Action Pinball Logo Cabinet & Backbox Parts

Order by phone or online: www.actionpinball.com  
 
Phone: (801) 272-0221 - info@actionpinball.com
Salt Lake City, Utah, USA
Search:    Search Tips...   
Quick Links:
- Home Page
- Game Parts & Supplies
- Game Service & Repair
- Pinball Machines for Sale
- Video Games for Sale
- Ordering Info
- Contact Us
Information on this page is subject to change without notice, and may not necessarily be current. All prices are in US Funds.
Pinball:
Cabinet & Backbox Parts

Interior & exterior parts, ball shooters, pushbuttons, hardware, backglass parts, and more...

Accessories:
Cabinet-Mounted Drink Holder
Part #: DRINKHLDR1
Condition: New

Cabinet leg mounted drink holder. Fits any pinball game with standard 2-1/2-inch leg bolt spacing. Angled mounting bracket... more

More Info | Related Items
$13.49 each
Discontinued
more info...

Backbox Flourescent Lighting:
Starter for 15-24 Inch Fluorescent Lamp
Part #: FS2
Condition: New

New starter for 15 to 24 inch long fluorescent lamp as used in most video games, newer pinball games, and some pinballs from... more

More Info | Related Items | Order
$2.49 each
Order
Ballast - Fluorescent Lamp, 120 Volt 50/60Hz
Part #: BALLAST24
Condition: New

120 volt 50/60Hz ballast for backbox fluorescent lamp, as used in many late-model pinball games and as marquee lighting in many... more

More Info | Related Items | Order
$12.95 each
Order
Bracket, Mounting - Fluorescent Lamp, RIGHT (Sega/Stern)
Part #: 535-7739-01
Condition: New

Right side mounting bracket for backbox fluorescent lamp, as used in late-model Sega and Stern Pinball games.

More Info | Related Items | Order
$8.75 each
Order

Backbox Mounting Hardware:
Bolt, carriage - backbox hinge
Part #: 4322-01139-12B
Condition: New

Short black carriage bolt used to secure backbox hinge from outside on main cabinet side on Bally and Williams games from... more

More Info | Related Items | Order
$1.75 each
Order
Nut, sleeve - backbox hinge
Part #: 02-4352
Condition: New

Black sleeve nut with hex wrench opening used to secure backbox hinge on main cabinet side from interior cabinet side on Bally... more

More Info | Related Items | Order
$4.49 each
Order
Bracket, Speaker/Display Panel Support (Bally/Williams)
Part #: 01-8535
Condition: New

Support bracket for speaker/display panel, as used in many Bally and Williams games from late 1980's to mid 1990's. Mounts to... more

More Info | Related Items | Order
$3.95 each
Order
Plate, Backbox Hinge Mounting (Bally/Williams)
Part #: 01-9012
Condition: New

Used on Bally & Williams games approx. 1988-up. Two used per game. This plate sits in the backbox and the 3 carriage bolts from... more

More Info | Related Items | Order
$5.63 each
Order



Backbox (Head) Bolts:

Brand new replacement bolts for backbox mounting on most all makes and models. Several sizes and lengths to choose from, based on the type your game may use. Most are standard 3/8" x 16 bolt size, unless otherwise noted. Use with washers below.

Got a stripped or stuck bolt? You probably need new t-nuts that go under the bolts (mounting in the main cabinet). See below for new t-nuts!

Not sure what length you need? Measure the depth of the "neck" on your game (base panel inside the "neck" section on top/back of main cabinet)- from the bottom to the top of the "neck" (where backbox sits). Add 2 inches- that is your required bolt length.

Bolt length is length of the bolt below the head (ie: below the head to the tip of the bolt).

Bolt Sizes:
Measurements in table at right are in inches. Bolts sizes are given in diameter, number of threads per inch, and length. Example:

(Diameter) - (# Threads/inch) x (Length)
Bolt Size (Inches):
(Dia. - # Threads x Length)
Image: Part #: Price: Order:

Bolt, wing - backbox mounting
Part #: 20-9718
Condition: New

Large wing bolt for backbox mounting. As used in Bally & Williams games from approx. 1988 up. Threads measure 3/8-inch... more

More Info | Related Items | Order
$4.49 each
(18 Available)
Order
Bolt, Thumb Screw - Backbox Mounting (Gottlieb)
Part #: FA-162
Condition: New

Large thumb-screw bolt for backbox mounting. As used in many later-model Gottlieb and Premier brand games.Threads measure... more

More Info | Related Items | Order
$3.69 each
(4 Available)
Order
Latch - backbox
Part #: 20-9347
Condition: New

Brand new latch mechanism for backbox, as used on Bally & Williams games approx. 1988 up. Can be installed on other... more

More Info | Related Items | Order
$5.95 each
(11 Available)
Order
Plate - Backbox Latch (Bally/Williams)
Part #: 01-8397-1
Condition: New

Replacement latch plate for backbox as used on many makes/models of pinball games. This is a generic aftermarket part that can... more

More Info | Related Items | Order
$1.19 each
Order

Backglass Parts:
Score Display Window Tint Set - 5pcs (Gottlieb)
Part #: PDG377
Condition: New

Replacement blue transparent adhesive films for score display windows on early Gottlieb solid-state games. These replace the... more

More Info | Related Items | Order
$20.00 set
Order

Backglass Lift Trim - 28-1/2", Stainless Steel:
SHIPPING: Large (long) item. Shipping outside the U.S. will require additional cost, due to size (billed separately from your order). E-mail us with your shipping address, and desired quantity, if you need a shipping quote.
Thickness: Image: Part #: Price: Order:
Lift trim, stainless steel - 28-1/2 Inch, for 1/8 inch thick backglassBGTRIMSS1/8$37.95 each Order
Lift trim, stainless steel - 28-1/2 Inch, for 3/16 inch thick backglassBGTRIMSS3/16$37.95 each Order
This is the metal trim, or "lift channel" that goes on the bottom edge of the backglass on most vintage games- used on many makes and models. Measures 28-1/2 inches overall length, and is available in sizes for both earlier 3/16-inch thick backglasses, and later 1/8-inch thick backglasses.

1/8-inch Trim is used on the following games:
Bally: Centaur, Eight Ball Deluxe, Elektra, Embryon, Fathom, Fireball II, Flash Gordon, Frontier, Hotdoggin', Medusa, Mystic, Nitro Groundshaker, Rolling Stones, Silverball Mania, Skateball, Space Invaders, Spectrum, Vector, Viking, Xenon
Stern: Ali, Big Game, Catacomb, Cheetah, Dragonfist, Flight 2000, Freefall, Galaxy, Iron Maiden, Lightning, Meteor, Nine Ball, Orbitor 1, Quicksilver, Seawitch, Split Second, Star Gazer, Quicksilver, Viper
Williams: Alien Poker, Barracora, Black Knight, Jungle Lord, Pharaoh, PinBot, Firepower II, Jungle Lord, Solar Fire, Sorcerer, Space Shuttle

Use with:
- Top and side trim pieces (order below):
Part # BGTRIM3PC1/8 (1/8" thick glasses)
   -or-
Part # BGTRIM3PC3/16 (3/16" thick glasses)
- Backglass Trim Mounting Tape (order above/below).
Backglass Lift Trim - Black Plastic: $7.95 ea. - For 1/8-inch Thick Backglasses - Translite or Silkscreen Printed -

SHIPPING: Large (long) item. Shipping outside the U.S. will require additional cost, due to size (billed separately from your order). E-mail us with your shipping address, and desired quantity, if you need a shipping quote.

Click any description in table at right to see which games each part is used on.

Backglass bottom lift trim, or "lift channel", as used on many makes and models of games that use 1/8-inch thick glass. Black molded plastic. Several pre-cut lengths available. Can be easily trimmed/cut down to fit other size glasses as well.

3/16-inch inner width channel at bottom. Tapered back edge with internal "bead" which pinches against back side of glass/translite to stay on glass securely.

