Spring Assortment Kit- 200 Pieces
    Part #: SPRING_KIT
    Condition: New

    Handy pinball repair item! This universal spring assortment kit has many uses for everyday items including many pinball... more

    More Info | Related Items | Order
    $11.95 each
    Order

    Washers:
    Flat Washers:

    Flat washers in various sizes, for various applications:
    Size: Inner Diameter: Image: Part#: Price: Order: Notes:
    #41/8" (3mm) HWR72 Order  
    #65/32" (4mm) HWR36 Order  
    #83/16" (5mm) HWR37 Order  
    #107/32" (6mm) HWR38 Order Replaces Bally/Williams # 4700-00021-00
    7/16" x 1/32"1/8" (3.5mm) 4700-00005-00 $0.19 each Order Pop bumper rod & speaker mounting washer (Bally/Williams)
    1" x 1/8"1/8" (3.5mm) HWR39 Order Fender washer- playfield posts/protection.
    1" x 7/16"7/16" (11mm) HWR32 Order Large washer for 3/8"
    backbox & leg bolts.
    7/8" x 3/8"3/8" (10mm) HWR57 Order Large washer for 5/16"
    backbox bolts (woodrails).

    Washer, Tension - Coil / Solenoid
    Part #: 269-5002-00
    Condition: New

    Used on many games to provide tension on front or back of coil to keep the coil firmly in place when mounted. Will fit/work on... more

    More Info | Related Items | Order
    $0.89 each
    Order
    Nylon Washer - Spinner Target
    Part #: 03-7796
    Condition: New

    Small nylon washer, approx. 1/4-inch diameter. Fits on 0.07-inch diameter wireform, as used on most spinner targets. Two used... more

    More Info | Related Items | Order
    $0.39 each
    (10 Available)
    Order
    Nylon Washer - Wireform Ball Gate
    Part #: 03-7796-1
    Condition: New

    Small nylon washer, approx. 1/4-inch diameter. Fits on 0.04-inch diameter wireform, as used on many wireform ball gates. Will... more

    More Info | Related Items | Order
    $0.50 each
    (10 Available)
    Order

    Miscellaneous Hardware Items:
    Blue Threadlocker Compound, Semi-Permanent
    Part #: PTEX242
    Condition: New

    Keep those nuts & screws in place! Strong non-permanent threadlocker compound keeps nuts and screws in place and... more

    More Info | Related Items | Order
    $3.95 each
    Order
    Cabinet Gliders, White Nylon - 7/8-inch dia. (set of 4)
    Part #: GLIDERS_7/8
    Condition: New

    Set of 4 bright white nylon gliders (7/8" diameter) that will fit on the back of your game (main cabinet). Use on any... more

    More Info | Related Items | Order
    $3.00 set
    Order

    Back to Top

    Back to Home Page