Use with:
- Top and side trim pieces - part # 03-8228-SET (order below).
- Backglass Trim Mounting Tape (optional- order below).
Description: Image: Part #: Price: Order:
Lift trim, backglass - 25-inch black plastic - for 1/8-inch thick backglass03-8229-25$8.95 each Order
Lift trim, backglass - 26-inch black plastic - for 1/8-inch thick backglass03-8229-26$8.95 each Order
Lift trim, backglass - 27-inch black plastic - for 1/8-inch thick backglass03-8229-1$8.95 each Order
Lift trim, backglass - 28-1/2-inch black plastic - for 1/8-inch thick backglass03-8229-28.5$9.95 each Order
Lift trim, backglass - 30-inch black plastic - for 1/8-inch thick backglass03-8229-30$9.95 each Order

Lift trim, backglass - 26-1/16-inch black plastic - for 1/8-inch thick backglass
Part #: 545-6313-01
Condition: New

26-1/16-inch length. Black molded plastic. Used on 1/8-inch thick backglasses. Backglass bottom lift trim, or lift channel, as... more

More Info | Related Items | Order
$9.95 each
(5 Available)
Order




End View of Top Piece
Backglass Molding Set - Black Plastic 3pc: - For backglasses with silkscreen-printed art, or Mylar translite -

SHIPPING: Large (long) item. Shipping outside the U.S. will require additional cost, due to size (billed separately from your order). E-mail us with your shipping address, and desired quantity, if you need a shipping quote.

Click any description in table at right to see which games each part is used on.

Description: Image: Part #: Price: Order:
Trim set, 3-piece - backglass top & sides - for 1/8-inch thick backglassBGTRIM3PC1/8$14.95 set Order
Trim set, 3-piece - backglass top & sides - for 3/16-inch thick backglassBGTRIM3PC3/16$14.95 set Order
3-piece black plastic side and top trim set for backglasses. Can be used on glasses with silkscreened artwork or clear glass with Mylar translite.

Set includes:
  • Two (2) side pieces 24-1/2 inches each
  • One (1) top piece 28-1/2 inches
Pieces can be cut to size to fit shorter edges if required.

Use With:
- Stainless steel lift channel (for 1/8" or 3/16" glasses - order above).



End View of One Piece
Backglass Side/Top Molding Set - Black Plastic 3pc: - For backglasses with Mylar translite -

SHIPPING: Large (long) item. Shipping outside the U.S. will require additional cost, due to size (billed separately from your order). E-mail us with your shipping address, and desired quantity, if you need a shipping quote.

3-piece black plastic side and top trim sets for backglasses on most games that use a Mylar translite held to the back of clear glass. Direct replacement for most Data East and Bally/Williams games- System 11 through WPC-89 and WPC-S games. Set includes two side pieces and one top piece.

See Game Lists below to determine which set is used for your game, or confirm measurements of your game with the info in the table at right.

Use with:
- Lift channel # 03-8229-XX above (available in several lengths- see table above).
Game List: Measurements: Part #: Price: Order:
AInfo coming soon03-8228-SETA$19.95Order
BInfo coming soon03-8228-SETB$19.95Order
CSides (2): 20-5/16 inch ea.
Top (1): 27 inches
Use with lift channel 03-8229-1
03-8228-SETC$19.95Order
DSides (2): 17-1/4 inch ea.
Top (1): 27 inches
Use with lift channel 03-8229-1
03-8228-SETD$19.95Order
ESides (2): 23-1/2 inch ea.
Top (1): 26 inches
Use with lift channel 03-8229-26
03-8228-SETE$19.95Order
FSides (2): 23-3/4 inch ea.
Top (1): 23-3/4 inches
Use with lift channel
# 03-8229-26 (above)
03-8228-SETF$19.95Order

Game Lists:
Trim sets listed in table above are used on the following games:


List A: F-14 Tomcat, Swords of Fury, more...

List B: Black Knight 2000, more...

List C: Atlantis, Black Rose, Bugs Bunny, Dr. Dude, Elvira & the Party Monsters, Game Show, Harley Davidson (Bally), Gilligan's Island, Mousin' Around, Party Zone, Pool Sharks, Radical!, Transporter

List D: Addams Family, Addams Family Gold, Bugs Bunny, Corvette, Creature From the Black Lagoon, Demolition Man, Diner, Dirty Harry, Doctor Who, Dracula, Fish Tales, Flintstones, Funhouse, Getaway (High Speed 2), Harley Davidson, Hurricane, Indiana Jones, Indianapolis 500, JackBot, Johnny Mnemonic, Judge Dredd, Machine: Bride of PinBot, No Fear, Popeye, Riverboat Gambler, Road Show, Rollergames, Shadow, Star Trek: TNG, Terminator 2, Theatre of Magic, Twilight Zone, Whirlwind, White Water, WhoDunnit, World Cup Soccer '94

List E: Data East games: Back to the Future, Batman, Checkpoint, Guns 'n Roses, Hook, Jurassic Park, Laser War, Last Action Hero, Lethal Weapon 3, Maverick, Monday Night Football, Phantom of the Opera, Playboy 35th, Robocop, Rocky and Bullwinkle, Royal Rumble (WWF), Secret Service, Simpsons, Star Wars, Tales From the Crypt, Teenage Mutant Ninja Turtles, Tommy, Torpedo Alley

List F: Bally/Midway games: Black Belt, Blackwater 100, City Slicker, Dungeons & Dragons, Escape From the Lost World, Hardbody, Heavy Metal Meltdown, Karate Fight, Motordome, Party Animal, Special Force, Special Force Girls, Strange Science, Truck Stop

SPECIAL NOTES:
- PinBot uses our trim set BGTRIM3PC1/8, listed above. Cut side pieces to fit. PinBot also uses metal lift trim BGTRIMSS1/8.



End View of Top Piece
Backglass Molding Set - Black Plastic 3pc, Data East & Sega Games: - For backglasses with silkscreen-printed art, or Mylar translite -

SHIPPING: Large (long) item. Shipping outside the U.S. will require additional cost, due to size (billed separately from your order). E-mail us with your shipping address, and desired quantity, if you need a shipping quote.

See game listing below, or click Part # in table at right, to see which games each set is used on.

Game List: Measurements: Part #: Price: Order:
ASides (2): 18-1/8 inch ea.
Top (1): 26 inches
Use with lift channel 545-6313-01
545-5018-SETA$16.95Order
BSides (2): 21-3/8 inch ea.
Top (1): 26 inches
Use with lift channel 545-6313-01
545-5018-SETB$16.95Order
3-piece black plastic side and top trim set for backglasses. Can be used on glasses with silkscreened artwork or clear glass with Mylar translite.

Game Lists:
Trim sets listed in table above are used on the following games:


List A:
SEGA: Apollo 13, Batman Forever, Baywatch, Frankenstein, Godzilla, Golden Cue, Goldeneye, South Park

STERN: 24, AC/DC, Austin Powers, Avatar, Batman, Big Buck Hunter Pro, CSI, Dale Jr., Elvis, Elvis Gold, Family Guy, Grand Prix, Harley Davidson, High Roller Casino, Indiana Jones, Iron Man, Lord of the Rings, Metallica, Monopoly, Mustang, NASCAR, NBA, NFL Pinballs (all), Pirates of the Caribbean, Playboy, Ripley's Believe it or Not!, Roller Coaster Tycoon, Rolling Stones, Sharkey's Shootout, Shrek, Simpsons Pinball Party, Sopranos, Spider-Man, Star Trek, Striker Xtreme, Terminator 3, Transormers, TRON: Legacy, World Poker Tour, X-Men


List B:
DATA EAST: Tales From the Crypt

SEGA: Independence Day, Twister


Use With:
- Black plastic lift channel # 545-6313-01 - order above.

Trim set, 4-piece - backglass top & sides - for 1/8-inch thick backglass
Part #: 03-9420
Condition: New

Black plastic. Includes two (2) side pieces measuring 18-3/4 inch, one (1) top piece 25-3/4 inch, and one (1) bottom lift... more

More Info | Related Items | Order
$26.95 set
Order
Mounting Tape- Backglass Trim
Part #: BGTAPE
Condition: New

Adhesive fabric friction mounting tape used to hold backglass trim pieces to the glass on older vintage games. Can also be used... more

More Info | Related Items | Order
$5.99 each
Order
Trim, speaker/display panel - H channel
Part #: 03-8265-1
Condition: New

For use on Bally & Williams games, approx. 1987-1994. This 'H' shaped plastic channel mounts on top of the speaker/display... more

More Info | Related Items | Order
$12.76 each
Order
Backbox H Channel (Gottlieb/Premier)
Part #: 28717
Condition: New

Black plastic "H" channel for backbox on some late-model Gottlieb and Premier games. Mounts on top of speaker/display... more

More Info | Related Items | Order
$10.95 each
Order

Cabinet Hardware:
Playfield Glass Top Channel: Fits Late-Model Bally/Williams Games & Others

SHIPPING: Large (long) item. Shipping outside the U.S. will require additional cost, due to size (billed separately from your order). E-mail us with your shipping address, and desired quantity, if you need a shipping quote.

Black plastic trim channel that sits at the top (back end) of the playfield glass. Fits late-model Bally & Williams games approx. late 1980's & up- both standard and widebody ("Superpin") models, including Demolition Man, Indiana Jones, Judge Dredd, Popeye, Star Trek: TNG, and Twilight Zone.

Standard width trim also fits Data East games and most other makes/models as well. Attaches to cabinet with screws (not included).
Type/Width: Image: Part #: Price: Order:
Channel, playfield glass top - standard width03-8091$9.95 each Order
Channel, playfield glass top - widebody width03-8091-2$11.93 each Order

Playfield Support Stayarm (Data East / Sega)
Part #: 535-5019-00
Condition: New

Playfield support arm for use on some Data East and Sega pinball games. May be used as replacement on other makes/models as... more

More Info | Related Items | Order
$15.00 each
(1 Available)
Order
Trim, Upper - Coin Door Opening 1965-1982 (Williams)
Part #: 01-4219
Condition: New

NOS factory-original part! Metal trim piece that goes across top of coin door opening on multi-slot coin doors used on most... more

More Info | Related Items | Order
$12.50 each
(6 Available)
Order
Molding, Coin Door Edge (Gottlieb)
Part #: B-8089
Condition: New

Right side coin door edge molding used on some Gottlieb electro-mechanical (EM) pinball games. Used to help secure coin door... more

More Info | Related Items | Order
$30.00 each
(5 Available)
Order
Tape - side-rail mounting
Part #: RAILTAPE
Condition: New

39-inch (1 meter) roll of double-sided adhesive foam tape used for mounting metal side-rail to cabinet on Bally/Williams games... more

More Info | Related Items | Order
$3.50 roll
Order
Cabinet Gliders, White Nylon - 7/8-inch dia. (set of 4)
Part #: GLIDERS_7/8
Condition: New

Set of 4 bright white nylon gliders (7/8" diameter) that will fit on the back of your game (main cabinet). Use on any... more

More Info | Related Items | Order
$3.00 set
Order
Carriage Bolt, Black - 1/4-20 x 1-1/4 Inch
Part #: 231-5003-00
Condition: New

Black cabinet carriage bolt. Commonly used for backbox hinge mounting, coin door mounting, lockdown bar latch mounting, and... more

More Info | Related Items | Order
$0.65 each
Order
Bolt, carriage - backbox hinge
Part #: 4322-01139-12B
Condition: New

Short black carriage bolt used to secure backbox hinge from outside on main cabinet side on Bally and Williams games from... more

More Info | Related Items | Order
$1.75 each
Order

Playfield Alignment / Flipper Spring Mount Bracket:
Used in late-model Sega and Stern pinball games. This bracket is used for two purposes in these games- as a playfield alignment bracket (found attached to the inside wall of the front of main cabinet) to keep playfield centered when in the lowered (normal) position. Also used on flipper assemblies as a mounting tab for one end of the flipper return spring.
Side: Image: Part #: Price: Order:
Bracket, Right - Flipper Spring & Playfield Alignment (Stern)535-7354-00$2.70 each Order
Bracket, Left - Flipper Spring & Playfield Alignment (Stern)535-7354-01$2.70 each Order

Other hardware items listed on our Game Hardware page.
Bell & Chime Parts:
Bell Striker Arm (Gottlieb)
Part #: A-2522
Condition: New

Bell striker or clapper arm for use on bell mechanisms in many early Gottlieb electro-mechanical (EM) games.

More Info | Related Items
$11.95 each
Call or e-mail
Coil Plunger, Knocker / Chime / Bell - 2-1/2-Inch (Williams)
Part #: A-5387
Condition: New

Coil plunger for replay knocker and scoring chimes/bells, as used in many Williams games, old and new. Measures 2-1/2-inches... more

More Info | Related Items | Order
$4.95 each
(3 Available)
Order
Rubber Grommet - Chime Bar
Part #: 23-6330
Condition: New

Black rubber grommet used on chime bar (2 per bar) in most makes and models of games that used chimes for scoring. Original... more

More Info | Related Items | Order
$1.20 each
(52 Available)
Order
Rubber Grommet - Coil Plunger Rest
Part #: 23-6420
Condition: New

Rubber grommet used on coil brackets as a rest for the coil plunger. Used on such devices as replay knockers, bells, chimes,... more

More Info | Related Items | Order
$0.40 each
Order

Chime & Bell Coils (Solenoids):
Common coils for most makes/models. See our Coils/Solenoids page for full listing.

Coin Box Parts:
Coin Box - Black Plastic
Part #: 545-5090-00
Condition: New

Brand new black plastic coin box as used on modern Stern Pinball games but will also fit many other makes/models with most 2-... more

More Info | Related Items | Order
$14.95 each
Order
Coin Box Lid - Metal, With Handle
Part #: 535-5013-03
Condition: New

Brand new metal coin box lid as used on modern Stern Pinball games but will also fit many other makes/models with most 2- or... more

More Info | Related Items | Order
$24.95 each
(1 Available)
Order

Coin Door Parts:
25-cent (US/Canada) Coin Mechanism
Part #: COINMECH25
Condition: New

SEE FITMENT NOTES BELOW BEFORE ORDERING.

25-cent coin mechanism designed for use with U.S.... more

More Info | Related Items | Order
$27.25 each
(3 Available)
Order
Coin Door Assembly - Standard 2-Slot
Part #: COINDOOR1
Condition: New

Brand new commercial pinball/arcade coin door. Industry modern standard style which will fit most makes and models with... more

More Info | Related Items | Order
$84.15 each
(1 Available)
Order
Coin Mechanism Holder Assy. - Happ Coin Doors
Part #: 42-7355-00D
Condition: New

One-piece coin mechanism holder assembly as used on Happ brand coin doors used on late-model Stern Pinball games. Used on our... more

More Info | Related Items
$12.49 each
Temporarily out. Please check back.
more info...
Coin Door Price Plate - Williams, Red Quarters
Part #: PDG002
Condition: New

Plastic price tag, or 'plate' for coin slots on Williams 2- and 3-slot coin doors, used from mid-1960's to mid-1980's.... more

More Info | Related Items
$3.75 each
Currently Unavailable
more info...
Coin Door Price Plate - Williams, Yellow Dollars
Part #: PDG003
Condition: New

Plastic price tag, or 'plate' for coin slots on Williams 2- and 3-slot coin doors, used from mid-1960's to mid-1980's.... more

More Info | Related Items | Order
$10.00 each
(1 Available)
Order
Coin Entry Chute, White Plastic (Williams)
Part #: 03-7472
Condition: New

White plastic coin entry chute used on late Williams electro-mechanical (EM) and early electronic solid-state (SS) games from... more

More Info | Related Items
$4.25 each
Currently Unavailable
more info...
Trim, Upper - Coin Door Opening 1965-1982 (Williams)
Part #: 01-4219
Condition: New

NOS factory-original part! Metal trim piece that goes across top of coin door opening on multi-slot coin doors used on most... more

More Info | Related Items | Order
$12.50 each
(6 Available)
Order
Molding, Coin Door Edge (Gottlieb)
Part #: B-8089
Condition: New

Right side coin door edge molding used on some Gottlieb electro-mechanical (EM) pinball games. Used to help secure coin door... more

More Info | Related Items | Order
$30.00 each
(5 Available)
Order
25-Cent Coin Entry Plate (Gottlieb)
Part #: C-16566-25
Condition: New

White plastic coin entry plate with red cellophane/Mylar overlay for color. Black printing with "25¢ 1 PLAY".... more

More Info | Related Items
$6.95 each
Currently Unavailable
more info...
10-Cent Coin Entry Plate (Gottlieb)
Part #: C-16566-10
Condition: New

White plastic coin entry plate with red cellophane/Mylar overlay for color. Black printing with "10¢ 1 PLAY".... more

More Info | Related Items
$6.95 each
Currently Unavailable
more info...
5-Cent Coin Entry Plate (Gottlieb)
Part #: C-16566-5
Condition: New

White plastic coin entry plate with red cellophane/Mylar overlay for color. Black printing with "2 NICKELS 1 PLAY".... more

More Info | Related Items | Order
$6.95 each
(1 Available)
Order
Coin Chute Entry Assembly - Pinball / Video (Bally / Midway)
Part #: A090-00087-0000
Condition: New

Coin entry chute assembly as used on many Bally/Midway pinball games and Midway video games including Pac-Man, Ms.... more

More Info | Related Items

Currently Unavailable
more info...
Coin Switch with Trip Wireform (Later-Model Games)
Part #: 42-1075-00
Condition: New

Large microswitch with trip/actuator wire. As used on later-model pinball and other coin-op games. Replaces Data... more

More Info | Related Items | Order
$6.50 each
Order
Coin Switch with Trip Wireform (Older/Vintage Games)
Part #: 42-1351-00
Condition: New

Large microswitch with trip/actuator wire. As used on older-model pinball and other coin-op games. Replaces Bally # E-108-92,... more

More Info | Related Items | Order
$6.50 each
Order
Coin Switch Actuator Wireform, 25-cent Quarters (Bally/Williams)
Part #: 27-1075
Condition: New

Wireform actuator for coin microswitch. Used on 2- and 3-slot Entropy brand coin doors that shipped with many later-model Bally... more

More Info | Related Items | Order
$2.25 each
(24 Available)
Order
Coin Trip Wireform (Williams)
Part #: 27-1093
Condition: New

Pre-bent coin switch trip wire used on some Williams and possibly late-model Bally games. Measures 1-7/8-inch overall length.... more

More Info | Related Items
$0.50 each
Currently Unavailable
more info...

Coin Chute / Coin Slot Entry Plates - Amber: - Late-Model Bally/Williams Games -

Plastic coin chute entry plate, as used on many Bally & Williams games from late 1980's and up. Transparent amber molded plastic.

Fits on original coin doors and Entropy brand doors that used this style plate.

Accept U.S. coins, as listed in table at right. Will also accept other coins that fit slot measurements listed.
Coin: Slot Measurements: Part #: Price: Order:

(Nickels)
 27-1026-1$7.50Order
25¢
(Quarters)
0.083" (2.11mm) wide x 0.96" (24.4mm) high27-1026-3$4.95Order
25¢
(Quarters)
0.12" (3.1mm) wide x 1" (25.5mm) high27-1026-11$7.50Order
25¢
(Quarters)
0.15" (3.9mm) wide x 0.96" (24.4mm) high27-1026-13$7.00Order

Coin Reject Button
Part #: 27-1037
Condition: New

Amber plastic coin reject button for use on select coin doors used on many Bally & Williams games, late 1980s and up. Works... more

More Info | Related Items | Order
$2.50 each
Order
Coin Reject Button Cover
Part #: 27-1038
Condition: New

Amber plastic coin reject button cover/lens for use on select coin doors used on many Bally & Williams games, late 1980s and... more

More Info | Related Items | Order
$1.25 each
(18 Available)
Order
Spring, Compression - Coin Door Reject Button
Part #: 27-1039
Condition: New

Short tapered compression spring used on coin reject button in many later-model Bally and Williams games. Works with reject... more

More Info | Related Items | Order
$0.70 each
Order
Coin Reject Armature
Part #: 27-1082
Condition: New

Black plastic coin reject armature as used on many later-model Bally/Williams games that used the Entropy brand coin door. This... more

More Info | Related Items | Order
$3.95 each
(5 Available)
Order
Backbox Key Hook
Part #: KEY_HOOK
Condition: New

Key hook for holding backbox key. Commonly found on inside of coin door, or mounted to inside of cabinet within arm's reach of... more

More Info | Related Items | Order
$0.99 each
Order
Service Button Assembly - 3 Buttons (Sega / Stern)
Part #: 500-6056-03
Condition: New

Coin door service button assembly with 3 pushbutton switches (all normally open, single-pole, momentary contact). Includes red,... more

More Info | Related Items | Order
$17.95 each
(1 Available)
Order
Service Button Assembly - 4 Buttons
Part #: 5641-12724-00
Condition: New

Coin door service button assembly with 4 pushbutton switches. As used on most Bally & Williams games from late 1980s through... more

More Info | Related Items | Order
$14.95 each
(3 Available)
Order
Service Button Assembly - 3 Buttons
Part #: 5641-09369-00
Condition: New

Coin door service button assembly with 3 pushbutton switches. As used on most Bally & Williams games from late 1970's through... more

More Info | Related Items
$9.95 each
Currently Unavailable
more info...
Red Service Button Cap (Bally/Williams)
Part #: 03-7601-4
Condition: New

Red plastic cap for service/test buttons used inside coin door on many Bally and Williams models.

More Info | Related Items | Order
$0.95 each
Order
Black Service Button Cap (Bally/Williams)
Part #: 03-7601-7
Condition: New

Black plastic cap for service/test buttons used inside coin door on many Bally and Williams models.

More Info | Related Items | Order
$1.49 each
(2 Available)
Order
Coin Door Interlock Switch - 2 Circuit
Part #: 180-5136-00
Condition: New

Used on most later-model games. Push-pull operation, and pull-out to lock. Double pole contacts (2 sets for 2 circuits).... more

More Info | Related Items | Order
$6.95 each
Order
Coin Door Decal - Bally Logo
Part #: M-1895
Condition: New

Diamond-shaped foil decal with Bally logo for coin door. Used on Bally games from early 1970's and up that had the stainless... more

More Info | Related Items | Order
$8.95 each
Order
Coin Door Decal - Bally S.B.A. Dollar
Part #: M-1895-1
Condition: New

Diamond-shaped foil decal with Bally logo and Susan B. Anthony Dollar coin design for coin door. Used on Bally games in late... more

More Info | Related Items | Order
$7.95 each
Order
Credit Button Decal (Chicago Coin / Stern)
Part #: PDG282
Condition: New

Reproduction "Credit Button" decal for use on Chicago Coin and Stern electro-mechanical (EM) and solid-state (SS) games,... more

More Info | Related Items | Order
$2.95 each
Order
Coin Chute Bezel (Stern)
Part #: 1B-142-25
Condition: New

White plastic coin chute entry plate used on late-model Chicago Coin and early Stern pinball games from approx. 1976-1985.

More Info | Related Items
$16.49 each
Call or e-mail

Line Cords, Plugs, Surge Protectors, Power Strips:
Power Cord, Grounded - 8-Foot Flat Brown w/ Wire Leads
Part #: COR001
Condition: New

Great restoration part! Similar to original 3-wire brown power cords as originally used on many vintage solid-state pinball... more

More Info | Related Items | Order
$14.38 each
Order
Power Cord, Grounded - 9-Foot Round Black w/ Wire Leads
Part #: COR002
Condition: New

9-foot long power cord, black, with grounded 3-prong plug end (wall plug), and bare wire leads at the other end (game end).... more

More Info | Related Items | Order
$17.32 each
Order
Power Cord, Grounded - 7-1/2 Foot Round Black w/ Female Plug End
Part #: COR003
Condition: New

7-1/2 foot long power cord, black, with grounded 3-prong plug end (wall plug), and 3-prong female connector plug on the other... more

More Info | Related Items | Order
$8.95 each
Order
Power Cord Adapter for Service Outlet (Bally / Williams)
Part #: COR004
Condition: New

For late-model Bally/Williams WPC-S and WPC-95 games! This 14-inch adapter cord plugs into the unique receptacle on the power... more

More Info | Related Items | Order
$5.95 each
Order
Service Outlet - Cabinet Power
Part #: SER001
Condition: New

Clip-in service outlet, as used on power interface box/panel in most domestic makes and models (U.S. / North America). Provides... more

More Info | Related Items | Order
$3.95 each
Order
Line Cord Plug End, Grounded 3-Prong
Part #: PLUG3PRONG
Condition: New

For all makes and models of games! If you own an electronic (1977 or newer) pinball machine or video game, your game should be... more

More Info | Related Items | Order
$5.50 each
Order
Line Cord Plug End, 2-Prong
Part #: PLUG2PRONG
Condition: New

For use on older electro-mechanical (non-electronic) games which did not require a ground lead. Rugged, durable unit with sleek... more

More Info | Related Items | Order
$3.50 each
Order
Power Strip, 4-Outlet Switched / Surge-Protected
Part #: PSTRIPX4
Condition: New

Protect your game's valuable electronics! This handy and compact 4-outlet power strip features surge protection that will... more

More Info | Related Items | Order
$9.95 each
Order

Replay Knocker Parts:
Replay Knocker Assembly - Vertical Mount, AE-23-800 Coil
Part #: B-10686-1
Condition: New

Complete replay knocker assembly as used in many later-model Bally and Williams games. Can also be used in other makes/models... more

More Info | Related Items | Order
$34.44 each
(3 Available)
Order
Replay Knocker Assembly - Vertical Mount, AE-26-1200 Coil
Part #: B-10686-2
Condition: New

Complete replay knocker assembly as used in many later-model Bally and Williams games. Can also be used in other makes/models... more

More Info | Related Items | Order
$34.94 each
(3 Available)
Order
Replay Knocker / Ball Kickback Assembly - Horizontal or Vertical Mount
Part #: 500-5081-00
Condition: New

Ball kickback assembly used in some Data East and Sega games. Can also be used as a replay knocker mechanism. Includes coil... more

More Info | Related Items
$44.47 each
Temporarily out. Please check back.
more info...
Strike Plate, Replay Knocker (Bally/Williams)
Part #: 01-7525
Condition: New

Metal striker plate for replay knocker assembly, as used in many later-model Bally and Williams games. Can also be used in... more

More Info | Related Items | Order
$4.39 each
(4 Available)
Order
Coil Plunger, Knocker / Chime / Bell - 2-1/2-Inch (Williams)
Part #: A-5387
Condition: New

Coil plunger for replay knocker and scoring chimes/bells, as used in many Williams games, old and new. Measures 2-1/2-inches... more

More Info | Related Items | Order
$4.95 each
(3 Available)
Order
Bracket, Coil Mounting - Kicker / Replay Knocker (Stern)
Part #: 535-5265-00
Condition: New

Coil mounting bracket as used for replay knocker assembly, rip kicker, or outlane kickback mechanism on many Data East, Sega,... more

More Info | Related Items | Order
$12.50 each
(2 Available)
Order
Rubber Grommet - Coil Plunger Rest
Part #: 23-6420
Condition: New

Rubber grommet used on coil brackets as a rest for the coil plunger. Used on such devices as replay knockers, bells, chimes,... more

More Info | Related Items | Order
$0.40 each
Order
Bracket, Coil Mounting Plunger Guide (Stern)
Part #: 535-5203-03
Condition: New

Mounting bracket for front end of coil (plunger guide). As used on most coil mounting brackets, including ... more

More Info | Related Items | Order
$2.25 each
(25 Available)
Order
Coil Sleeve - Flanged - 1-7/8 Inch x 7/16 Inch ID (Standard)
Part #: 03-7067
Condition: New

Plastic coil sleeve, 1-7/8 inches (47.6mm), with flange. Standard size flanged coil for use on devices where coil plunger goes... more

More Info | Related Items | Order
$0.55 each
Order
Coil - AE-23-800 (Bally/Williams)
Part #: AE-23-800
Condition: New

General use coil for many devices in later-model Bally/Williams games. Used for pop bumpers, vertical up-kickers, ball... more

More Info | Related Items | Order
$13.49 each
(3 Available)
Order
Coil Plunger w/ Nylon Tip
Part #: A-6306-2
Condition: New

Standard metal ball plunger with nylon tip for use in kickback lanes, ball-launch (shooter) lanes on games with auto-plunger,... more

More Info | Related Items
$11.95 each
Temporarily out. Please check back.
more info...
Coil Plunger / Armature With Nylon Tip - 3-1/8 Inch Length
Part #: A-15370
Condition: New

Coil plunger with built-in stop and nylon tip. Commonly used on many makes & models, including Addams Family, for... more

More Info | Related Items
$11.95 each
Temporarily out. Please check back.
more info...
Coil Plunger / Armature With Nylon Tip - 3 Inch Length
Part #: A-15371
Condition: New

Coil plunger with built-in stop and nylon tip. Commonly used on many makes & models, including many Bally/Williams games. Used... more

More Info | Related Items | Order
$18.95 each
(1 Available)
Order
Coil - N-26-1200 (Stern)
Part #: N-26-1200
Condition: New

Coil with special flat-edge bobbin used for replay knocker in early Stern electronic solid-state (SS) games 1977-1985. Includes... more

More Info | Related Items | Order
$9.95 each
Order
Coil - N-31-2000 (Stern)
Part #: N-31-2000
Condition: New

Coil with unique bobbin for use in older Stern electronic solid-state games for devices such as scoring chimes, replay knocker,... more

More Info | Related Items
$11.49 each
Call or e-mail
Bracket, Coil Retaining - Non-Threaded
Part #: 01-8-508-S
Condition: New

Retaining bracket used to hold coil to main mounting bracket on many different assemblies on Bally/Williams games, but can be... more

More Info | Related Items | Order
$4.75 each
(5 Available)
Order

Leg Parts & Accessories:
Cabinet Leg Protector Pads (4pcs)
Part #: LEGPADS
Condition: New

Every game should have a set! Set of 4 die-cut soft cloth pads that mount on the back side of each leg on your game, and... more

More Info | Related Items | Order
$11.95 set
Order
Heavy-Duty 3-Inch Leg Leveler with Nut
Part #: LEV3HD
Condition: New

3-inch tall swivel base leg leveler with nut. Factory-original parts! Heavy-duty quality for commercial/rugged use.... more

More Info | Related Items | Order
$1.50 each
(6 Available)
Order
Nylon Base Leg Leveler with Nut
Part #: LEV2NYL
Condition: New

Heavy-duty 2-1/4 inch tall rigid leg leveler with thick nylon base. Preferred by many to original metal levelers. Thick... more

More Info | Related Items | Order
$1.75 each
Order
Rubber Leg Leveler Cups
Part #: LEV_RFT
Condition: New

Great for any floor surface! Round rubber cups fit perfectly under standard pinball leg levelers to protect your floor... more

More Info | Related Items | Order
$4.95 set
Order
Padded Leg Leveler Cups
Part #: LEV_CFT
Condition: New

Great for any floor surface! These round plastic cups have a cushioned padding on the back and fit perfectly under... more

More Info | Related Items | Order
$4.95 set
Order
Padded Woodgrain Leg Leveler Cups
Part #: LEV_WFT
Condition: New

Great for hardwood floors! These great light-woodgrain cups blend in fantastically with light hardwood floors, and have... more

More Info | Related Items | Order
$7.99 set
Order
Nut for Leg Leveler or Leg Bolt
Part #: LEVNUT
Condition: New

Replacement heavy-duty nut for leg levelers and leg bolts. Replace stripped or rusted nuts on levelers or add to the inside of... more

More Info | Related Items | Order
$0.25 each
Order
Leg Bolt - Silver
Part #: LEGBOLT
Condition: New

New leg bolt with acorn style head- 2-1/2 inch thread length (2-13/16 inch total length). Silver metal finish. Standard bolt... more

More Info | Related Items | Order
$1.09 each
(11 Available)
Order
Leg Bolt Plate, Heavy-Duty - Large (Bally/Williams)
Part #: 01-11400-1
Condition: New

Fix those loose legs! Original Williams/Bally part # 01-11400-1- as used in most later-model games from approx. 1989-up, and in... more

More Info | Related Items | Order
$9.95 each
(23 Available)
Order
Heavy-Duty Leg Bolt Plate- Small
Part #: LEGPLATESM
Condition: New

Heavy-duty upgraded leg bolt plate- standard size for older and classic-style games. Quickly and easily repair original... more

More Info | Related Items | Order
$4.95 each
(23 Available)
Order
Leg Bolt Plate - Original Style- Small
Part #: LEGPLATESM1
Condition: New

Original factory leg bolt plate- standard size for older and classic-style games. Great for retaining that original look or the... more

More Info | Related Items
$4.00 each
Currently Unavailable
more info...

Locks & Keys:

Game Locks With Keys:
Single- and double-bitted barrel locks for use on most games- pinball, video, etc. Keep that game locked and unwanted hands and fingers out! Most pinball repairs we do are caused by problems located within elbow's reach of the front door- wires pulled out, coin switches messed up, short-circuits, ball switches pulled apart, etc. Avoid damage or injury by keeping your game locked and safe!

Will fit all standard pinball machines and most video games and other equipment. Locks include TWO keys. Easy to install- requires only a wrench and phillips-head screwdriver.

NOTES:
Size: (Barrel Length) This is the length of the threaded portion of the lock. Most coin doors use 7/8" locks. Backboxes on older Bally and Stern solid-state games will use 1-1/8" locks. Williams solid-state backboxes use 7/8" locks. Click for 7/8" lock diagram. E-mail us with name of your game if you need help selecting a lock.
Single- or Double-Bitted: Single-bitted locks use keys with 'bumps' on 1 side only. Double-bitted locks have 2-sided keys.
Keyed-Alike: Locks in the same barrel length are keyed-alike, so you can use same key with multiple locks that are the same length. Locks that are different lengths will not use the same key (ie: 7/8" locks are keyed differently than 1-1/8" locks).
Type/Size: Image: Part #: Price: Order:
Backbox Lock With Keys - 5/8 Inch, Single-Bitted (Chrome)LOCKSB58$4.50 each Temporarily out.
Please check back.
Backbox Lock With Keys - 5/8 Inch, Single-Bitted (Black)LOCKSB58B$4.50 each Order
Game Lock With Keys - 7/8 Inch, Single-BittedLOCKSB78$4.95 each Order
Game Lock With Keys - 7/8 Inch, Double-Bitted, Keyed-AlikeLOCKDB78$4.95 each Temporarily out.
Please check back.
Game Lock With Keys - 1-1/8 Inch, Single-BittedLOCKSB118$5.95 each Temporarily out.
Please check back.
Game Lock With Keys - 1-1/8 Inch, Double-Bitted, Keyed-AlikeLOCKDB118$5.95 each Order

Lock Tab - 2-1/4-Inch
Part #: LOCKTAB225
Condition: New

Extra long tab, or lock cam, for use on most types of cabinet locks. Ideal if you need a little extra reach or security on your... more

More Info | Related Items | Order
$1.50 each
Order
Lock Tab - 1-9/16-Inch
Part #: LOCKTAB1916
Condition: New

Standard length tab, or lock cam, for use on most types of cabinet locks. Measures 1-9/16-inches long. Square hole that mounts... more

More Info | Related Items | Order
$1.00 each
Order
Backbox Lock & Plate Assy (Bally/Williams)
Part #: A-13379
Condition: New

Backbox lock and plate assembly as used on later-model Bally and Williams games. Plate & lock mounts at top center of... more

More Info | Related Items | Order
$10.19 each
(9 Available)
Order
Plate, Backglass Lock Mounting (Bally/Williams)
Part #: 01-9519
Condition: New

Mounting plate for backglass lock as used on Bally & Williams pinball games- late model. Mounts at top/front of backglass and... more

More Info | Related Items | Order
$2.69 each
(9 Available)
Order

Lockdown Bar Parts:
Decal, High Voltage - Lockdown Bar Latch (Bally / Williams)
Part #: PDG355
Condition: New

This nice looking warning decal mounts on the latch under the front glass lockdown bar on Bally and Williams games, approx.... more

More Info | Related Items | Order
$4.95 each
Order
Lockdown Bar, Chrome (Capcom/Data East/Sega/Stern) (BLEMISH - AS-IS)
Part #: 500-5757-04
Condition: New

Standard-width chrome lockdown bar for use on some later-model Stern Pinball games. Also fits Sega, Data East, and Capcom... more

More Info | Related Items | Order
$125.00 each
(1 Available)
Order




Lockdown Bar Foam Rubber Insulating Strip ("Beer Seal"):
Replace that old worn-out, dried-up, cracked, or missing lockdown bar strip! Fits on the underside of your game's lockdown bar- between bar and playfield glass. For standard or wide-body games. Black foam rubber insulating strip has adhesive backing for quick easy replacement of your old worn out lockdown bar insulation strip. Strip keeps out debris, spilled liquids, and other foreign matter, and provides a good seal between lockdown bar and glass. Can be used on any make/model of pinball machine.

Need a different length? Order the size above that most closely matches the width of your game's playfield glass, and include a note with your order (or separate e-mail) with the length you need, and we'll have one custom-cut for you!
Game Type: Length: Part #: Price: Order:
Standard Width Games (21-inch) Lockdown Bar Foam StripFOAMLB_STD$3.00 each Order
Bally/Williams WPC Widebody Games (1993-1994) Lockdown Bar Foam StripFOAMLB_WB$3.50 each Order
Atari Games Lockdown Bar Foam StripFOAMLB_ATA$4.00 each Order
Bally Widebody Games (1979-1981) Lockdown Bar Foam StripFOAMLB_BWB$4.00 each Order
Data East Widebody Games Lockdown Bar Foam StripFOAMLB_DEWB$3.50 each Order
Gottlieb Sys. 80 Games Lockdown Bar Foam StripFOAMLB_GTBWB$3.50 each Order
Stern Widebody Games Lockdown Bar Foam StripFOAMLB_STWB$3.50 each Order
Williams Widebody Games (1967-1980) Lockdown Bar Foam StripFOAMLB_WMSWB$4.00 each Order

Playfield Mounting Hardware:
Playfield Pivot Sleeve Nuts:
Threaded sleeve nuts that mount on inside of main cabinet wall and act as a pivot or slide pin for the playfield. Attaches to cabinet carriage bolt that installs from outside of cabinet (not included). Used on most Bally/Williams games from mid/late 1980's and up. Commonly worn out or missing in many games.

Earlier games will use shorter 11/16" nut (02-4329-2) and later-model games with slide-out rails will use longer 7/8" nut (02-4329-1). All have 3/8 x 16 internal thread.
Description: Image: Part #: Price: Order:
Playfield Pivot Sleeve Nut - 1/2-Inch02-4329$2.99 each Order
Playfield Pivot Sleeve Nut - 7/8-Inch02-4329-1$2.99 each Order
Playfield Pivot Sleeve Nut - 11/16-Inch02-4329-2$4.88 each Order

Playfield Support Stayarm (Data East / Sega)
Part #: 535-5019-00
Condition: New

Playfield support arm for use on some Data East and Sega pinball games. May be used as replacement on other makes/models as... more

More Info | Related Items | Order
$15.00 each
(1 Available)
Order

Playfield & Backbox Glass:

New Playfield Glass   SORRY - NO SHIPPING - Available for in-shop pickup only.

Brand new scratch-free sheet of clear, extra-strong, tempered safety glass for the playfield on your game. Get rid of that old unsightly scratched-up glass and see all the beauty of your prized game's playfield underneath! A new sheet of glass is a must for any game restoration or overhaul- don't leave off the finishing touch!

Not sure what glass your game uses? E-mail us.

Manufacturer/Model: Price:
All - Standard Width Games
Most makes/models
$65.00
Atari
All games
Call or e-mail
Bally
Canopy-Top Games 1968-1974
(Fireball, Dogies, 4 Million B.C., Circus, etc.)
Call or e-mail
Bally
Solid-State Widebody Games 1979-1981
(Paragon, Future Spa, Hot Doggin', Space Invaders, Embryon)
Call or e-mail
Bally/Williams Widebody
WPC "Superpin" Games 1990+
(Twilight Zone, Indiana Jones, Judge Dredd, etc.)
$71.00
Stern
Solid-State Widebody Games 1980-1981
(Big Game, Cheetah, Flight 2000, Freefall,
Split Second, Iron Maiden, Viper, Orbitor 1)
Call or e-mail
All OthersCall or e-mail


USED - SAVE!
USED Playfield Glass   SORRY - NO SHIPPING - Available for in-shop pickup only.

Save on used glass! We have a variety of used pinball playfield glass in various sizes available. Your choice- starting at $20 each, for standard size.

New Translite (Backglass) Glass   SORRY - NO SHIPPING - Available for in-shop pickup only.

Brand new scratch-free sheet of clear, extra-strong, tempered safety glass to cover and protect the translite (backglass artwork) on your late-model game. Get rid of that old unsightly scratched-up glass and see all the beauty of your prized game's playfield underneath! A new sheet of glass is a must for any game restoration or overhaul- don't leave off the finishing touch!

Not sure what glass your game uses? E-mail us.

Size/Type: Price:
Bally/Williams Games
Most makes/models 1987-1999
Call or e-mail
All OthersCall or e-mail

Plunger (Ball Shooter) Parts:

Ball Shooter Assembly w/ Black Knob
Part #: A-17730
Condition: New

Complete ball shooter assembly with chrome housing and black shooter knob. Can be used as replacement on many later-model Bally... more

More Info | Related Items | Order
$35.69 each
Order
Ball Shooter Assembly w/ Round Silver Knob
Part #: A-17730-1
Condition: New

Complete ball shooter assembly with chrome housing and round silver shooter knob. As used on some late-model Bally and Williams... more

More Info | Related Items | Order
$57.65 each
(2 Available)
Order
Ball Shooter Assembly w/ Black Knob (Data East/Sega/Stern)
Part #: 500-6146-00-04
Condition: New

Complete ball shooter assembly as used on some late-model Data East, Sega, and modern Stern Pinball games. Replaces older Data... more

More Info | Related Items | Order
$37.28 each
Order
Ball Shooter Rebuild Kit - Bally, Chicago Gaming, Data East, Williams
Part #: KIT_PLUNGER1
Condition: New

Ball shooter rebuild kit for use on Bally (late models approx. 1987-up only), Chicago Gaming, Data East (early models only),... more

More Info | Related Items | Order
$10.91 each
Order
Ball Shooter Rebuild Kit - Data East, Sega, Stern Pinball Games
Part #: KIT_PLUNGER2
Condition: New

Contains all replacement/wear parts to rebuild the plunger (ball shooter) on late Data East, Sega, and modern Stern Pinball... more

More Info | Related Items | Order
$10.12 each
Order
Ball Shooter Rebuild Kit - Late Bally/Wiliams w/ Silver Knob
Part #: KIT_PLUNGER3
Condition: New

Ball shooter rebuild kit for use on some late-model Bally and Williams games that use the ball shooter with round silver knob... more

More Info | Related Items | Order
$33.87 each
(2 Available)
Order
Ball Shooter Rod With Black Knob (Bally / Williams)
Part #: 20-9253
Condition: New

Standard replacement ball shooter rod for most makes/models of pinball games. Replaces Bally/Williams part #20-9253-7, Capcom #... more

More Info | Related Items | Order
$6.99 each
Order
Ball Shooter Shaft w/ Round Silver Knob
Part #: 20-9927-1
Condition: New

Ball shooter rod with molded silver knob. Original part for some late-model Bally/Williams games (see listing below). Can also... more

More Info | Related Items | Order
$29.95 each
(2 Available)
Order
Ball Shooter Shaft w/ Pointed Knob
Part #: A-100-15
Condition: New

Ball shooter rod with metal pointed knob. As used on many vintage Bally pinball games. Ideal part for that... more

More Info | Related Items | Order
$10.95 each
(4 Available)
Order
Ball Shooter Rod 7-Inch (Gottlieb)
Part #: A-8833
Condition: New

All-metal ball shooter rod/knob, as used on many Gottlieb pinball games. Measures 7-3/16" from back side of knob to end of rod.... more

More Info | Related Items | Order
$24.95 each
Order
Ball Shooter External Barrel Spring
Part #: 10-149
Condition: New

Sold individually. Replace that mashed, broken, rusty, or otherwise worn out outer plunger (ball-shooter) spring on your game.... more

More Info | Related Items | Order
$0.90 each
Order
Ball Shooter Internal Spring (Medium-High Strength)
Part #: 10-148-1
Condition: New

Medium-high strength plunger spring as used on many games. 0.035-inch diameter wire. Put some "spring" back in your... more

More Info | Related Items | Order
$0.95 each
Order
Ball Shooter Internal Spring (Strongest Strength)
Part #: 10-148-2
Condition: New

Highest strength plunger spring as used on some games requiring extra power to get the ball up a ramp or loop and onto the... more

More Info | Related Items | Order
$0.95 each
Order
Ball Shooter Internal Spring (Strong Strength)
Part #: 10-148-3
Condition: New

Strong strength plunger spring. 0.038-inch diameter wire. Used on select games, or standard games to give them a bit more... more

More Info | Related Items | Order
$0.95 each
Order
Ball Shooter Internal Spring (Standard Strength)
Part #: 10-148-4
Condition: New

Standard strength plunger spring as used on most games. 0.033-inch diameter wire. Put some "spring" back in your... more

More Info | Related Items | Order
$0.95 each
Order
Ball Shooter Internal Spring (Low Strength)
Part #: 10-148-6
Condition: New

Low strength plunger spring. 0.26-inch diameter wire. Used on games with short plunger/skill shots like Twilight Zone.... more

More Info | Related Items | Order
$0.95 each
Order
Ball Shooter Internal Spring (Medium-Low Strength)
Part #: 10-148-7
Condition: New

Medium-low strength plunger spring. 0.28-inch diameter wire. Used on some Bally/Williams and Gottlieb games. Replacement for... more

More Info | Related Items | Order
$0.95 each
Order
Ball Shooter Sleeve, 2-1/4 Inch x 3/8 Inch ID
Part #: 03-7357
Condition: New

Used on most all Williams games with standard type plunger up through year 2000, as well late-model Bally games (1989-up), and... more

More Info | Related Items | Order
$0.79 each
Order
Ball Shooter Washer
Part #: 242-5014-00
Condition: New

Brand new correct replacement! Exact factory-original replacement for this very unique, and hard-to-find washer. Most ball... more

More Info | Related Items | Order
$0.47 each
Order
E-Clip - 3/8-Inch
Part #: ECLIP3/8
Condition: New

3/8-inch e-clip. Used on ball shooters on most makes/models. Replaces old-style "horseshoe" clips on ball shooters on older... more

More Info | Related Items | Order
$0.29 each
Order
Ball Shooter Trim Plate, Chrome (Bally)
Part #: A-3830
Condition: New

Chrome metal ball shooter trim plate with embossed 'Bally' script logo. As used on many Bally machines mid-to-late 1970's... more

More Info | Related Items
$19.95 each
Discontinued
more info...
Ball Shooter Trim Plate, Chrome (Gottlieb / Premier)
Part #: A-8869
Condition: New

Chrome metal ball shooter trim plate. As used on many Gottlieb and Premier machines. Measures 3-inches (76mm) wide,... more

More Info | Related Items | Order
$12.95 each
Order
Ball Shooter Nylon Housing/Bushing (Gottlieb)
Part #: B-8834
Condition: New

Nylon housing/bushing for ball shooter (plunger) as used on many Gottlieb / Premier games. This piece fits under metal trim... more

More Info | Related Items | Order
$3.95 each
Order
Mounting Plate, Ball Shooter (Gottlieb)
Part #: A-8829
Condition: New

Metal mounting/reinforcing plate for ball shooter assembly on front of cabinet on many Gottlieb pinball games.

More Info | Related Items | Order
$1.99 each
Order
Ball Shooter Housing- Chrome
Part #: 21-6645-1
Condition: New

New chrome metal replacement for Williams games mid 1960's through 1999, and Bally games approx. 1987-1999. Can also be used as... more

More Info | Related Items | Order
$18.75 each
Order
Ball Shooter Housing- Black (Stern)
Part #: 535-5067-02
Condition: New

Original equipment replacement for late-model Stern, Sega, and late Data East games. Can also be used as standard replacement... more

More Info | Related Items | Order
$19.43 each
Order
Bushing, Ball Shooter (Stern)
Part #: 280-5010-00
Condition: New

Metal/brass oilite bushing for ball shooter assembly as used on late-model Stern Pinball games. 2 used per game- 1 inside, and... more

More Info | Related Items | Order
$3.99 each
Order
Mounting Plate, Ball Shooter Housing (Bally/Williams)
Part #: 01-3535
Condition: New

Original equipment for Williams games with manual ball shooter, mid 1960's to 1999, and Bally games late 1980's to 1999. Can... more

More Info | Related Items | Order
$3.25 each
Order
Mounting Plate - Ball Shooter Housing (Stern)
Part #: 535-5027-01
Condition: New

Supercedes discontinued part # 535-5027-00. Original equipment for late-model Stern, Sega, and Data East games that use manual... more

More Info | Related Items | Order
$4.95 each
Order
Spring, Gun Handle Shooter (Bally/Williams)
Part #: 10-304
Condition: New

Small coil spring used for trigger in gun handle shooters used on games like Star Trek: The Next Generation, Terminator... more

More Info | Related Items | Order
$1.50 each
Order



Rubber Plunger Tips:   50¢ ea

New rubber tips for all makes/models of plungers.

Click here for full listing, prices, and ordering info on plunger tips and other rubber rings, parts, and ring kits.

Pushbuttons:



Flipper buttons, start buttons, credit buttons, etc. Available in a variety of colors and styles.

Click any image in table at right for more info such as measurements, games each part is used on, etc.

Need a different style or color? E-mail us- we may have it or be able to get it.
Color: Image: Part #: Price ea: Order:
Button - Red Flipper / Start, (Williams)3A-7208$3.49 each Order
Button - White Flipper / Start, (Williams)3A-7500-5$3.49 each Order
Button - Green, Long3A-7531-2$2.95 each Discontinued
Button - Purple, Long3A-7531-3$2.95 each Discontinued
Button - White, Long3A-7531-5$7.49 each Order
Button - Red, Long3A-7531-9$2.95 each Discontinued
Button, Red - Flipper500-5026-32$1.99 each Order
Button, White - Flipper500-5026-38$1.99 each Order
Button - Red Transparent, FlipperA-9284$2.99 each Order
Button - Blue, FlipperA-16883-1$1.49 each Order
Button - Green, FlipperA-16883-2$1.49 each Order
Button - Yellow, FlipperA-16883-6$1.49 each Order
Button - Black, FlipperA-16883-7$1.49 each Order
Button Assembly - White (Bally / Stern)C-904905$4.50 each Order
Button Assembly - Red (Bally / Stern)C-904905R$6.99 each Order
Button Assembly - Red/White (Gottlieb)C-904905RT$4.50 each Temporarily out.
Please check back.
Button Housing - White (Gottlieb)C-13900$2.75 each Order

Flipper Button Mounting Bracket (Gottlieb)
Part #: A-13748
Condition: New

Metal plate or bracket, also known as a strap, used for mounting flipper button housing # ... more

More Info | Related Items | Order
$5.99 each
(5 Available)
Order
Cabinet Start Button Assembly - Yellow Lens
Part #: 20-9663-1
Condition: New

Illuminated start button assembly for cabinet front. Commonly used on later-model Bally and Williams games, possible others.... more

More Info | Related Items | Order
$7.50 each
Order
Cabinet Start Button Assembly - Green Lens
Part #: 20-9663-2
Condition: New

Illuminated start button assembly for cabinet front. Commonly used on later-model Bally and Williams games, possible others.... more

More Info | Related Items | Order
$7.50 each
Order
Cabinet Extra Ball Button Assembly - Orange/Amber Lens
Part #: 20-9663-18
Condition: New

Illuminated extra ball button assembly for cabinet front. Commonly used on some later-model Bally and Williams games with extra... more

More Info | Related Items | Order
$7.50 each
Order
Launch Ball Button, Yellow (Bally/Williams)
Part #: 20-9663-B-2
Condition: New

Large illuminated LAUNCH BALL button as used on many later-model Bally and Williams games. Yellow insert with black text, as... more

More Info | Related Items | Order
$7.99 each
(2 Available)
Order
Launch Ball Button, Red (Bally / Williams)
Part #: 20-9663-B-4
Condition: New

Large illuminated LAUNCH BALL button as used on many later-model Bally and Williams games. Red insert with black text. Measures... more

More Info | Related Items | Order
$7.75 each
Order
Launch Ball Button, Red w/ Wire Harness (Bally / Williams)
Part #: 20-9663-B-4A
Condition: New

Large illuminated LAUNCH BALL button assembly including switch, switch diode, and connected wiring harness. Complete... more

More Info | Related Items | Order
$19.95 each
(1 Available)
Order

Flipper Button Opto Boards:

See our Electronic Parts Page for info and ordering.
Flipper Button Opto Interrupter:

See our Electronic Parts page for info and ordering.

Score Reel Parts:
Score Reel Wiper Contact (Gottlieb)
Part #: A-7516
Condition: New

Brass wiper contact as used on score reels in many Gottlieb electro-mechanical (EM) games. Discontinued part- no longer being... more

More Info | Related Items | Order
$7.95 each
Order
Score Reel Nylon Cam / Gear (Gottlieb)
Part #: A-7522
Condition: New

White nylon gear/cam used in score reel mechanisms in many Gottlieb electro-mechanical (EM) pinball games. Measures 1-inch... more

More Info | Related Items | Order
$3.75 each
Order
Score Reel Drive Armature (Gottlieb)
Part #: 3390255
Condition: New

Score reel drive armature used on many Gottlieb electro-mechanical (EM) games in the 1970's and possibly late 1960's.

More Info | Related Items | Order
$16.50 each
Order
Score Reel Drive Armature (Gottlieb)
Part #: D-15264
Condition: New

Plastic score reel drive armature used on some Gottlieb electro-mechanical (EM) games.

More Info | Related Items | Order
$10.00 each
(2 Available)
Order
Small Leaf Switch, Normally Closed (Gottlieb)
Part #: A-7564
Condition: New

Small leaf switch used in some Gottlieb electro-mechanical (EM) games. Possibly used for score-reel runout switch. Measures... more

More Info | Related Items
$5.95 each
Currently Unavailable
more info...
Score Reel Ratchet / Cam (Williams)
Part #: 03-7272
Condition: New

White plastic ratchet or cam used for 10-position score reels in some Williams electro-mechanical (EM) games. Measures... more

More Info | Related Items | Order
$9.95 each
(12 Available)
Order
Coil Sleeve - 1-5/16 Inch x 7/16 Inch ID
Part #: 03-7066-1
Condition: New

Plastic coil sleeve, 1-5/16 inches (33mm) for short coils as used on EM pinball score reels, stepper units, chime units, some... more

More Info | Related Items | Order
$0.85 each
Order
Coil Plunger, Short - With Nylon Armature (Bally)
Part #: A-2292
Condition: New

Short coil plunger with nylon armature. Used on score reel and similar stepper units in some Bally electro-mechanical (EM)... more

More Info | Related Items | Order
$21.95 each
(6 Available)
Order

Speaker Parts:
Speaker Grille - Main Cabinet, Black Plastic
Part #: 545-5072-03
Condition: New

Black plastic grille used to cover speaker opening in main cabinet bottom in most makes/models of electronic pinball games with... more

More Info | Related Items | Order
$7.06 each
Order

Technical Charts - Laminated:


Sample image - click for larger view
$12.50 each
Great finishing touch to your game restoration! Replace that ugly, torn, stained, dirty, or missing original chart!

As used on many late-model Bally, Williams, and Stern pinball games. These are the technical info charts that originally came stapled to the bottom or side wall of the main cabinet interior. Most originals get damaged or lost over the years. These new charts are hard-laminated for good looks, durability, and protection!

Later-Model Games (1995-up) have tech. sheets that include vital game information including fuse listings/values, coil and flash lamp layout with wire colors and PC board connection points, coil and flashlamp part numbers, lamp matrix diagram and switch matrix diagram with matrix layout and wire colors.

Early-Model Games (pre-1995) have tech. sheets that typically feature just the switch and lamp matrix diagrams.

Great "finishing touch" for any pinball restoration, and always a must for working on your game!

  • Click here for a full listing of Technical Charts with prices and online ordering.

  • Tilt Mechanism Parts:


    Click to enlarge
    Tilt Mechanism Parts: Common replacement parts for tilt mechanisms in most games.

    Item: Image: Part #: Price: Order:
    Tilt Plumb Bob, 5/32 Inch Center Hole20-6502-A$5.99 each Order
    Tilt Plumb Bob, 3/32-Inch Center Hole w/ Thumb Screw535-5029-00$8.25 each Order
    Tinnerman Nut, Tilt Bob - 1/8-Inch20-10289$1.95 each Order
    Tilt Hanger Rod / Wire - 3/32 x 4-3/4 Inch Non-Threaded535-5319-02$2.07 each Order
    Tilt Hanger Rod / Wire - 3/32 x 4-3/16 Inch Non-Threaded12-6452$1.99 each Order
    Tilt Hanger Rod / Wire - 7/64 x 4-3/4 Inch Threaded12-6231$4.00 each Currently Unavailable
    Tilt Hanger Rod / Wire - 5/32 Inch Non-Threaded12-6331$1.59 each Order
    Tilt Bob Assembly - Complete95-0328-00$17.95 each Order
    Bracket- Tilt Hanger Rod Support535-5221-01$3.95 each Order
    Wireform Loop - Tilt Plumb Bob (Stern)535-7563-01$3.69 each Order
    Playfield Tilt Switch w/ Bracket (Gottlieb)B-9141$8.95 each Order

    Other Misc. Cabinet Items:

    Williams Cabinet Instruction Booklet Envelope
    Part #: PDG330
    Condition: New

    Reproduction envelope used to hold the small Instruction Booklet (or "Operator's Handbook") used with solid-state Williams... more

    More Info | Related Items
    $5.95 each
    Currently Unavailable
    more info...

    Back to Top

    Back to Home Page